bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 5-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased

Item # AKHD-555-35-EZ-K
Our Price: $66.46
Trailer Hubs and Drums
Shipping Weight: 24 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased part number AKHD-555-35-EZ-K can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKHD-555-35-EZ-K

  • 5 on 5-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Easy Grease
  • EZ Lube
  • Pre-Greased
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


  • Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 10-15/16" diameter x 2-10/16" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 5-1/2"
  • Wheel studs: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.

E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

KBD2-555-19 AxleTek 10" Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5-1/2 - EZ Lube - Pre Greased

Compare to Dexter 84557UC3-EZ

Customer Satisfaction Score:

Customer Reviews

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased - AKHD-555-35-EZ-K

Average Customer Rating:  4.6 out of 5 stars   (16 Customer Reviews)

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Replaced all 4 hubs with these. It's like having a new trailer! Very satisfied with the easy installation and quality of product.


I was totally surprised the drums showed up three days after I ordered them.. they solved my problem and they look great. The price is the best around and easy to install. I did use the caps on my wheels. I needed to get rid of 4 lug wheels and put on 5 lug for hauling and safer operations. Old and new pics.


Decent price. Excellent shipping speed I haven’t used product yet but it seems to be of good quality


brakes and hubs got them within 2 days everything that I ordered was in the box!!!
Best customer service I have ever had. When I placed my order within a hr. I got a call telling me that the hubs I ordered where on back order but they had some other ones that where just a couple dollars more and they where US made. Kept me informed the whole order via email and tracking system is awesome!!! Will definitely order from them again. Did alot of research and they beat everyone's price hands down!!! Thank You!!!


Brake drums were exactly what I ordered. etrailer was amazing, I ordered on a Sunday afternoon around 5:00 PM and within about 30 minutes I received a call form them with a couple of questions about my order and by around 8:00 PM I had received an email that my order was shipped. All my parts showed up by Wednesday in perfect condition. I installed them all on Friday afternoon, everything was a perfect fit. Now my 20 year old trailer is like new and ready for the trip Im about to take it on across country.


I was well pleased with parts , but you might want to put in a heavier box it was busted open


Perfect fit! good quality drum and hard ware


Got them on time. They are better quality than the originals. The casting on originals were almost oblong. These run straight and true.


Great product at great price and even better customer service. Thanks Paula S


Product was correct and was just as des cribed.


Good price with quick free delivery and great customer service.







