bing tracking image
  1. Accessories and Parts
  2. ABS Fasteners
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Hydraulic Drum Brakes
  6. Hardware
Mounting Bolts and Hardware for 12" Brake Assemblies
ABS Fasteners

Mounting Bolts and Hardware for 12" Brake Assemblies

Part Number: BRKH12
In Stock
$36.10
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. 1-800-940-8924 to order ABS Fasteners accessories and parts part number BRKH12 or order online at etrailer.com. Free expert support on all ABS Fasteners products. Great prices and Fastest Shipping for Mounting Bolts and Hardware for 12" Brake Assemblies. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (199)
  • Q & A (0)
  • Videos (1)
  • Photos

ABS Fasteners Accessories and Parts - BRKH12

  • Trailer Brakes
  • Electric Drum Brakes
  • Hydraulic Drum Brakes
  • Hardware
  • ABS Fasteners
  • Bolts
  • 12 Inch

Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.


Features:

  • Allows you to install 2 trailer brake assemblies
    • Fits 12" brake assemblies without pre-installed mounting bolts
    • Works with electric or hydraulic brakes
  • Includes:
    • 10 Mounting bolts
    • 10 Nuts
    • 10 Lockwashers


38LW Lockwasher for Brake Mounting Bolt for 12" Brake Assemblies

191000 (7-5) Redline Brake Mounting Bolt

38N Redline 3/8"-24 Nut





Video of Mounting Bolts and Hardware for 12" Brake Assemblies

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for The Low-Down on the Mounting Bolts and Hardware for 12" Brake Assemblies

Today we're going to take a look at the mounting bolts and the hardware for 12 inch brake assemblies. Now this hardware will allow you to install two trailer brake assemblies to the five bolt brake mounting flange on your trailer axle. This hardware is designed to fit 12 inch brake assemblies that do not have the pre-installed mounting bolts. It will work with either electric or hydraulic brakes. It includes everything laid out here on the table. It includes 10 of the one and a quarter inch long by three eighths inch diameter mounting bolts. and the head size on that is a nine sixteenth. Heres a nine sixteenth socket, you can see it fits perfectly.

Also comes with 10 of the three eighths inch by 24 size nuts, and they are the same size, nine sixteenth, and also the 10 lock washers. But that should do it for the review on the mounting bolts and the hardware for 12 inch brake assemblies.

Customer Satisfaction Score:


Customer Reviews

Mounting Bolts and Hardware for 12" Brake Assemblies - BRKH12

Average Customer Rating:  4.8 out of 5 stars   (199 Customer Reviews)

Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.

by:

Great fit and quality for my 38 year old trailer I built with my Grandfather from the ground up.



by:

I needed to upgrade my boat trailer from free-wheeling spindles to electric brakes because my new tow vehicle has a 5,000 pound tow rating only if the trailer has brakes. I chose the Dacromet coated brakes assemblies, this mounting bolt kit and the galvanized hub and drum kit. This mounting bolt kit seems to be excellent quality hardware that fit perfectly. I torqued to 35 lb-ft.

David S. profile picture

David S.

2/19/2022

After one year these bolts are tight and free of any rust or corrosion.



by:

Hardware was OK but I reused my original hardware because it was in good condition and I prefer the captive star washer nut to the separate nut and split washer.



by:

Glad I purchased these when installing the new brakes, old nuts and bolts were corroded made the installation easier and added assurance of new hardware

Lewis profile picture

Lewis

6/8/2021

Continues to work as before



by:

In my opinion, lock nuts would be better. That is why I give only four stars. Regardless, the bolts, washer, and nuts were in new condition and none were missing. No threading problems or torque problems.



by:

Paid for this but the hardware was included with the other components.
Not a big deal just not needed..

Katrina D. profile picture
Etrailer Expert

Katrina D.

7/20/2023

Let me get your information over to our customer service department for them to further assist you.



by:

I’m putting them in now and they seem to be working well??



by:

I ordered 4 non-self adjusting brake sets and recieved 2 self adjusting right sides and 2 non-self adjusting left sides. I needed the project to be complete and I installed them. When i tok the out of the boxs, there was some rebuilding as things were out of alignment from shipping. Initial adjustments on both sets was a little more time consuming because of the lack of large adjustments, but once set they are great. The electrical hook ups were easy. They stop my 5000+lb camp trailer just fine. Finally, hardware being purchased separately is annoying. They should be packaged together and the hardware should be free with purchase of the brake sets.



by:

I purchased these brake assemblies to replace the old electric brakes on one axle of my 1963 vintage twin axle trailer. Best thing I ever did. The electric brakes were relatively simple to install and have been working extremely well. These new brake assembles have logged more than 8,000 since they were installed and have worked well with the brake controller and break-away cable system I also installed. I am very happy with this product.



