Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
(110 reviews)
Price: $167.62
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
Item # 8-201-5UC3
Retail:$190.01
Our Price: $167.62
You Save: $22.39
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (110)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-201-5UC3
- 6 on 5-1/2 Inch
- For 5200 lbs Axles
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Hub with Integrated Drum
- 1/2 Inch Stud
- Standard
- Dexter
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb trailer axles with #42 agricultural spindles
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 6 on 5-1/2"
- Wheel bolt diameter: 1/2"
- Weight capacity: 2,600 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: LM67048 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: LM67010
- Grease seal (included): 10-10
- Inner diameter: 2.125"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-201-90 Dexter 12" Hub and Drum Assembly for 5.2K with Hardware - 6 on 5-1/2
Replaces 8-201-5UC3
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 - 8-201-5UC3
Average Customer Rating: 4.8 out of 5 stars (110 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Tim 04/18/2024
Original equipment and fit perfectly. Nothing like new brakes. E-trailer sent the items to me within a week.
by: Jennifer10/07/2023
Think I received the wrong size on first order. But seller was quick to send another version that did fit. After struggling with getting old parts off, the less time between that and putting new parts on, the greater the satisfaction of getting everything back together. But even with a couple of weeks passing, I can tell you that the new parts go back on a whole lot easier than the old parts came off! All told, it was a good company to deal with, and they do work with you to get the right parts. Its cheaper for them to get it right the first time, but they can't see what you have in front of you. That said, some of their charts of what SHOULD be the right parts, were not in my case, and I bought the trailer new and know that no one modified it. But trailer manufactures change things up sometimes, and the documentation is not good. That said, you can rely on this seller to help you when you need it.
by: Clifford05/06/2024
Can’t go wrong. These are excellent products from a good brand. New brake assemblies fit like a glove.
by: Obi-Wan-YJ08/29/2016
My home-made (not by me) trailer used trailer house axles, and the hubs were shot when I got it. Based on the spindle dimensions (thanks, eTrailer!), I determined that these 5200-lb hub/drum assemblies would fit, and they did perfectly. I've repacked many wheel bearings, so installing these was simple. They spin smoothly and seem to do their job well. The most weight I've put on these four hubs is about 5800 lbs, which was near the limit for the tires, but not a problem for the hubs. I've also driven an hour down the highway on multiple occasions, and have no complaints.
I haven't wired up my brakes yet, so I can't comment on how well the drums work.
by: Mark09/16/2023
The four Dexter hubs arrived on time without damage due to the packing technique. They fit and mounted on my Dexter trailer axles perfectly.
by: Eric 05/10/2024
Great service...
by: paul w07/01/2015
Much more rust than I expected, I may have to take one drum to a brake shop and have it turned to clean up the rust.
by: Dave T.10/02/2016
The brakes on my 2002 Komfort 24-TS trailer were completely shot. I needed to replace the drums (cheaper than having them turned). I also needed to replace the electric brake assemblies and to upgrade them from manual to automatic adjusting. I called etrailer.com a couple of times to make sure I was ordering the rights parts and the phone reps were very helpful and courteous. The parts arrived on time and in good shape. I had everything I needed to complete the job. It took me all day to do all 4 wheels but I saved myself a whopping $1,000 over having the shop do the job.
by: Jake12/19/2021
I ordered 4 drums that came with bearings,seals,lug nuts,and dust caps. the bearings all came loose with no protection. one of the drums came without the package of bearings,seal,lug nuts, and dust cap. when they sent me the replacement package it came with a different seal definitely cheap Chinese junk also no dust cap. the bearings were Chinese as well. I will never order from this company again.
Jenny N.
