Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
(481 reviews)
Price: $95.02
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
Item # AKHD-545-35-K
Our Price: $95.02
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (481)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-545-35-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Standard
- 1/2 Inch Stud
- etrailer
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 3,500-lb axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 10-15/16" diameter x 2-11/16" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 4-1/2"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.988"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-545-19 AxleTek 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Pre Greased
Compare to Dexter 84546UC3
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased - AKHD-545-35-K
Average Customer Rating: 4.8 out of 5 stars (481 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: Calvin05/15/2024
Was not padded well for shipping, collar had broken through box top and plastic cap was smashed, looks like shipper covered the hole in the box with packing tape. Drum seemed to be OK and fit fine.
by: Ryan V.05/05/2024
Purchased these to replace the Dexter drums on my Coleman pop up camper. The hubs had plenty of grease and the bearings already in place. I just had to reinstall the existing flat washer, castle nut, and pin. It shipped with two different dust caps. I used the one with the easy grease cap. Overall very happy with the product.
by: Dean Birch10/05/2023
Coming home from a fishn trip I stop at a store to get a snack. I looked at the wheels on my boat trailer and see one poaking out futher than the other and the work begins. We take the wheel off and tie up the axle for the trip home. I needed a new hub. Wish I had caught it sooner. So the next day I take what was left off and call etrailer. They helped me to get the right hub. Then I decide to check all the bearings on both boats, glad I did. On the pontoon I find out the drum assembly bearins was really bad. After removing it I figured it would be easier just to replace the whole thing, especially when I looked at the prices at etrailer. If I had kept the old drum I would have had to had it turned and smoothed out and then replace bearings and those hard to change out bearing holders. The folks at etrailer worked with me to get the right one for my trailer and when I got it (shipping was fast) all I had to do was add grease and slip it on. So far so good and I fish a lot. I do have 2 boats and both of my boats have bearings and hubs from etrailer. I guess I keep going back because it is easy to call and talk to a person, that can help me in what I need and get the right part the first time. In this area they were doing road work and had the roads really messed up for awhile. The rough roads worked on those older bearings, now that they are fixed maybe I won't need to change them out as often, so far so good. PS- But if I do I know where to go, even got a few extra's laying around. :-)
by: Dean06/13/2024
Product seems fine but delivery was all messed up. Half of my order came on Wednesday with the second half to be delivered later that same day. Now the second half is not going to be delivered until Tuesday of next week! Etrailer rep said they could not do anything since it was shipped UPS and that I should contact them. Tried calling UPS but no way to talk to a live person. VERY poor and frustrating delivery experience! I now have no choice but to wait an additional 6 days.
by: Rick02/29/2020
Great quality they have all the parts you need. Delivery was earlier than expected. Will be using the brake kit for boat trailer. Replace old out dated hydraulic brakes.
Rick
3/2/2021
All working great
by: Roger08/17/2018
Added brakes to my 17 ft. Trailer. Brakes went on perfectly and these drums matched with no problems. Once again quick delivery and no issues.
Roger H.
8/17/2019
Great, this trailer has been to Idaho twice and getting ready to go again. No issues and working perfect
by: Reason06/15/2023
Overall the hubs look good quality. I was disappointed by the shipping as three of the four I ordered boxes were ripped from shipping. This caused some scuff marks on the face of the hub and the outside bearing plug to be destroyed.
by: Tim 06/04/2024
The fit was good they work great e trailers has great products
by: Doyle 08/24/2022
Perfect fit. Bearings prepacked with grease. Arrived a day early.
Doyle
8/25/2023
Excellent still. It was literally plug and play. I lube my hub every 5000 miles or so. Working perfectly, smooth ride and most of all I feel safe with this product on my trailer.
by: Tom03/19/2022
The hub and drum assembly came with inner and outer bearing pre-installed ( as per my request) from Alex at etrailer. All the parts needed to assemle were there and made installation easy.
by: Robin 12/21/2023
It was a pleasure as always shopping at etrailer. It was easy to learn how to measure the bolt pattern with the given instructions via your website. There was a wide variety of in stock selections to choose from and the price was very reasonable. The easy access grease cap was bonus
by: Keith07/30/2017
Item arrived quickly and intact. Installation of the brakes and drums took a couple of hours and were very easy. Brakes and drums worked very well. I may change the other axle drums next. Thanks.
Keith
7/31/2018
I loved the way the new parts helped my trailer tow. It was smoother and more secure. I have now sold this trailer but when I need new equipment I will seek the same parts
by: Stew D09/28/2016
Order arrived in time and the install went well. The trailer brakes work great.
