Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Trailer Hub Grease Seals
| 2.250 | 3.376 | E-Z Lube End Units |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to show you grease seals from Truryde, part number RG06-070. With this part number you get one pair of seals. It has an inside dimension of 2.250" and an outside diameter of 3.376". This seal is typically used in applications where you have an easy lube axle and you can also use it on normal axles as well. It has two seals to help keep out water and road grime. When you replace your seal you want to verify you have the right side so you can go by outside, inside dimensions but also look for a number that's on the seal.
In this case, our new it's easy to see, you have the GS-2250DL a lot of times this number will also be printed on the rubber edge as well. You can use these numbers to cross reference to find an exact seal. A couple tips on removing the old seal first before we can install the new seal is that you want to go ahead and just catch an edge right here. You can use a chisel like this and tap it in behind it and pop it out that way, a little bit less desirable but still works is an old screwdriver you don't want anymore, you can beat it up, pop it up like that as well. When you remove the old seal and you use a screwdriver or a chisel, make sure that you only go partway down and try to work it out from there, it is possible you can go through the seal and actually start hammering on the bearing underneath and then you may have to go ahead and replace the bearing at that point. If you can secure a hub, maybe put it in a bench vice, you can actually get ahold of the edge of the seal with a pry bar and using wood blocks, your fulcrum 00:01:35 and pop it up that way. This is not going to come up as easy as I have here of course because mine's been started already, but that'll give you an idea of how to pop it out.
The key to making this work is having to make sure you have your hub secured first. To install the new seal, pretty simple, you just drive it in until it's flush but there is a couple things you want to look out for. The ideal tool is a driver that basically is a completely flat metal surface that you can hammer into place and that's the best way to do it because what you want to do is make sure it fits flush in there. You don't want it oscillating on the spindle otherwise that kind of makes it wear out a little bit faster. If you're on the side of the road or if this is a one off deal, you can also get away with a wood block. Make sure your surface that you use is completely flat and what you want to end up is your seal flush with the hub.
You don't have to drive it fully, it just has to be flush with this edge. With that inaudible 00:02:32 grease seals from Truryde, part number RG06-070.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
It's hard to get out the original seals without damaging them. Buying the 2 pack seal is great deal
Extremely fast shipping
Item was shipped really fast and it was exactly what I ordered
Well….i ordered 6 GS-2250DL bearing seals for my TT. Unfortunately, etrailer sent 2 of 6 correctly; ordered 2-spares in case I screwed up the seal during replacement. The other 4 were incorrect size (GS-2125DL). Plus, USPS delivered 1-day late as well. etrailer customer service was very apologetic and will expedite 4-replacement seals….hopefully the correct ones this time. This caused me a delay repacking all 4-wheels. Very frustrating why a quality check did not find this shipping error.
Seals were wrong seals and once I was doing service work, had to stop and go to a local company to get the correct seals.
Thank you for the quick shipping. These seals are perfect for our 2020 39FKTH,7000 pound independent suspension with Kodiak disk brakes hubs.
I am a full time traveler in my fifth wheel so I pack my bearings every year. I don’t know the brand of these seals but they have never failed me and the quality looks good. Price is less than half the name brand.
Perfect fit and working great after a few long trips
Worked great. Was as described. Great aftermarket replacement for originals at a fraction of the price.
As always with etrailer, service is outstanding. I wish two things: 1) More companies would follow in their service and support practices. 2) etrailer would entertain the idea of partnering with us (Our Miles of Memories) YouTube channel. :)
The seals fit as described they seem to be quality, shipping was fast!
I wanted to thank you for the quick response in getting my order out. All the reviews I have rad about the company are even better.
Etrailer definitely knows what customer service means. From start to finish I was informed where my order was in the process.
Excellent work!!
So far so good. The seals I replaced were the same type from E-Traieler and they did a good job holding the grease in and the moisture out. The price was ok although it has increased and the quality seams to be as good even though I can tell it is a different manufacturer.
Easy to order, great customer service to get the correct product.
fast shippment
Excellent fit/function. 2024 Brinkley z 2900.
Fit and finish were as expected. Easy ordering, quick deliver. Once again etrailer for the win!
Overall, a good trailer, except for some of the trim began falling off inside.
The right fit for my Dexter axles. Good price and fast shipping.
The brakes and seals were shipped out quickly. Unfortunately the package had been damaged on arrival and one of the brakes was missing pieces. A replacement was sent very quickly by etrailer!
Mike L.
3/24/2026
Good deal, Mark! I'm glad to hear you were taken care of!
I think e-trailer is awesome. I always check with them prior to making purchases for my fifth wheel. I was looking for grease shields and used the "Life Chat" and connected with Ryan. Ryan was very helpful and steered me to am excellent product for a much better price. I am very happy with e-trailer and the staff I've had the pleasure to work with.
Even though Airstream no longer sourced replacement brake parts for my 2003 Airstream trailer, eTrailer had exact replacement brakes, drum/hubs, bearings and seals. Installation of the new parts was easy and quick.
Seals worked perfectly on my MorRyde independent suspension axles.
Hard to give a review other than they fit like they are supposed to in the rear bore of the hub and they are a very fair price. You won't know if they are good or not until you put many miles on them and pull your hubs to see if they prevented the grease in your hubs from migrating onto your brake components.
Pulled/cleaned/repacked/remounted 4 wheels.
Parts arrived exactly as ordered. Seals fit perfectly. Thank you.
I will continue to order from etrailer for all my DIY fifth wheel projects.
Owner 2020 Montana 3761FL
Gwendolyn Y.
4/7/2025
That's one sweet camper you got, Mark! Where are you headed to this season?
Mark
4/6/2026
Trailer pullsrolls perfectly.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Snow
6/29/2026
as described