12/20/2021
I will have our customer service team reach out to you.
by: Shaker08/01/2019
Fit exactly as expected to replace obsolete hub requiring wheels no longer available. Have about 500 loaded miles on it. Performed as expected.
by: Steve W05/17/2017
Wanted to wait until after our most recent trip with our trailer before giving you the one year follow-up. Just pulled the trailer almost 1000 miles in the Rocky Mountains. The Nev-R-Adjust brakes & drums worked great and I felt very confident in their performance. I really appreciate not having to crawl under the trailer to adjust the brakes. All are good products and I would recommend them to all.
by: Mike C. Utah06/02/2017
So this was the final upgrade to an 18 year old travel trailer - new brake assemblies, bearings, seals and hubs. The new brakes were a great improvement after a couple of trips break in, assembly was easy (although I do recommend buying a couple extra seals, just in case they get bent on install (ask me how I know). I have never worked on axles before but as a confident diy-er I was comfortable tackling it. Great products that were perfect fit made this an easy deal.
by: DG07/30/2017
I have ordered from etrailer.com on other occasions and for the most part what keeps me coming back in the pricing. They usually have the lowest price for the same original equipment. Be careful if you haven't heard that your product has shipped in a reasonable amount of time, even if their website says they have the item in stock. They will hold your order until they have all the parts to ship. I had not seen a shipped email for almost a week and when I called they said they would have it to ship in mid august, about a month after I ordered. I was told they had a similar item in stock ready to ship now if I wanted to change my order. I appreciated that and did change my order, however, I needed to know that information at the time they knew it because I had to change my vacation plans because I could not get the parts in time to take our 5th wheel. Overall this is a good place to order parts from and I will keep doing so.
by: Robert M.03/03/2015
The hub is a quality replacement for the OE hub/drums on an 1967 Airstream. The bearings/seals that come with the kit are not quite the quality I trust, but local shops have better quality ones available. Also, I'm confused as to why it's not listed (and confirmed in sales rep replies of customer questions) for 15" wheels as it fits in the two different styles of 15" wheels we have with plenty of clearance and the neutral offset loads the bearings correctly. I'd also recommend running a thread chaser on the lugs as paint can cause nuts to jam and not seat fully and thus work lose. All in all, with a little TLC, a better replacement option than rebuilding the original hubs.
by: Dan10/24/2021
Dexter provided a new rear seal, but it was the wrong size (apparently they use two different sizes of spindles on these axles). They also neglected to include a new cotter pin. Otherwise its a great product.
Jenny N.
10/26/2021
It is possible that the spindle could use a seal that has the outer dimension of 3.376 and an inner diameter of 2.25 like part # RG06-070. A cotter pin isnt included with the hub however we do have them available like part # 3371302250.
Helpful Links
by: Alan08/22/2020
Very professional staff.had nothing left for brakes and Jesse hooked me up.everything fit perfectly.Thank you for the fast shipping too
Alan S.
8/23/2021
Perfect
by: William 05/30/2020
Recieved drum a day earlier than expected. Was a little concerned when I got it because the bottom of the box was open about 4in. Opened and everything seemed to be there. Almost exact replacement for my 97 prowler 5th wheel. Only difference was original drum had slots on sides to adjust the brakes without having to crawl under the camper. Overall it looks to be very good quality. Just pack the beaings, install grease seal, put on and adjust the brakes. Done!!!!!
by: Rick T03/16/2020
Bought these for my trailer house axles. I converted to 6 lugs. Everything was easy. I don't use the brakes as of now. But t looks like a perfect fit. When I do go to brakes ill buy the parts for that.
by: Jb03/30/2022
Same as the backing plates, these hub and drum assemblies fit just right and have been doing a good job on my 10,000 LB dump trailer for over a year now with no issues.
by: Mark m.10/17/2015
Replacing mobilehome brakes and drum. Ordered drums, brake assemblies, and mounting flanges. Hard part was the flange. The rest is easy. Very satisfied with product and service.
by: Lynn S.01/28/2020
Purchased 4 new dexter hub assy's with bearings. So far so good. No problems to report.
by: Kevin 07/30/2021
Very good quality, with straightforward installation. Only negative is the fact that the kit doesnt come with new key washer, castle nut, and cotter pin. So if using this kit make sure to save those!
by: Airstreamin06/16/2014
Exact match, installed with new backing plate ordered as well. Packaging could of been better, had 1/4" x 3" rear edge of forward shoe chipped off due to you folks placing drum onto backing plate at an angle during boxing. Have seen this error occur many times from someone not wanting to smash fingers this way with heavy hub assy. Ease to install and adjust, heed my advice to pay attention in the shipping dept to not have damage done this way again.
by: william07/26/2015
i was afraid this was going to be wrong!!, you know, ordering from the internet!!! but was an exact match!!