See what our Experts say about this etrailer Trailer Hubs and Drums

  • Is Trailer Hub AKHD-555-35-EZ-K Designed for Lug-Centric or Hub-Centric Wheel Installation
    The Trailer Hub and Drum Assembly # AKHD-555-35-EZ-K that you referenced is designed for use with wheels that are lug centric since it comes with studs mounted to it and lug nuts that are cone shaped. Hub centric setup use wheel bolts that thread into the hub after passing through the wheel. The entire weight of the wheel would be on the studs and not through the pilot diameter of the wheel.
    view full answer...
  • Does The AKEBRK-35 Come With Hubs And Bearings
    No, the electric brake kit # AKEBRK-35 does not come with hubs and bearings. # AKEBRK-35 includes the brake assemblies only. That being said, we do carry the hubs for a 3,500 lb axle. I recommend the # AKHD-555-35-EZ-K. This uses the standard L68149 inner bearing and L44649 outer bearing. This hub comes pre greased and packed with bearing seals and races. The grease caps and lug nuts are also included. I have linked our assembly/installation video below if you want to take a look.
    view full answer...
  • Hub Assemblies For 3500 lb Axle On Tandem Axle Car Hauler 16 Foot
    For a 3500 lb axle, your options for bearing sizes are greatly narrowed down so that makes things a lot easier. You just need to determine your bolt pattern of your wheels. For traditional 5 on 4-1/2 inch bolt pattern, Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter, I recommend # AKHD-545-35-K. For 5 on 5 inches, I recommend # AKHD-550-35-K. For 5 on 5-1/2 inches, I recommend the # AKHD-555-35-K. For 6 on 5-1/2 inches, I recommend the # AKHD-655-35-K. If you have axles...
    view full answer...
  • Trailer Hub Recommend for Utility Trailer with 5 on 5-1/2 inch Bolt Pattern L44649/L68149 Bearings
    The spindles of an EZ lube axle are the exact same as a non-EZ-lube. Only difference being the zerk fitting at the end of it. The EZ lube hubs we offer are the same as the non-EZ-lube hubs with the only difference being the grease cap has a rubber plug that fits the cap. For a replacement hub to replace yours with a 5 on 5-1/2 inch bolt pattern and matches your bearings of L44649/L68149 you would wan the part # AKHD-555-35-K for a non-EZ lube or part # AKHD-555-35-EZ-K for EZ-lube style.
    view full answer...
    Image 1 for
  • Replacement Brake and Hub and Drum Kit for Dexter 3,500 lb Axles
    We do! For a brake kit I recommend going with the Self-Adjusting Kit # AKEBRK-35-SA for electric brakes or the Free Backing Kit # AKFBBRK-35 for hydraulic brakes. When it comes to the hub and drum assembly you can choose out of the following based on your bolt pattern: 5 on 4-1/2" - # AKHD-545-35-EZ-K 5 on 4-3/4" - # AKHD-5475-35-EZ-K 5 on 5" - # AKHD-550-35-EZ-K 5 on 5-1/2" - # AKHD-555-35-EZ-K 6 on 5-1/2" - # AKHD-655-35-EZ-K I am attaching some helpful articles that you can check...
    view full answer...
  • What 5 On 5 1/2 Hub Available For Timbren Axle-Less Trailer Suspension System
    The Timbren options we have available fit a 5 on 4-1/2 bolt pattern or a 6 on 5-1/2 bolt pattern. I recommend measuring your bolt pattern to make sure 5 on 5-1/2 is what you need. To confirm your measurement, use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it (article on bolt patterns attached). If this measurement is 3-1/4 inches then you have a confirmed 5 on 5-1/2 pattern. If the 5 on 5-1/2 pattern holds true then a Timbren option...
    view full answer...
  • Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
    We will have several different pre packed hub assemblies for you to choose from depending on if you need a hub for drum brakes or hubs for an idler axle. Here is a list of hubs for both drum and idler axles in the different bolt patterns that use the Outer Bearing # L44649 and Inner Bearing # L68149. All the kits include both a solid grease cap and one with a removable insert for easy grease spindles. Easy Grease Trailer Hub and Drum Assembly, 5 on 4-1/2" # AKHD-545-35-EZ-K Easy Grease...
    view full answer...
  • M416A1 Military Trailer Swapping Out Brakes for Electric With Parking Brake
    It would be best to go ahead and change out the drums when you install the new Brake Assemblies # K23-086-087-00. This will ensure that the brakes do wear in properly. I recommend using the Trailer Hub and Drum Assembly # AKHD-555-35-K. Of course you will want to verify that you have the same spindle that is required for this assembly. The spindle dimension for the grease seal is 1.719", the inner bearing is 1.378" and the outer bearing is 1.063". If those match your spindles than this...
