To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In-stock alternatives that can ship today
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
Features:
Specs:
The bases of these Rhino Rack legs easily mount into the included Rhino-Rack RTC-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.
Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.
Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.
To install a leg in a base, pinch and slide the internal triggers together.
Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.
Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.
Alternate Instructions
Average Customer Rating: 4.8 out of 5 stars (812 Customer Reviews)
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.Just as expected! 939508
Just finished installing the rack on the cap of a F150. It seems to be well made. I haven't yet carried anything, but I am confident that it will work well. 939371
Good product value and excellent service from etrailer. Parts arrived sooner than expected. 821736
Well engineered and sturdy. Good Directions but I thought they were a little hard to follow. I used Blue painters tape to hold bottom rails in place and get squared up on topper. I liked the way the bottom rail attaches to the topper. Probably figure on an afternoon to install. Only negative is my topper is 63 inches. Bottom rails were 63 inches. The end plugs stuck out three inches overlap. I cut them off. To Make this work, you need perfect 90 degree corners. My topper has curves so could not come in exactly 15 mm (why Metric) from end. So could not attach end plugs as directed. This will work well with my Porta Bote. 791394
The lady who took my order was extremely helpful and pleasant to work with. The product is everything it said it would be. I am happy with both the product and the service. 783508
Awesome product, easy install, had mishap with garage door, called etrailer and they connected me with Rhino to get replacement parts!!! Thanks 745842
Great product , etrailer video made install so simple. Delivery of purchase come very quick. 737411
Worked as advertised. 667815
Very well made 614344
Rack is very high quality. Quiet ride at all speeds. Installation video extremely helpful. The only issue I encountered was that the mounting bolts were bearly long enough to get through thickness of truck cap. I had to remove plastic thumb nuts and use thin fender washers to make it work. Very stressful situation after drilling 12 holes in my cap! These bolts need to be longer to allow for different thickness in caps. Otherwise, very satisfied with this rack. 603056
So far so good. I paid a professional (camper shell place) to install it and it took them a bit over an hour to do so. Looks great and I'm confident it will do the job. Whistling noise at speeds above 40 or so, but I have yet removed the crossbars - assuming it will be quieter when I do so. 557696
Mike L - 08/25/2018This may very well be a great product when it comes to its functionality, but the installation was fraught with problems. 1). There were two sets of instructions in box, but the materials list only applies to one of the sets of instructions. Thankfully I counted the hardware before I started drilling the holes. Unfortunately, I didn’t count the o-rings. First trip to the hardware store. 2). I finish drilling the holes and place the track onto my truck cap, get into the bed of the truck and start the t-nuts. And half of the t-nuts won’t thread onto the t-bolts. I look closely at the two t-nuts I have left over and notice casting slag literally covering most of the threads. Back to the hardware store for a thread die to clean the threads. 556951
The product is great as usual with rhino rack. However the best thing about this order was how helpful etrailer.com was. They went above and beyond to make sure I had everything I needed. Thanks again. 552095
Product is installed on 2015 GMC Sierra extended cab with a fiberglass A.R.E. bed cap (6.5' bed). System works well and the bars are strong and solid. The cross-bars and risers can be removed quickly and easily (with the proper key) leaving only the pads clamped in place on the rails. Cross-bars and risers can be installed on the pads very quickly. Installation was straightforward and easy, except for the rubber strips that fill the grooves in the crossbars - those were the most difficult part of the installation - to get those to seat correctly (so I lowered rating by 1 star). 545668
Pretty easy to install with the excellent video provided. If you follow the video, it’s a breeze! Excellent product! 528425
I purchased this rack system for my 2016 Jeep Wrangler Willy's Wheeler edition - 2 door! There are lots of products out there that are listed for the 4 door but the two door model is more difficult to shop for. The racks shipped immediately and were here in just a few days. All the parts were there, properly labeled and provided with clear instructions. To properly fit my small roof, I took the two roof rails to a local machine shop and had them cut them to exactly 35.5". This allowed me to mount the tracks in the outermost groove on the roof and gave me the greatest possible length. One problem that I had (and had predicted) is that the inside of the Jeep roof has a lip on the inside that interferes with the provided knobs seating properly against the inside of the roof. The local hardware store had no nuts (NOTHING) that would fit the threads of the provided T-Bolts. I ended up temporarily using solid metal spacers to fill the gap and allow me to tighten the provided knobs against the spacer which is against a rubber gasket and then the inner roof! It worked! In the meantime, I will continue to search for some safety nuts that will fit the Rhino provided T-Bolts. The rack looks great, is solid as a rock and easy to put on and remove! Now I can comfortably carry our kayaks and/or paddle boards to the lake! 523972
This Rhino Rack roof rack system worked out very well for me. I installed it myself and took my time doing it. The rack system will work great with my RTT. It's easy to adjust and looks great on truck. For the installation, I decided to use a center line down the middle of my canopy (shell) as my reference point for all measurements. I simply identified the middle of the third brake light on the shell and the third brake light on the back of the cab. I then snapped a chalk line from those points to mark the middle of the canopy. This method worked out great and the rails are perfectly parallel to each other. The folks at etrailer.com were especially helpful. I had a slight glitch with a minor part in the kit and Bill at e-trailer got it resolved very quickly. He even followed up by calling me directly to give me an update. Truly exceptional customer service. Thanks to all at etrailer. They will definitely get more of my business. 497821
Fast delivery. Excellent customer service. etrailer video makes it an easy install 454662
The Rhino T-Load Hitch and Vortex Aero roof rack system are very well designed, strong and straightforward installations. We have a Hobie Tandem Island sailing kayak, 18.5' long and around 200 lbs. on the roof racks / T-hitch, it is very solid. The T-hitch assembled in 15 minutes. Had my neighbors, both engineers, not come over to "help" with the roof rack install it would have been done in an hour. Lesson learned, keep the software developers over in their yard during install, away from power tools, no drilling allowed. Rhino systems and support staff are outstanding. Definitely recommend these products and the company. 439535
Nice quality product and I like how it attaches to the vehicle. It was easy to install. The unexpected downside is, these racks are slightly large diameter than those by Yakima. I own 4 or 5 Yakima accessories that I just assumed would mount on these as well, but none of them fit and there don't seem to be any adapters that will work. 426434
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.