Replacement Anchor Plate "A" for Yakima LandingPad 1 (QTY 8)

The rectangular nuts fit perfectly in competitor’s cross rails. I wish there was more cross-compatibility between brands. Since auto manufacturer’s can’t seem to get it together to make universal roof mounts following the demise of rain gutters, it’s nice that after-market manufacturers are standardizing some of the basic hardware items.

Etrailer has a surprisingly vast array of inventory, solutions and informed customer representatives. Such a nice thing in this currently crazy world. They have been very helpful.1642387

I bought these for use with Thule's XADAPT11 kayak adapter plate, which came with 20x20mm anchor plates that wouldn't fit my Yakima Whispbar rack without cutting the rubber insert. These are slightly thinner and not as wide and can be slide over the rubber to the correct position.

My only complaint; I couldn't find these anywhere in Canada so ordered them here, only to learn they can't ship to Canada due to Thule restrictions. I had them shipped to family in Michigan who then FedEx'd them to me overnight for $70. Sure wish etrailer would be willing to make an exception for this very small accessory.1344698

Click to Enlarge

by: Joe 03/24/2023

Used these to anchor kayak system to truck rack. Worked fine1542521

Perfect and delivered quickly! 1665721

by: Philip02/07/2018

Have the Yakima rail system on top the Snug Top shell. The landing pads make the connection to the rack possible and also allow for a quick, a easy and secure R&R of the rack when it is not needed. The caps on the Anchor plates when the rack is removed protect the plates and have not yet lost one to wind or my own doing. 473440

Philip

2/7/2019

after a year the landing pads are still working well and happy to report I have not yet lost the caps .I live in a high desert area with extremes of temperature and uv radiation and the plastic is holding up

These are the rectangular washers we needed to attach a gray water hose holder to the Yakima roof rack installed on our T@B 320S Teardrop. It was a chore to find them sold like this and not part of a kit we didn't need. They were quite expensive for what they are, but there is no alternative. It took a while to get them sent to NC, but then, etrailer isn't [online vendor]. At least etrailer had them and we have them now. We are grateful. etrailer has excellent communication and they were sent out promptly. We're just a long way from the warehouse. We will certainly buy from etrailer again.1292520

Very personal and conscientious service. I'm a repeat customer!1562691

by: Stephen02/22/2021

I bought these anchor plates to upgrade my old Yakima Rack for use on my Trailblazer.
The original anchors are shaped like footballs & don't spread out the clamping force as well as the newer design - 2 contact points with the track verses 4. The old style was easier to install, drop them in the slot, rotate clockwise, and you're done. The new style requires popping the plastic end caps off the track and sliding the anchors in from the end. It is not hard to do on a warm day. I don't like messing with automotive plastics when it's cold, too easy to break stuff.964136

Note, these will allow you to adapt a Yakima Y01135, Y01127 or Y01126 roof track to hold a Thule Tracker 430 with TK1 fit kit. These are much less expensive than the Thule part 853-2106 (https://www.etrailer.com/Accessories-and-Parts/Thule/853-2106.html) and provide a larger attachment area. The bolts used on the TK1 fit kit (M6) exactly fit these Yakima Anchor pads.278245

Excellent quality works well with Rhino Rack and Yakima1384029

I wanted to install a solar panel on the roof of my truck camper using the existing Yakima rails. These A nuts worked perfectly.461767

Larry Q.

12/21/2018

Great

Exactly what needed to mount a generic set of crossbars on my 2004 Fleetwood Niagara pop up's factory installed roof rails.202914

Mike

6/11/2016

Still working perfectly after a year.

by: Jason O05/22/2019

Perfect for mounting my Yakima roof rack bases on my Ford Excursion factory roof rails. Good coating that hasn’t shown any rust after going through two Wisconsin winters sitting outside the whole time. 644711

by: Carrie P01/09/2020

These little washers were the missing piece to installing some second hand Yakima racks on my truck. Since getting them, I've hauled my kayaks hundreds of miles, helped numerous friends transport beds, fencing, and more.
They fit well and are holding steady. Solid product, good company, great service.736771

Item is exactly what I needed and these are very difficult to find! Also, I live in Hawaii and shipping was extremely high. Etrailer.com was able to work with me to make this a reasonable purchase. It was fairly painless and shipping was fast. I was able to secure my roof rack with my tracks on top of my truck bed topper. Mahalo, etrailer! 747078

by: Tom D12/19/2020

Used these to put solar panel on Yakima track roof rack on my camper. Worked great. etrailer is service was quick and reliable as always.924900

Items were sent quickly and the price was right. I am using them to bolt down a solar panel on the Yakima tracks on top of my truck camper. Etrailer is great for these type of accessories. They always seem to have what I need.1019139

Exactly what I needed at the price I would expect. ETrailer rocks!!!1387374

They are simple, but necessary. I had the Landing Pads from a previous rack setup but lost the threaded plates somewhere along the way. Needed these to attach the landing pads and bars to my 2004 Coleman Fleetwood Niagara factory rack channels. Work as they should and not too expensive.186404

These are the anchor plates that came with my Yakima landing pads were the same as these "A" plates, and e-trailer is the only place I could find them. The were exactly what I needed.933649

Etrailer usually has the best prices on almost anything that you need for your trailer, camper or whatever. They also have very knowledgeable staff that provide good advice. And the latter is very important in this day and age. A lot of places can sell things for cheap but can't tell you which part two buy. Etrailer provides advice and installation in the like. Keep up the good work. You guys are the go-to place for anything related for trailers - and more!591200

by: James03/05/2022

Perfect fit. Used them on my Yakima HD Bars.1269023

got some free Thule cross bars that came with Z shaped rail plates that were awful. replaced them with these and they fit on my rails perfectly and my cross bars sit nice and snug.1130300

Was looking for these to add an accessory to my tracks. They aren't the easiest things to find in stock - and etrailer came through! I do think it's time to stop shipping via USPS. Packages are now consistently being delayed.1009092

by: Michael 10/19/2021

Exactly the product I needed and fast delivery. Used on tracks to mount a solar panel on truck camper..1182716