Replacement Trailer Axle with 65-1/2 Inch Spring Center Measurement
Updated 06/04/2018 | Published 05/30/2018 >
Products Featured in This Question
Question:
So from center to center of the spring is 65.5inch but can not find a replacement axle. Its on a 1994 terry travel trailer. 27x. 4inch axle. Where is the best place to look?
asked by: Colton
Expert Reply:
I do have an option for you but we currently do not have a standard trailer axle with a distance of 65-1/2" from the center of each spring seat. Instead, I recommend taking a look at the Timbren Axle-Less Trailer Suspension System part # ASR5200S01. This system will actually replace the axle and leaf sprigs with a set of rubber aeon springs that will do a much better job of absorbing road shock and support the trailer's load. This system has a 5,200 lb capacity but higher capacities are available if needed.
If you have brakes then you can use part # 23-325 for the right hand backing plate, part # 23-324 for the left hand backing plate, and part # 8-201-5UC3 for the drums if you have wheels with a 6 on 5-1/2" bolt pattern. I have attached a review video of this system for you as well.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: bearing buddy cap
- Search Results: l44649
- Search Results: 25580
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
- Search Results: spindle arm
- Search Results: spindle
- Search Results: straight spindle
- Search Results: l68149
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Bearing Buddy Bras - Model 19B - Qty 2
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: 2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Ram Removable, 6" Poly Caster Assembly for 2" Jack Tube - 1,200 lbs
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Video: The Low-Down on the Curt Universal Fifth Wheel Base Rails with Installation Kit
- Q&A: Rail Kit to Match Curt Spyder Adapter on 2013 Ford F-350 with OEM Puck System
- Video: Installing the B&W Custom Installation Kit with Base Rails in a 2020 Ford F-250 Super Duty
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Q&A: How to Determine Hub and Spindle Size
- Q&A: Upgrading from a 3,500 Lb to a 5,200 Lb Axle On a Trailer with 80-1/2 Inch Hub Face Length
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Q&A: How To Convert Mobile Home Hub To Common Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps


