Hub and Drum Assembly Compatibility with Lippert 3,500 lb Axle

Published 04/18/2019

Products Featured in This Question

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1292)

$91.20

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

(275)

$9.64

Question:

Hello, I’m trying to verify if this would be the correct hub and drum assembly that would replace mine. I will need 2 of them. Preston already sent me information for the brakes. The information cast into my hub and drum is: TRurYde RVD-H-545. Its on a 3,500lb Lippert Axle model #: V000163632. On your web site this is the hub and drum assembly I found: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10inch Diameter - 5 on 4-1/2 Item # AKHD-545-35-K In the Specs section it shows it is compatible with Lippert. Application: 3,500-lb axles with #84 spindles I have no idea what spindle is on my axle Compatible with standard axles from most manufacturers, including Dexter, Lippert LCI, and AL-KO Thanks for your help

asked by: Albert Y

Expert Reply:

The really good news is almost all 3,500 lb axles from every manufacturer are a standard size. They have different spindle sizes for almost every other capacity but 3,500 lb axles are consistent.

The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K are the size that will fit your Lippert axle so you will be good to go. Just use grease like the # L11390 and make sure the bearings are packed well prior to installation.

expert reply by: Jason S