Thanks to Etrailer for supplying everything beeded for another successful project.
by: Brian F05/09/2024
great kit, I would highly recommend this if you needed everything here!
bolt on and go!
by: Jeffrey 05/22/2024
Easy order, fast delivery, and works we ll.
by: Asher11/03/2023
Great customer service. I made a mistake on my order. Called customer service and they made it very easy to get the product I needed and return the product I had accidentally purchased. Thanks etrailer
by: Juan 01/09/2024
Fast delivery and now the trailer has good brakes.
by: Michael 05/09/2024
Great Pruduct. Exactly as described.
by: Johnny11/17/2023
Eric always gets the right parts I need. This Trailer Hub Drum fit perfectly and was much cheaper than the name brand. I am totally satisfied with this product.
by: Richard08/03/2016
I ordered these hubs/drums as a pair, they included the bearings, races, seals, lug nuts and dust caps. They had a painted coating on the outside to prevent corrosion and they bolted right up. I would recommend.
by: Eazy Money Racing06/24/2016
Our racing season almost came to a quick halt when my Haulmark trailer had a bearing explode, taking out the hub. I found e-trailer by accident and ordered a complete hub and bearing kit. The price was amazing, the quality was amazing and to top it off the company upgraded the shipping and I had it in two days! I am impressed with not only the quality but all the information on the website to include the videos and tech tips. Because of the experience, I have decided to add new bearings and hubs all the way around. Well done!! Off to the drags that I did not think we would be attending this weekend!
Phil Landram
Eazy Money Racing
BB/FC 3606
by: James04/29/2023
When I purchased the hub and drum assembly for our travel trailer, they appeared good. Installed them and headed out for 3 week adventure brakes were marginal, and headed home with almost no brakes. This spring disassembled the brakes and found grease everywhere on all 4 hubs. Found bearings were over packed from the factory. Removed approx. 2 cups of grease and verified bearings were correctly packed. Checked grease seals for failure, they were fine. I would use caution with these pre grease units like mine being overly greased. Called e-trailer and informed them of problem and they had no other reports of problems, they seemed disinterest in my concerns. This resulted in needing to entirely disassemble brakes and thoroughly clean entire assembly. Brakes now are working as they should.
by: Fred10/23/2023
Excellent parts service and customer service. These folks are friendly, professional and knowledgeable. Received the parts and discovered one of the parts was damaged in shipping. Contacted them and Neil was on it immediately. The part is on the way. I will always buy from this company.
by: Ted 08/04/2023
Thank you for making the process of doing the brakes on my trailer and easy one. Now I have the peace of mind knowing that I have a great brake system to keep me and my family safe while traveling.
by: CP10/09/2023
literally plug and play; product fits great. quick shipping and helpful customer service. but please include the cotter pin, especially since lugs are in the kit. it makes no sense to omit a 10 cent part and make your customers have to go out to a store to find one. would buy again.
25
481
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 HubsBased on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you have the hub number I can still give you the info you need for new drums and brakes. Your current Dexter hub 8-147 I was able to look up and it has an inner bearing # LM48548, an outer bearing # L44649, and a grease seal # 58846. Based on this information...
view full answer...
- Adding Hubs and Electric Brakes to Little Guy TrailerThe first thing I recommend doing is making sure that the axle on your Little Guy trailer is equipped with mounting flanges for brakes. If not, these will needed to be welded in place by a qualified welder. Otherwise you will need to replace the axle with a properly rated unit that already has the brake flanges welded in place. I then recommend confirming that the etrailer.com Trailer Hub and Drum Assembly # AKHD-545-35-K you referenced is compatible with the spindles on your Little Guy...
view full answer...
- Electric Trailer Brakes and Hub/Drum Recommendation for Hayes 3,500 lb AxleI recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K as this is a correct fit for your 3,500 lb Hayes axle. For the 10 x 2-1/4 inch drum on your Hayes/AL-KO axle, I recommend the Hayes 10 Inch Electric trailer Brake Assembly # 60202703 for the right hand side and # 60202803 for the left hand side. These brakes are specifically designed to fit Hayes/AL-KO axles.
view full answer... - Does Replacement Hub Just Need Bearings That Matched Previous HubYes, so long as you find a hub that has bearings that matched the hub you had previously, the hub will fit your spindle. For example, if you had a hub with inner bearing L68149 and outer bearing L44649 you would use Trailer Hub and Drum Assembly - 3,500-lb Axles # AKHD-545-35-K. I have added a link below to our entire selection of hubs for you to check out, and you can filter through them by bearing number to find the correct one.
view full answer... - Recommendation For Brakes And Drums For 3,500 Pound Capacity AxleTo add brakes, you will need 4 bolt mounting flanges that are hopefully already included on your axle. If not, you will need to work with a certified welder to get them properly added. Assuming you have flanges or will have them professionally added, you will need to select hub-and-drum assemblies that are compatible with your trailer spindles. You will do this by matching the bearings and seals of your trailer with the proper hub-and-drum assemblies. Based on the information you...