William
7/25/2016
great!!
by: Dan W06/24/2015
Product was exactly as described and worked perfectly as a replacement on my Ezloader trailer, shipping was very fast and employees were very knowledgeable and friendly on the phone.
25
110
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Hub and Drum Assembly with Same Configuration as Bearing Kit # BK3-300I have attached a link to all of the hubs that we offer with Bearing Kit, # BK3-300, configuration, 25580 inner bearing and LM67048 outer bearing. I have also attached a article on determining the bolt pattern of your wheels. For example, if the bolt pattern is actually 6 on 5-1/2, you could use the Trailer Hub and Drum Assembly, # 8-201-5UC3.
view full answer... - Recommended Electric Trailer Brake Assembly for 6K AxlesThe brake flange for 3 inch axle tubes is the Redline Brake Mounting Flange for 3" Round Axle # 4-44-1 which has a 5 on 3-7/8 inch bolt pattern. This is the industry standard and I don't have anything like what your mentioned with 10 holes and 8-1/4 inches apart. For the brake assemblies you mentioned which are compatible with the 5 bolt flange listed above, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465. For...
view full answer... - Replacement Trailer Axle with 65-1/2 Inch Spring Center MeasurementI do have an option for you but we currently do not have a standard trailer axle with a distance of 65-1/2" from the center of each spring seat. Instead, I recommend taking a look at the Timbren Axle-Less Trailer Suspension System part # ASR5200S01. This system will actually replace the axle and leaf sprigs with a set of rubber aeon springs that will do a much better job of absorbing road shock and support the trailer's load. This system has a 5,200 lb capacity but higher capacities are...
view full answer... - Hub With Inner Bearing 25580 and Outer Bearing LM67048We do have hubs with the # 25580 inner bearing and # LM67048 outer bearing, and they also use grease seal # 10-10, which has a 2.125" inner diameter so you will need to measure your spindle where the seal rides to ensure the hubs are compatible. These are for 5,200 lb axles and work with 15 inch wheels, but the hubs only come in 6 lugs wheel bolt pattern, the 6 on 5-1/2". The options are either an idler hub or hub and drum: - Dexter Trailer Idler Hub Assembly for 5,200-lb Axles # 8-213-5UC1 -...
view full answer... - Will Dexter Hub and Drum for 5200 Pound Axles and 6 on 5-1/2 Bolt Pattern Fit a 15 Inch WheelHub and drum assembly # 8-201-5UC3 is designed for use with 16 to 18-1/2 inch wheels but will fit a 15 inch black conventional steel wheels like # AM20514.
view full answer... - Replacement Hubs, Wheels, and Tires for Mobile Home Axle Hub ConversionThe Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 # 8-201-5UC3 is a fit for the inner and outer bearings but you will need a different grease seal. The seal you need is the Grease Seal - Double Lip - 2.250" ID - 3.376" OD # GS-2250DL which will fit the hubs. Then for your wheels, I recommend the Karrier ST225/75R15 Radial Trailer Tire with 15" White Wheel - 6 on 5-1/2 - Load Range D # AM32664 for your 4 tires.
view full answer... - Can etrailer.com Trailer Hub # AKHD-655-6-EZ-K Replace Dexter # 8-201-5UC3Yes, you can use the etrailer.com Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K in place of your existing Dexter # 8-201-5UC3. The inner and outer bearings for the two assemblies match up perfectly but you will just need to swap out the grease seal that's included with the etrailer.com hub with part # GS-2125DL. The seal that comes with this hub is slightly larger than what fits your spindle but by using the # GS-2125DL instead you will have a perfect replacement for your trailer at...