    view full answer...
  • Do Brake Assemblies Come With The Hub/Drums?
    The Electric Trailer Brake Kit - 3,500 lbs # AKEBRK-35 does include both right and left hand brake assemblies, but it does not include the drums or mounting hardware. The mounting hardware is pretty straight forward with part # BRKH10B, but the drums will be a little more complicated. But not overly so. What you will need to do to find the correct hub/drum is determine the bolt pattern of your current set up. This is a pretty easy thing to do, but you will need to take an accurate measurement...
    view full answer...
    Image 1 for
  • Parts Needed To Replace Brakes And Hubs On 2 Axle Alcom Car Hauler
    Alcom trailers come in all kinds of sizes and configurations and so you will need to choose the correct brake and hub assemblies for your particular trailer. For example, one style of Alcom tandem axle trailers have 3,500-lb axles with 10 inch brakes. If this describes your trailer then Electric Trailer Brake Kit Item # AKEBRK-35-SA includes left and right hand assemblies and works with 3,500-lbs axles could fit your needs. Likewise, a replacement for your trailer hubs and drums common...
    view full answer...
    Image 1 for
  • Parts Needed to Add Electric Drum Brakes to Trailer with 5-on-5-1/2 Bolt Pattern 15-Inch Wheels
    To find hub/drum assemblies for electric drum brakes that will fit your existing spindles you will need to find the bearing part numbers from the existing hubs. The 5-on-5-1/2-inch bolt pattern hub/drums we offer for 15-inch wheels are shown on the linked page. These are available in weight capacities to match 2000-, 2200- and 3500-lb axles. Be sure to choose hubs rated for your axle; usually there will be a plate or sticker on the axle that tells you its weight rating. For example, if...
    view full answer...
  • Recommended Brake Assemblies and Hubs for 3500 lb Axle
    The Trailer Hub and Drum Assembly - 5 on 5-1/2 inch bolt pattern # AKHD-555-35-EZ-K is my recommendation over the Dexter # 84557UC3-EZ. They are basically the same assembly made by different manufacturers and the Dexter assembly simply has the price difference you noted for their name. The products will both work well with a brake assembly like the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35 or the self-adjusting # AKEBRK-35-SA. My recommendation...
    view full answer...
  • Correct Hubs-Drums and Brakes for Lippert 3,500 lb Spindle
    The Lubed 4" Drop Spindle with Brake Flange for 3,500-lb Axle # LC12338, uses standard 10" diameter hubs and brakes, for which we have the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA. For the brake mounting hardware (nuts and lock-washers) you can use part # BRKH10B. The most common hub-drum assembly for this application is part # AKHD-545-35-EZ-K, with a 5 on 4-1/2 wheel bolt pattern. However, depending on the wheels you plan on using,...
    view full answer...
  • How to Determine Replacement Hub For Fleetwood Pop-Up Camper
    I'll just be honest, there is not a simple way to find the hub assembly for your Fleetwood pop-up camper. It doesn't take someone with an advanced degree or anything it's just a bit of a pain in the behind. But it's also necessary, and what you need to do is take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper...
    view full answer...
    Image 1 for
  • 3,500LB Hubs, Brakes and Spindle Needed For a 5 on 5-1/2" Bolt Pattern
    First we have both Idler Hubs # AKIHUB-555-35-EZ-K and Hub and Drum Assemblies # AKHD-555-35-EZ-K with the 5 on 5-1/2" bolt pattern you are looking for. Each one includes one hub with the pre-greased bearings installed with a grease seal. If you are needing the hub and drums I recommend the Electric Trailer Brake Kit # AKEBRK-35-SA if your trailer will use electric brakes. Or the Hydraulic Trailer Brake Kit # AKFBBRK-35 for use with surge brakes. For the spindle the closest we have to...
    view full answer...
  • Replacement Axle for 2,000 Pound Dexter Axle on a Pop-Up Camper
    We have straight axles that are close to the measurements you have provided, see link, but the spring seats would have to be moved and none of them have brake mounting flanges. I propose a different approach by using a Timbren axle-less system # ASR2KHDS01. This system will provide the "axle" as well as the suspension in one unit plus the suspension part will not wear out nearly as quickly as traditional leaf springs because the rubber won't corrode. They are also set up for electric brakes. The...
    view full answer...
  • Timbren Axle Less Suspension for Off-Road Trailer with 5 on 5-1/2 inch Bolt Pattern
    We do have a Timbren Axle Less setup that can have the bolt pattern you are wanting of 5 on 5-1/2 inches if you went with the part # TASR1THDS04 and then the hub/drum # AKHD-555-35-EZ-K with the brake assemblies # AKEBRK-35-SA and you'd be set.
    view full answer...
  • Recommended Brakes, Hub/Drum Assemblies And Axle-Less Suspension System For Tandem Axle Car Hauler
    Unfortunately the bearing sizes are not for any standard spindle sizes. I'm afraid that we don't have anything that will fit those spindles. My recommendation is to use the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05. This is a bolt on system that uses either a cross brace or a 2 inch square tube for connection instead of a thru-axle. For this system, I recommend using the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right...
    view full answer...
  • Replacement Trailer Brakes and Hubs For 2012 Jayco Jay Feather Ultra Lite X213 Travel Trailer
    Yes, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 will fit your 2012 Jayco Jay Feather Ultra Lite X213 travel trailer. Be sure to inspect your drums to determine if you also need to replace them due to excessive wear. The Easy Grease Trailer Hub and Drum Assembly # AKHD-555-35-EZ-K includes new bearings, races, lug nuts and a grease seal making installation much easier. In the event your hubs are still good the Bearing Kit # BK2-100 may be needed to replace your bearings...
    view full answer...
  • Parts Needed To Install Electric Trailer Brakes On a 3,500LB Idler Hub Trailer Axle
    Those measurements are consistent with a 3,500LB axle. I do recommend verifying the grease seal measurement as well as I have seen trailer axles that use a slightly smaller inner diameter Grease Seal # 168255TB(1.687"). If your grease seal landing measures 1.719" then the kit I recommend below will have all the correct components. You will need a Brake Flange # 4-35 on your axle. If you do not have one the axle should be taken to a shop to have this flange welded on as they will have...
    view full answer...
  • Does the Demco Hydraulic Drum Brake Assembly Come With the Drum?
    I do have a solution for you but the answer to your question is no, the Demco Hydraulic Drum 3,500 lbs - 10" Brake Assembly # DMSB24429M is just the brake assembly without the drum. Keep in mind that when selecting a brake assembly and hubs that you make sure they will have the same weight capacity that your axle has. You will want to make sure that whichever brake assembly you choose that you get the Right Hand side as well, in this case it would be the Hydraulic Drum Brake part # DMSB24428M. I...
    view full answer...
  • Timbren Axle-Less Suspension System Compatible with Jeep for Matching Trailer
    For the Timbren Axle-Less kit compatible with the bolt pattern of 5 on 5 like a Jeep, you would need the 2,200 lb capacity # ASR1THDS03. The spindles on the Timbren system are a little larger than their thru-axle counterparts, so the 3,500 lbs # ASR3500S06 will only fit larger hubs that won't have the bolt pattern you seek. Using # ASR1THDS03, you can then use the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 # AKIHUB-550-35-EZ-K or the Trailer Hub and Drum Assembly...
    view full answer...
  • Is There A Bearing Buddy That Will Replace A Tie Down Engineering 48399GA Turbo Lube Cap?
    From what I could find, the Tie Down Engineering 48399GA Turbo Lube cap you have will measure 2.33" at the threads. This is a pretty odd size and, unfortunately, there is not a Bearing Buddy kit currently available to fit this. The closest we have to this size will be the Bearing Buddy # BB2441T-SS (2.441" hub bore) or Bearing Buddy # BB2328 (2.328" hub bore), which is not threaded. The only way we can get a Bearing Buddy for you would be to replace the hubs with something that has a more...
    view full answer...
  • Will 10 Trailer Brakes and etrailer Hub and Drum Assembly 10 Fit TImbren Axle-Less ASR2KHDS03?
    They sure are! The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Wide Tires - 2,000 lbs # ASR2KHDS03 you were looking at has the 4 bolt mounting flange which will fit the Dexter Electric Trailer Brake Kit w/ Parking Brakes - 10" - Left/Right Hand Assemblies - 3.5K # K23-086-087-00 perfectly. In addition the Timbren # ASR2KHDS03 uses inner bearing # L68149 and outer bearing # L44649 which is exactly what the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10"...
    view full answer...

< Previous

Do you have a question about this Trailer Hubs and Drum?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Ryan G
Installed by:
Ryan G
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924