Replacement Hubs And Electric Brakes For Dexter axle 8-133
Updated 10/03/2022 | Published 09/30/2022
Products Featured in This Question
Question:
I read your suggestions for new hubs and brakes assemblies for the Dexter 8-133 axle but dont understand how to mount. My Dexter 8-133 axle does not have a mounting flange - looks to me like the brake back plate is welded to the axle OD. Cutting this off and welding something off is significant work. Any suggestions on how to resolve?
asked by: Craig K
Helpful Expert Reply:
When it comes to installing new brakes onto your Dexter 8-133 axle you will have to cut off the welded flange/brake unless the flange has a bolt pattern of 5 on 3-7/8 inches. The Brake Mounting Flange # 4-44-1 will get welded to the spindle at the end of the axle to provide a secure mounting place for The Dexter Electric Trailer Brake Kit # 23-105-106.
The brakes have a 12 inch diameter and are 2 inches wide. They have an axle rating of 6,000 pounds and will fit 14-1/2 inch, 15 inch, or 16 inch wheels. The Mounting Bolts # BRKH12 are sold separately if needed.
Per Dexter the Dexter 8-133 axle has an Inner Bearing # 25580 and an Outer Bearing # 15123 so you will need The Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ.
This hub and drum will fit 5,200 pound and 6,000 pound E-Z lube trailer axles. It has a 6 on 5-1/2 inch bolt pattern and has a sturdy iron construction. The Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included.
I attached a few review video links below.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Grease Seal GS-2125DL - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K to 7K Axles - Qty 1
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Replacement Trailer Wheel Bearing - 15123 - Qty 1
- Q&A: Replacement Parts for Dexter Motorhome Axle 8-133
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Q&A: Is it Okay for Inner Race to Spin Inside Hub or Should it Remain Still
- Shop: Grease Seal GS-2250DL - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Timken 440972 Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K-7K Axles
- Search Results: bearing 15123 trailer bearings races seals caps
- Search Results: lm67048
- Search Results: 2125 inch id trailer bearings races seals caps
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Q&A: Replacement Hub Solution for Dexter 8-133
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer hitch
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Search Results: trailer wiring
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Shop: Base Plate for Tow Bar
- Q&A: Victron Smart Dongle vs Cerbo GX Explained for MultiPlus-II Remote Control