view full answer... - Parts Needed to Add Electric Drum Brakes to Trailer with 3500-lb AxleAdding electric brakes to a 3500-lb trailer axle is a straightforward process that is outlined in the linked article. This recaps each of the considerations and items needed to install electric drum brakes on your axle. The items required include a brake flange on the spindle, the brakes themselves, hub/drums, wiring, a breakaway kit like # 20099 and a trailer brake controller like the excellent Prodigy P2 # 90885. Brake controller installation varies by vehicle; some vehicles with a...
view full answer... - Replacement Brakes, Drums, And Bearings For A 2007 American Hauler Trailer With BD-545 AxleTek DrumsWe can definitely get you what you need. The BD-545 refers to a 5 on 4-1/2 bolt pattern, 10 inch drum, and a 3,500 pound axle capacity. With that being said, our Trailer Hub and Drum Assembly # # AKHD-545-35-K (or # AKHD-545-35-EZ-K if you have EZ-Lube axles) will be a direct replacement. Both of these options come pre-greased and include inner and outer bearings, grease seal, and grease cap, though the EZ-Lube # AKHD-545-35-EZ-K includes both style caps. For the brakes, you have two options...
view full answer... - Recommended Over Under Kit and Hub/Drum/Brake Assemblies for 3,500 lb Axles3,500 lb trailer axles are 2-3/8 inch in diameter so for an over-under kit that would fit that you'd want the part # K71-384-00 and you'd be set. Then for new brake assemblies you'd want the part # AKEBRK-35-SA and for hub/drums you'd want the # AKHD-545-35-K which comes with bearings and is actually pre-greased.
view full answer... - What is the Capacity of an Axle That Has Dexter 8-147 HubsWith you having a Dexter 8-147 hub, you will have a 3,500 pound capacity axle. The measurement you got with the lug bolts means you most likely also have their Vintage 4 on 9.4 bolt pattern, but with even wheels you need to measure center to center of bolts directly across from each other. However, the 8-147 hub is no longer being produced. They can still be found, but it is not going to be an easy process. What may be easier will be to replace the hubs with something much more common,...
view full answer...
- Correct Replacement for Dexter Trailer Hub and Drum Assembly 008-247-05The correct replacement for the Dexter Trailer Hub and Drum Assembly 008-247-05 is the Dexter Trailer Hub and Drum Assembly part # 84546UC3 or if you're looking for a more cost effective replacement, the Trailer Hub and Drum Assembly part # AKHD-545-35-K.
view full answer... - Standard Style Trailer Hub that Fits as Replacement for Dexter Hub 8-245The part number 8-245 is an obsolete part number but I was able to find some info on it. It was basically a 3,500 lb hub and drum that fit a 84 spindle. Because of that we have a solution that will fit. The part # AKHD-545-35-K is a 3,500 lb hub/drum that would fit the spindle you have on your trailer. This hub does have a 5 on 4-1/2 inch bolt pattern which is basically the most common bolt pattern that a trailer wheel could have. For without brake drums you'd need the part # AKIHUB-545-35-G-EZ-K...
view full answer... - Replacement Brake Assemblies for BD2-545-17The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K that you referenced.
view full answer... - Can Dexter Nev-R-Adjust Brake Assemblies be Used with Boat TrailerYes, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 that you referenced can be used on a boat trailer. I know what you are probably thinking...and that dipping electric brakes in water when backing the boat down the ramp is a bad idea, but it actually is very rarely an issue. People do it all the time and everything works just fine. To be extra cautious some people unplug their trailer wiring when backing down the ramp but most don't even think twice about it and are totally...
view full answer... - Are Electric Trailer Brake Assemblies Specific to Drivers or Passenger Side of TrailerThe etrailer brand 10 inch trailer brake assemblies like # AKEBRK-35L-SA are side specific. For the left you'd use # AKEBRK-35L-SA and # AKEBRK-35R-SA for the left. How to tell the difference? Hold the brake assembly so the magnet is at the bottom. Then look at the back of the brake assembly. If the brake magnet wires exit the backing plate on the left, it's a left hand (driver's side) assembly. If they exit on the right, it's a right hand (passenger side) assembly. Many times the brake...
view full answer...