view full answer... - Availability Of Timbren Heavy-Duty Axle-Less Suspension 3500lb ASR35HDS01We sure do! You can visit the product page of the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS01 by clicking on the part number in this question. This Timbren Axle-Less Suspension is the Heavy-Duty version which means even though it has a 3500lb rating, it is made out of thicker metal than the standard version and uses 5200-7000lb hubs instead of 3500lb hubs. For hubs you can use Idler hub # 8-231-50UC1-EZ which has the 8...
view full answer... - How To Install a Timbren Axle-Less 5,200-lbs System on Aluminum Framed Travel TrailerYou can absolutely use the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 on your 2013 Livin Lite Camper with an aluminum frame, but you'll need to put some sort of buffer between the Timbren system and the frameto prevent galvanic corrosion. Your best bet is going to be putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion,...
view full answer... - How to Determine Hub and Drum Assembly & Brakes With 6 on 5-1/2 Bolt Pattern for 10,000 lb TrailerThanks for that info, and based on that I can narrow down the options for you considerably, but you will need to do a bit of measuring in order to make sure you get the right hub and drum assembly. Based on having Dexter axles and a 10,000 lb GVWR trailer it is likely you have 5,200 lb axles but also possible you have 6,000 lb axles. This means you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves;...
view full answer...
- Brake Assembly Fit and Compatibility for 5200 lb AxleThe Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies # 23-458-459 is a fit for the 5200 lb axle on your 2013 Keystone Copper Canyon Sprinter 5th Wheel. The Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA are also a fit. The ALKO hub/drum you asked about is the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 # 8-201-5UC3 and yes it is a standard size...
view full answer... - Replacement Braking Assembly for Offset Four Bolt Brake Mounting FlangeThe Dexter Electric Brake Kit part # 23-105-106-09 is the only braking assemblies we have that will work with the offset four bolt brake mounting flange. The dimensions of these assemblies are 12" diameter x 2" wide therefore yes, will work with your existing drums. Unfortunately, the offset four bolt brake mounting flange is not very common so the list of compatible parts is very limited. If you would like to replace the hub/drum instead of using you old ones then you will want to use...
view full answer... - Replacement Hubs for Dexter 5200-lbs AxleI have a solution for you, but there is not an available hub that uses those bearings and also has a 5 on 5 bolt pattern. Also, the # LM67010 you're referring to is bearing race that is found with the # LM67048 outer bearing, so you'll need a hub that takes the # 25580 inner bearing and # LM67048 outer bearing with the # LM67010 race. To replace these hubs you'll want to use the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2 # 8-213-5UC1, which come with the above mentioned...
view full answer... - Replacement 12 X 2 Electric Trailer Brake Assembly For a Dexter 5,200lb axleI recommend the etrailer Electric Trailer Brake Kit # AKEBRK-7-SA as a replacement for your Dexter 5200 axle. This kit is self adjusting and work with 14.5-16.5" wheels. The brake assembly is the 12"x2" that you need and attaches to the axles 5 bolt mounting flange. If you are also needing a hub/drum assembly the Dexter Trailer Hub and Drum Assembly # K08-201-98 or # 8-201-5UC3 may be the correct one for you. The first one is for E-Z lube axles and second for standard axles with a 6 on...
view full answer...
- How to Choose 6-on-5-1/2 Hub/Drum Assemblies and Brakes for an AxleReplacement hubs are selected based on the bearing set used in the originals. The linked picture shows you the typical location and appearance of bearing, race and seal part numbers, but if you cannot find those you can measure the spindles with a precision caliper to the nearest thousandth of an inch (1.123). The locations to measure are shown also. I included a link to our main page for all 6-on-5-1/2 bolt pattern hub/drum assemblies. These come with the appropriate bearings, races,...
view full answer...
