LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
(287 reviews)
Price: $22.93
In Stock
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
Item # 328-K-52
Our Price: $22.93
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (287)
- Q & A (0)
- Photos
Command Electronics Trailer Lights - 328-K-52
- Clearance Lights
- Oval
- LED Light
- Red
- 3-3/4L x 1-5/8W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Command Electronics
3-3/4" x 1-5/8" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.
Features:
- Small, oval trailer light serves as either a clearance or side marker light
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base with acrylic lens
- Red lens with red LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- Installation requires a 3/4" hole at desired location for wiring base
- Can be mounted horizontally or vertically
- Available chrome trim ring (sold separately)
- 2-Wire pigtail includes power lead and ground wire
- P2 rated light produces a 90-degree beam pattern
- DOT and SAE compliant
- Assembled in the USA
Specs:
- Overall dimensions: 3-3/4" long x 1-5/8" tall x 1/2" deep
- Distance between mounting holes (center to center): 2-1/2"
- Diodes: 2
- Wire length: 5"
- 1-Year limited warranty
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
K-52 Command Electronics Modern LED Clearance or Side Marker Light w/ Reflex Reflector - Oval - Red Lens - Surface Mount - P2 Rated
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens - 328-K-52
Average Customer Rating: 4.9 out of 5 stars (287 Customer Reviews)
3-3/4" x 1-5/8" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.by: George 10/19/2022
The light is exactly what I need to replace the burned out lamp on my motor home. The staff at etrailer works diligently to provide products and customer service. Shipping is a slow since USPS is utilized for small products.
by: Olga07/02/2022
Reliable performance! Very pleased with this product. We don't have covered storage for our RV so it's exposed to a lot of direct sunlight. Our light consistently works as expected! We highly recommend this light.
Olga M.
7/4/2023
Im pleased to report that after a year we have zero issues with the light. It continues to work perfectly :
by: Tom06/28/2023
I bought these lights to replace the marker lights on my 2007 Winnebago Adventurer as Winnebago told me the manufacturer of the original lights had gone out of business and the lamps and lenses were no longer available. They fit well and look like to originals and being LED they're brighter.
by: Jim S06/20/2023
I ordered one of the amber-lensed units from etrailer a couple of years ago. That one is still working fine and I expect this one will work equally well now and into the future. They're a little pricey for what they are but they're an exact replacement for the ones on my camper, unlike the less-expensive alternatives I've found that have different spacing on the attachment screws. I don't need any more holes in my RV than I've already got, thank you very much.
by: Russ 12/14/2021
It is a treat to be able to get the exact lamp that my 2019 Jayco has for clearance and marker lamps. The 2-diode version is bright and nearly flush to the sides of the trailer (and won't catch branches and brush on those narrow trails). And affordable also, so I bought extra lamps for spares for later.
Russ
12/15/2022
Glad to say that another year in the sun has not faded the lense color and brightness of these lamps.
by: Steven02/04/2023
Purchased to replace the two lower rear corner marker lights that mount to the outside of the body, to the rear of the rear axle. They were received via USPS in good condition, packaged in a bubble envelope. Tested both lights prior to installation, put a dab of sealant at each screw hole and around the hole the wires go through, then installed the lights. Mount holes aligned with those from my previous lights, which was a pleasant surprise. I used heat shrink butt splices to connect, red to hot (+) and white to ground (-) then ran a bead of sealant around the light lens to prevent water from finding its way into the light, which is what caused the original lights to fail. Since these mount to the body below the floor, the wires come out under the floor and are exposed to water thrown off the rear tires, so I also cleaned the area where the wires come through and then applied sealant to prevent water from following the wires and saturating the interior of the body panels (common cause of delamination) and possibly entering the lights from that point.
by: John P08/01/2023
Want to thank you for taking the time to work with me trying to fine a lens for my marker light. It was a direct fit for the original, so now have spare light base, and marker light is fixed.
by: Kim 08/04/2023
Fast service and very reliable. Reasonably priced
by: William libby10/04/2023
Excellent service, call in was professional, great website
by: Eric 08/06/2023
Great service, product is exactly what I needed, works great
by: David 07/31/2023
Quick delivery. Easy to install and still working. Good quality.
by: Larry 05/19/2023
Exactly as advertised. Looks like a perfect replacement on my Winnebago View!
by: Kevin 08/04/2023
Perfect match to my RV, works great. Delivered a day early as well.
by: Mike 08/27/2023
exactly like did one
by: Mark03/29/2022
Package was delivered quicker than expected.Great customer service...
Mark
3/29/2023
Worked as expected.No issues..
by: Walter 08/11/2023
Always fast friendly service ordered on Tuesday had it on Friday!
by: Ronald07/19/2022
Although this light looks the same, it is not. The hole pattern for mounting is different, and when I twisted the wires together, it did not light when turning on the lights. It is in still new condition and I will return it.
Sierra K.
7/22/2022
The distance between the mounting holes, center to center, is 2.5 inches.
by: John 01/12/2023
It perfectly replaced the rear side marker lamp on my '18 Windsport
by: James 08/24/2023
Good prices and fast delivery!
by: James 06/30/2023
Working like new a year later
by: Timothy 05/31/2023
They were easy to install and a perfect match to what was OEM.
by: David 03/13/2023
Exactly what I needed, Etrailer delivers !
by: Donna06/19/2023
Fast delivery and easy to use website. What more do you need?
by: Thomas H07/01/2023
exactly what I needed and quick shippin g.
by: William 06/02/2023
Was the same size as original equipment.
25
287
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- What Quantity is Command Electronics 328-K-52 LED Clearance/Marker Light Sold InThe Command Electronics # 328-K-52 LED Clearance/Side Marker Light is sold individually in a quantity of 1. You can see a product demonstration video by clicking the provided link.
view full answer... - Is There a Three Diode Version of the LED Trailer Clearance or Side Marker Light with Reflex ReflectThe LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 is only available as a two diode option.
view full answer... - What is the Purpose of the Holes In The Lens and Should They Be Sealed To Avoid Water Intrusion? The LED Trailer Clearance or Side Marker Light # 328-K-52 has 2 holes which allow water or moisture which can build up inside the lens to escape and not fill the light. The light can be placed horizontally or vertically which is why you see the 2 sets of drain holes in the lens. The lens will also specify which side/end should be placed on top. You do not want to seal these holes as then if moisture does build up inside the lens it would not be able to escape.
view full answer... - Recommended Red Clearance Light For Travel TrailerThough we do not sell the lens separately. You can purchase The LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens # 328-K-52, The overall dimensions are 3-3/4 inch long x 1-5/8 inches tall x 1/2 inch deep. I attached a review video link below.
view full answer... - Command Electronics Red and Amber LED Trailer Clearance or Side Marker Lights 3-3/4 x 1-5/8 OvalThe Amber LED Trailer Clearance or Side Marker Light with Reflex Reflector # 328-K-51 are sold individually. If you order a quantity of 1, you receive 1. We also have the matching Red LED Trailer Clearance or Side Marker Light with Reflex Reflector # 328-K-52 for the rear of the trailer.
view full answer... - Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker MotorhomeYou will need the Red LED Trailer Clearance or Side Marker Light # 328-K-52 or Amber LED Trailer Clearance or Side Marker Light # 328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the lens.
view full answer... - Replacement Trailer Clearance or Side Marker Light Lenses For 2012 Forest River Sunseeker MotorhomeWe only carry the Amber LED Trailer Clearance or Side Marker Light # 328-K-51 for your 2012 Forest River Sunseeker motorhome. We do not have a replacement lens. We also have the Red LED Trailer Clearance or Side Marker Light # 328-K-52.
view full answer... - Recommended Marker Light To Replace Glo-Brite 122I have a replacement light option for you, but we do not offer a replacement lens for the Glo-Brite 122 at this time. The closest replacement option is the LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens # 328-K-52 if you are needing a red light, or # 328-K-51 if you are needing an amber light. Both of these options measure 3-3/4" long x 1-5/8" tall x 1/2" deep and have mounting holes that are 2-1/2" apart on center as shown in the included diagram. I...
view full answer...
- Recommended Replacement Rear Side Marker Light for 2018 Thor ACE MotorhomeI do have an option for you though I don't have a way of knowing exactly what all lights are on this motorhome. That said, I looked up some photos online and think I found the type of light you're referring to. The LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 looks to be correct for your application and what I recommend using. It measures 3-3/4" long x 1-5/8" tall and has a red lens with oval shape.
view full answer... - How Does The Chrome Trim Ring Fit The Command LED Clearance LightsThe Chrome Trim Ring for Command Electronics Oval LED Clearance or Side Marker Light part # 328-89-386 does just snap over the lens of the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 or part # 328-K-51. You are correct about the videos, I will put in a suggestion for a video that demonstrates both the light and the ring. The 2-Wire pigtail of the LED lights include power lead and ground wire that will connected to the existing wiring with heat shrink...
view full answer... - Weatherproof Sealant Recommendation for Clearance Light Installation on RVTo add a seal around the mounting hardware on your marker lights, like the LED Red # 328-K-52 and Amber # 328-K-51 lights, I recommend checking out the TremPro 644 Silicone Sealant # 0160297 which is designed for use on a wide variety of surfaces so you can use it for the lights, walls, roof, or really anything else on your RV or around the house. If you don't already have a caulk gun you can pick one up from us with part # PTW54295. Attached are some review videos for you to check out.
view full answer... - Recommended Replacement Red and Amber Lights for a 1997 Pleasure Way VanI took a look at what lights are on your 1997 Pleasure Way Van and I wasn't able to find a direct replacement lens. If you have no idea what lights you have then I'd recommend just swapping the light out entirely with the LED Trailer Clearance or Side Marker Light with Reflex Reflector # 328-K-52 for a red lens and # 328-K-51 for an amber lens.