- Replacement Drum Brakes For AL-K0 8490When looking into the AL-K0 8490 references an AL-K0 hub for a 3,500 pound axle with a 10 x 2-1/4 inch drum and a 5 on 4-1/2 inch bolt pattern. There are two sets of brakes I would recommend looking at the will work for your popup camper. The Electric Trailer Brake Kit For Self Adjusting Brakes # AKEBRK-35-SA or The Electric Trailer Brake Kit For Manual Adjust # AKEBRK-35. If you would also like to replace the hubs on your axle, as long as your existing AL-K0 hub uses an # L68149 inner...
view full answer... - Recommended Storage Cover For A 2007 Skyline Rampage M187LTD Toy HaulerWhen choosing the correct storage cover for your 2007 Skyline Rampage M187LTD toy hauler I recommend The Adco SFS AquaShed RV Cover for Toy Hauler Travel Trailer - Up to 24 foot Long - Gray # 290-52272. This cover can cover up a toy hauler between 20 feet to 24 feet long. This cover works best for short-term storage in moderate climates with moderate moisture. The cover has zippered panels on both the passenger side and the rear which offers easy access to the travel trailer interior....
view full answer... - Correct Replacement for 10 Inch x 1-3/4 Inch Braking AssembliesThe 10" x 1-1/2" braking assemblies part # K23-472-473-00 will use the same four bolt brake mounting flange as the 10" x 1-3/4" braking assemblies you have but the hub/drum that goes with these uses a LM67048 inner bearing and L44649 outer bearing which I don't believe is correct for your trailer. The most common replacement for the 10" x 1-3/4" braking assemblies you have are going to be the 10" x 2-1/4" braking assemblies, part # 23-26-27. The correct hub/drum for this is part # AKHD-545-35-K...
view full answer... - What Spindle Dimensions Does Trailer Hub and Drum Assembly AKHD-545-35-K FitFor a trailer as old as yours I can say that it's pretty unlikely any of the hubs made currently are going to fit since designs have changed since then. But someone could have updated the axle to something newer so you never know. So the spindle of your axle would need to have diameters of 1.378 and 1.063 where the bearings ride for hub # AKHD-545-35-K to fit.
view full answer... - What Grease to use with etrailer Pre-Greased Trailer HubThe LMX Red grease like the part # L11390 would be what you'd want to use in the hub you have. This grease is perfectly compatible with the grease in the hub so you wouldn't have to do any excessive cleaning.
view full answer... - Parts Needed To Add Electric Brakes to a Master Tow 80THD Tow Dolly We have all the parts you will need to add a set of electric brakes to a Master Tow 80THD tow dolly but they don't come in kits. I recommend installing electric brakes. It looks like Master Tow includes brake mounting flanges so you will need the following parts: Brake Assembly - Electric Trailer Brake Kit item # AKEBRK-35 - Sold as a pair Hub & Drum Assembly - Trailer Hub and Drum Assembly item # AKHD-545-35-K - Sold individually you'll need two. Trailer Wiring Junction Box item #...
view full answer... - Hub Assemblies For 3500 lb Axle On Tandem Axle Car Hauler 16 FootFor a 3500 lb axle, your options for bearing sizes are greatly narrowed down so that makes things a lot easier. You just need to determine your bolt pattern of your wheels. For traditional 5 on 4-1/2 inch bolt pattern, Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter, I recommend # AKHD-545-35-K. For 5 on 5 inches, I recommend # AKHD-550-35-K. For 5 on 5-1/2 inches, I recommend the # AKHD-555-35-K. For 6 on 5-1/2 inches, I recommend the # AKHD-655-35-K. If you have axles...
view full answer... - Recommended Hub's and Brakes for a Rockwell 3,500 lbs Axle I would be happy to! Rockwell was bought out by Axletek years ago so we know their axles are compatible with Dexter hubs like item # 84546UC3-EZ. The Trailer Hub and Drum Assembly item # AKHD-545-35-K you were already looking at is exactly what you need though and that's what I recommend using. These have a 5 on 4-1/2 lug pattern and will work with wheels up to 15". They are sold individually. For brake assemblies you can pick up the Dexter Nev-R-Adjust Electric Trailer Brakes item #...
view full answer... - Replacement Hub/Drum for UFP HD1377 on TrailerWe have had a customer with your same UFP hub HD-1377 successfully use as a replacement the hub/drum # AKHD-545-35-K which works on 3500-lb axles. This hub uses inner bearing # L68149 (1.378" inner diameter) and outer bearing # L44649 (1.063" inner diameter). If your original hub bearing numbers or inner diameters match this will work fine. For a Bearing Buddy you'd then need the # BB1980A.
view full answer... - Hub and Drum Assembly Compatibility with Lippert 3,500 lb Axle The really good news is almost all 3,500 lb axles from every manufacturer are a standard size. They have different spindle sizes for almost every other capacity but 3,500 lb axles are consistent. The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K are the size that will fit your Lippert axle so you will be good to go. Just use grease like the # L11390 and make sure the bearings are packed well prior to installation.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alexander C
Video by:
Zach D
Video by:
Jonathan Y
Test Fit:
Shane H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
5/16/2024
Definitely not what we want to happen. I can have a replacement grease cap sent out to you right away.