- Replacement Hubs And Electric Brakes For Dexter axle 8-133When it comes to installing new brakes onto your Dexter 8-133 axle you will have to cut off the welded flange/brake unless the flange has a bolt pattern of 5 on 3-7/8 inches. The Brake Mounting Flange # 4-44-1 will get welded to the spindle at the end of the axle to provide a secure mounting place for The Dexter Electric Trailer Brake Kit # 23-105-106. The brakes have a 12 inch diameter and are 2 inches wide. They have an axle rating of 6,000 pounds and will fit 14-1/2 inch, 15 inch, or...
view full answer...
- What Hub & Drum Assembly Fits LM67048 Trailer BearingsThe trailer hub you referenced, # 8-174-5UC3, uses outer bearing # 15123 so it will not fit your trailer. While the outer bearing information helps, it is only one piece of the puzzle in getting you the right part. Another key piece is the inner bearing size which is stamped on the bearing, if you cannot find the bearing number, then you will need to measure to get the right bearing size. You will need a digital caliper like Item # PTW80157 to measure the spindle at the bearing seats....
view full answer... - Should Mobile Home Axles be Replaced on TrailerIf you are trying to be cautious you'll need to replace the entire axle as mobile-home axles are only intended as one-time-use axles and anything beyond that is a risk. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached...
view full answer...
- Replacement Hub and Drum for a Dexter 8-133You will need to get the other bearing number from inside your current hubs before we can pick you out replacement hubs. Most likely the outer bearing you pulled is a LM67048 and the inner you have is a 25580 which would mean that the # 8-201-5UC3 would be the correct size hub and drum for you. This hub has a bolt pattern of 6 on 5-1/2 inch and would not work with your current wheels. I attached a page that has all of the wheels and tires we offer in that bolt pattern.
view full answer... - Availability of 5-Bolt Hub/Drum That Takes Bearings 25580 and LM67048It sounds like you're looking for a replacement 5-bolt hub that takes bearings # 25580 and # LM67048. Matching the old hub's bearings to the replacement's is essential to ensure the new hub will properly fit on the spindle. We do have several hubs that take this same bearing set but they are all 6 or 8 lug types. You can see them all by clicking on the link provided. For example, part # 8-201-5UC3 is a 12 x 2-inch hub/drum with a 6-on-5-1/2 bolt pattern for 5200-lb axles that takes 16-inch...
view full answer... - Recommended Hubs and Brakes for a Timbren ASR5200S01I can definitely suggest the hubs and brakes needed for the Timbren # ASR5200S01 Axle-Less Suspension set up. I did also include a few technical diagrams for you to take a look at as well. The Dexter Hub and Drum Assembly # 8-201-5UC3 will be a good fit, but the seal that is included will need to be changed to # GS-2250DL. The seal that is included is a little too small for the spindle. This will also have a 6 on 5 1/5 bolt pattern for the wheels. The Dexter Nev-R-Adjust Brakes # 23-464-465...
view full answer...
- Are The Races Pre-Installed On the Dexter Trailer Hub and Drum Assembly for 5,200-lb AxlesYes, the races are pre-installed into the hub on the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles part # 8-201-5UC3.
view full answer... - Bearing Kit For 2018 Keystone Sprinter Campfire 29BH With 5,200 lb Dexter AxleWe do indeed have the correct bearing kit for your 2018 Keystone Sprinter Campfire 29BH, which does have 5,200 lb Dexter axles. The correct kit, which includes the bearings, races, and grease seal, is the following: - Bearing Kit # BK3-110 The # BK3-110 is a kit for one hub, so you would need one kit per hub.
view full answer... - What is Minimum Pilot Hole Diameter Required for Trailer Wheel with Hub 8-213-5UC1The minimum pilot hole diameter you would need on a rim for it to be compatible with the Hub assembly part # 8-213-5UC1 that you referenced would be 3.65 inches. I went out into our warehouse to confirm this. This would be the same for the # 8-201-5UC3.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Installed by:
Kevin C
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dave T.
10/2/2017
Fantastic!