by:

Nice job "e-Trailer"; received this "heavy" order very promptly; did not expect it so quickly in view of how other retailers/ manufacturers/ on-line businesses are behind in fulfilling orders. Packages (3) came all intact, well packed and product received in great condition. The order included:
> 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles (2)
> U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts (2)
> Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers (2)
> Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 6K (2)
> Mounting Bolts and Hardware for 12" Brake Assemblies (2)
> Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair) (2)
> Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal (4)
> Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side.
These items are being utilized in the total suspension replacement of a 10,000 gvwr tandem axle trailer. Good sized job for a DIY'er. I expect that it will give my JD 2038 tractor a smooth and safe ride as it is towed/ hauled down the highway.
Thank you.
I would/will strongly recommend to a friend/relative or associate.
( I'd take a picture of the "project", but there is a vicious rain storm occurring outside; perhaps one or two pics to follow at a later time).



by:

When you replace everything from the axle spindle out, why would you not replace the brake assembly mounting plate bolts? The quality was good and we felt confident that the correct grade of bolt was used. Price was minimal when compared with the possibility of bolt failure if the old bolts or hardware/farm store bolts were used.



by:

Just one of the many satisfied customers with the company etrailer. I have used this on line site to refurbish my used boat trailers over the last 10 + years. During this pandemic I sort of let my trailer sit around and just wait until the end is near to react and make the trailer road worthy. After 3 years in out of salt water (mostly in) you might get this. After acquiring new brakes and drums from etrailer it’s back to the salt water again. Thanks for the essential workers at etrailer George, Savanna, and Carol. Cheers



by:

I rebuilt an old boat trailer that has been sitting outside for 10 years. It was in really bad shape & I could not read any of the bearing numbers, all had had was the dimension of the hub & the old bearings. Stacey A. at etrailer was very helpful in getting the right parts I needed & best of all when I got my parts they all fit. The brake kit was great just bolt them on. Very quick shipping & great service.

Thanks



by:

Direct replacement!



by:

Worked as they should.



by:

Excellent quality fasteners for the price. Bought thsesin case I needed to replace the entire brake assembly on my car hauler trailer. Did not have to replace them but will keep these for other projects that may com along. Will definitely order from etrailer when I need other items.



by:

I never received the bolts



by:

nice complete set of backing plate fasteners.
saved
me from pc mealing something together from the hardware store.



by:

Ordered everything I needed on a Sunday and even spoke with a person. Quick shipping to boot..



by:

very poor packaging parts were damaged and missing, everything was just thrown into a large box nothing was individually wrapped on the inside. I don't know why I use this company this is not the first time this has happened

Jenny N. profile picture
Etrailer Expert

Jenny N.

9/15/2022

I apologize that the package arrived this way and I will let our shipping department know. Our customer service will reach out to assist you.



by:

Got these just in case the old hardware off my brakes were froze up. I ended up only having to cut two of the bolts off of the four brakes I replaced and didn't need all these. Still they fit fine and did save me time from having be run to the store. Also they were easier getting started than the old hardware would have been.



by:

Product packages packed very well and delivered on time



by:

Turns out my hub has integrated bolts, but it was nice to get shiny new washers and nuts in place of the rusty crude that was in there.



by:

Brakes are on and looking/ working great. A much improved self adjust system than was the OEM brakes.
I could see the quality right off. Now no worries for another ten thousand miles. Thanks for your help etrailer

William J. profile picture

William J.

9/30/2018

Still going strong....



by:

I was initially concerned about finding the right parts as the trailer was fairly old. etrailer had just what I needed. The website is so elegant. I was able to find the right parts quickly and with comparative options to make a final selection. The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected. I highly recommend etrailer for any of your trailer needs.