view full answer... - Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y LightsFrom what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use as replacements. I recommend checking out the Command LED lights # 328-K-51 for amber and # 328-K-52 for red. These measure 3-3/4" long x 1-5/8" tall x 1/2" deep and have mounting holes that are spaced 2-1/2" apart on center. Attached are links to review videos...
view full answer... - Replacement Red Oval Clearance Light for Itasca Sunova MotorhomeIt sounds like you are just trying to replace an old oval clearance and if that's the case we have some great options. That said, the numbers on the lens of the light (SAE ###) are not part numbers and cannot be used to cross-reference. However, since you sent a photo I can pretty easily see that the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 will be the correct replacement. I have attached a full list of options below.
view full answer...
- How To Choose Correct Replacement for Command Trailer Clearance and Marker LightsYes, we do offer Command trailer clearance and marker lights. In order to choose the correct one you'll need to know the color, size, and shape of your existing. The LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 for example has a red lens, measures 3-3/4" long x 1-5/8" tall, and has an oval shape. If you need something different, you can check out our entire selection which I have linked for you below or just let me know the above and I'd be glad to select...
view full answer... - Availability Of Trailer Clearance Light That Fits In 1" Diameter HoleI have another option for you, but at this time we do not offer a clearance light that will fit a 1" diameter hole. Instead I recommend installing the LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens # 328-K-52 which will cover the hole in your trailer, and will mount directly to the frame of your trailer. I included a video of the # 328-K-52 for you to take a look at.
view full answer... - Replacement Clearance Lights for 2012 Forest River Sunseeker Class CWe do not have information that tells us specifically what lights are on your 2012 Forest River Sunseeker, so the best way to determine what's going to fit is by providing measurements or a part number off the existing lights. With that said, it looks like you may have something similar to the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens # MCL31AB. The # MCL31AB is 4" long x 2-1/16" tall x 1" deep with mounting holes 3" apart (center on...
view full answer...
- Recommendation for Replacing Glo-Brite 8511 Tail Lights on Lance Slide In CamperI looked up pictures of your 8511 Glo-Brite incandescent lights, and found that they are 9-1/4 square tail lights. The closest light we have is going to be the Jeep-Style Trailer Combination Tail Light # ST60RB. It's has the same 4 functions as your Glo-Brite light (stop, tail, turn, backup), and an additional license plate light at the bottom, for a total of 5 functions. It features the same red and clear lens, so it's going to look very similar. The # ST60RB, however, is slightly smaller,...
view full answer... - Why Does The LED Trailer Clearance or Side Marker Light # 328-K-52 Have a Drain Hole? The LED Trailer Clearance or Side Marker Light # 328-K-52 has the openings as it is not designed to be a submersible light. While is is possible for water and moisture to get inside the lens the openings also allow for the moisture to get out. The hole is on the bottom as water is going to typically run down and not up into the lens unless it is completely submersed in water. We do have submersible lights like the Optronics # MCL13R2B which is fully sealed off. This will not offer a replacement...
view full answer... - Recommended Red and Amber LED Clearance Lights For 2017 Entergra Coach Aspire MotorhomeI would be happy to help! To add clearance lights to your 2017 Entegra Coach Aspire Motorhome I recommend the Red # 328-K-52 and Amber # 328-K-51. These are two diode LED lights like you were wanting, and install by surface mounting to your motor. Based on the pictures I was able to find of your motorhome it looks like it has some oval lights, so these will blend in and not look out of place. You will need to use # 16-1-1 and heat shrink butt connectors # DW05744-10 to connect the lights...
view full answer... - Does GloLight LED Combination Trailer Tail Light STL161RLB Have Built In Side Marker Light?The GloLight LED Combination Trailer Tail Light - 5 Function - Submersible - 39 Diodes - Driver Side # STL161RLB you were looking at does not have a built in side marker light, so you would need to add a side marker light using # 328-K-52. Another option would be to use the Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side # C7493RTM and Driver Side # C7483RTM instead which do have the built in side marker lights. I included videos of the...
view full answer... - How to Install Turn Signals/Marker Lights on Side of 5th WheelWe do have an option that would work for you, but it will take a bit of finagling to make it work for you. The turn signals on a trailer are combined on the same circuit as the brake lamps, so you'll need to use a vehicle to vehicle taillight converter like # 118158 to separate out the brake lamp signals so your side mounted directional/marker lamp doesn't illuminate with the brake pedal. For lamps, I'd recommend the # ST75AB. Because the converter isn't compatible with LED lamps, you'll...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Installed by:
Cole B
Updated by:
Wilson B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
George
10/20/2023
Light still good after a year. Much brighter than original light on other side of vehicle. Will eventually replace original light.