25
199
Show More Reviews

See what our Experts say about this ABS Fasteners Accessories and Parts

  • Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
    The difference really comes down to brand recognition, price, and warranty, but apart from that they are very similar. Dexter is a leading brand and people know they are getting quality, hence the higher price. They Dexter also do have a 5-year warranty compare to the etrailer brand's 1-year warranty. Going with the etrailer brand doesn't mean you're getting a bad set of brakes though; in fact, with thousands of customer reviews on both sets, each is rated very close to 5 stars. Really...
    view full answer...
  • Replacement Bearings, Hub, and Brakes for Lippert 4,400 lb Axle
    Hi David; your 4,400 lb Lippert axle actually has a 5,200 lb spindle it just has a lower rating. This is good news since 4,400 lb axles are obsolete and parts aren't always available. The outer bearing is the # LM67048 and inner bearing is # 25580 with a # GS-2250DL (10-36) grease seal. For a hub and drum assembly you can use the # AKHD-655-6-EZ-K. This is pre-greased with a 6 on 5-1/2 bolt pattern and includes the bearings and grease seal. If you happen to look at the outer bearing for...
    view full answer...
  • Self-Adjusting Electric Brakes For 2022 Grand Design Momentum 350G With 7k Axles
    Hey Don, The 17-1/2" wheel listing is just a guideline for hub size, because wheels that are too big have a hard time mounting to some hubs due to the lack of surface area. So it won't affect the fit of brakes, and because you have the 7k Dexter hub and drum on your 2022 Grand Design Momentum 350G, here's what you'll need: - Electric Trailer Brakes - Self-Adjusting # AKEBRK-7-SA - Mounting Bolts and Hardware # BRKH12 These brakes have an E-coating on the backing plates, and the hardware...
    view full answer...
  • Bolts And Nuts Needed To Mount 12" Brake Assemblies
    Hey Mason, To mount your 12" electric brake assemblies you would need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
    view full answer...
  • Hub & Drum And Dexter Electric Brakes For 2014 Heartland Gateway 3200RS 5th Wheel Trailer
    Yes, we can get your 2014 Heartland Gateway 3200RS 5th wheel trailer set up with the Dexter hub and drum and electric brakes. What you'll need is the following, and you can choose from either manually adjusting brakes or self-adjusting brakes: - Dexter Trailer Hub and Drum Assembly # 8-219-4UC3 - Manual Adjust Brakes: Dexter Electric Trailer Brake Kit # 23-180-181 or - Self-Adjust Brakes: Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 The hub and drum comes with the bearings,...
    view full answer...
  • Is Electric Trailer Brake Kit For 7k Axles as Good as Dexter
    Yes, you will get the same performance and quality out of the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 and Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. The biggest difference is simply you get the latter for a much better price. Otherwise, both do require Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
    view full answer...
  • Replacement Hub & Drum And Electric Brakes For 2019 Keystone Cougar 315RLS
    Thanks for all that info, that was awesome. And for your 2019 Keystone Cougar 315RLS with a 5,200 lb axle, hub with 6 on 5-1/2" bolt pattern, and Nev-R-Adjust electric brakes, here is exactly what you need: - Dexter Trailer Hub and Drum Assembly # K08-201-98 - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 - Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
    view full answer...
  • Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
    To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit # TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit # AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting Hardware Kit # BRKH12 to complete your installation. According to my research the Fayette Dayton axles are older and some obsolete so I also recommend comparing the brake mounting flange bolt pattern in the attached photo for our brake assemblies to...
    view full answer...
    Image 1 for
  • Recommended Self Adjusting Brakes for a 6,000 lbs Axle
    You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item # 23-458-459. If you need new mounting bolts and hardware item # BRKH12 will get you set up.
    view full answer...
  • Replacement Brakes for Lippert V000417876 5,100 lb Axle
    Hi Steven; the etrailer Electric Trailer Brakes - Self-Adjusting # AKEBRK-7-SA you looked at are the correct replacement for your axle. This uses 12" x 2" brake assemblies that fit a 5 bolt brake flange. If you need replacement mounting hardware you can use the # BRKH12.
    view full answer...
  • Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
    Hello Brian, we do offer some parts that will work for your application and will be very similar to the BPH1206EPR kit that you mentioned. Like you said, the 12 x 2-1/2 drums are pretty uncommon, so I would have to recommend going instead with the standard 12 x 2 drums which will be readily available. Take a look at the parts below. Aside from the drum depth specs will be identical. Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased # 8-201-9UC3-EZ Dexter...
    view full answer...
  • Replacement Brakes For Grand Design Reflection With 5,100 lb Axle
    Your Grand Design Reflection with 5,100 lb axles uses the same 12 inch brakes that are for 5,200 lb axles, so what you need are the following: - Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-7-SA For installation you'll just need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
    view full answer...
  • How to Determine Correct Electric Brakes for Boat Trailer
    I can tell you how to determine the correct electric brakes for your boat trailer, though we don't have a way of knowing precisely what a 2006 Karavan boat trailer needs. It's pretty simple to figure out though, as you need to know your axle's weight capacity, your brake's mounting flange bolt pattern and the inside diameter and depth of your drum. You mentioned 12 inch diameter, so for example, the Electric Trailer Brake Kit # AKEBRK-7-SA are for 5,200 lb to 7,000 lb axles, measure 12"...
    view full answer...
  • Replacement Hub for #42 Spindle on Homemade Trailer
    Although we do have hubs that will fit your #42 spindle, nobody makes one with a 5 on 4-1/2 or 4 on 4 bolt pattern. The only option would be to use something like the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. This hub and drum assembly has a 6 on 5-1/2 bolt pattern and is designed for 5,200 lb and 6,000 lb axles. If you need brakes as well then you could use the # AKEBRK-6 along with the # BRKH12 mounting hardware. If you only need an idler hub the # AKIHUB-655-6-EZ-K...
    view full answer...
  • Electric Brakes & Bearings For 6x12 Mission Dump Trailer
    While the serial number isn't something that we can use, I did take a look at some specs of your 6x12 Mission Dump trailer, and per that you have 5,200 lb axles and hub and drums. I highly recommend verifying that, and if that is indeed what you have, the correct bearing kits and electric brakes are the following: - Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies # AKEBRK-7-SA - Bearing Kit # BK3-300 The only other thing you will need is the mounting...
    view full answer...
  • Torque For 12" Trailer Brakes & 3" U-Bolts
    Hello Paul, We do not offer splined bolts for brake mounting hardware, just the bolts with the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12. The torque for 12" assemblies should be 30-50 ft/lbs, and the torque for 3" u-bolts like with the U-Bolt Kit # APUBR-8 is 40-70 ft/lbs.
    view full answer...
  • Recommended Replacement Electric Trailer Brakes for 7,000 lb Axles
    For electric trailer brakes on a 7,000 lb axle, I recommend going with a self-adjusting kit because they are going to be simpler to maintain; you won't have to manually adjust them as they will always be aligned properly. The kit I recommend is the following: - Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies # AKEBRK-7-SA I really like these brakes because they are easily the best value for electric brakes, combining quality and effectiveness at a better...
    view full answer...
  • Can I Use Self Adjusting Brakes in Place of Manually Adjusting Brakes on my 5th Wheel
    Yes, you can replace your old manually adjusting brakes with a set of self adjusting brakes without any issues. You'll want to determine the size of the drums on your trailer axles, which can usually be easily determine by your axle capacity. If you've got 10 inch drums and tandem/triple 3500-lbs axles then you'll want to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies do not come with mounting hardware...
    view full answer...
  • Do Electric Trailer Brakes With Parking Brake for 6k Axle Work on 7k Axle
    So long as you have a standard 5-bolt mounting flange on the axle such as the Brake Mounting Flange for 3" Round Axle # 4-44-1 you can use the 6,000 lb Dexter Electric Trailer Brake Kit with Parking Brakes # 23-112-113. You will also need to have a 12" diameter x 2" wide drum for the brakes to fit in, and if you have those things, you can use these 6k brakes. You will also need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12. As for the price, that really depends on...
    view full answer...
  • Determining Correct 12"x2" Trailer Hubs Compatible With 12"x2" Hydraulic Brakes
    The Hydraulic Brake - Uni-Servo - Free Backing - Dacromet - 12" Left # AKFBBRK-7L-D and Right # AKFBBRK-7R-D you were looking at do not include the drum. To mount these brakes to your trailer you will also need Mounting Hardware # BRKH12 These brakes require a 12"x2" hub, but to determine the correct hub for your trailer you will need to know which inner and outer bearings your spindles use, and the bolt pattern of your current hubs. The easiest way to accomplish this is by removing one...
    view full answer...
    Image 1 for Image 2 for
  • Hub and Drum Compatibility For Timbren Axle-less Suspension 5200-lbs
    If you're going to use the Timbren Axle-less Suspension System 5200-lbs with brake flanges installed, like the 2" lift model # TASR5200S05 or 4" lift # TASR5200S03 , those are compatible with the Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K since they have compatible inner/outer bearings, races and grease seals. However, the # AKHD-655-6-EZ-K are not compatible with the Timbren Axle-less Suspension # ASR5200S01 because the...
    view full answer...
  • Torque For Installation of Dexter Electric Trailer Brake Kit 23-180-181
    According to Dexter, the torque should be between 25-50 ft. lbs. when installing the # 23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
    view full answer...
  • Replacement Self Adjusting Electric Trailer Brakes for 7,000 Pound Axles
    The Dexter brakes you're looking for are part # 23-464-465. These are self adjusting brake assemblies for 7,000 pound axles. Both the left and right hand sides are included and labeled to make the installation easier. The brakes fit brake flanges with a 5-bolt pattern and you can use part # BRKH12 for the hardware. The prices for everything we sell can be found on the product pages. For a much more cost efficient option we have our own etrailer.com branded brakes. Part # AKEBRK-7-SA...
    view full answer...
  • How to Determine Hub and Drum Assembly & Brakes With 6 on 5-1/2 Bolt Pattern for 10,000 lb Trailer
    Thanks for that info, and based on that I can narrow down the options for you considerably, but you will need to do a bit of measuring in order to make sure you get the right hub and drum assembly. Based on having Dexter axles and a 10,000 lb GVWR trailer it is likely you have 5,200 lb axles but also possible you have 6,000 lb axles. This means you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves;...
    view full answer...
    Image 1 for


< Previous
123. . .11



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924