1. Trailer Spindles
  2. TruRyde
  3. For 3500 lb Axle
  4. Standard Spindle
  5. 2 Inch Diameter
  6. Round
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter

#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter

Item # TRU24FR
lowest price pledge
Our Price: $62.50
Trailer Spindles
Orders above $150 qualify for Free Shipping
Shipping Weight: 5 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replacement #84 spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included. Lowest Prices for the best trailer spindles from TruRyde. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter part number TRU24FR can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (40)
  • Photos
  • Why etrailer?

TruRyde Trailer Spindles - TRU24FR

  • For 3500 lb Axle
  • Standard Spindle
  • 2 Inch Diameter
  • Round
  • TruRyde

Replacement #84 spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.


  • Tapered spindle replaces a worn or damaged #84 spindle on your trailer
    • Can also be used to build a custom axle
  • Weld-on installation
  • Sturdy steel construction
  • Castle nut, washer, and cotter pin included


  • Application: 3,500-lb trailer axles
    • Spindle capacity: 1,750 lbs
  • Stub dimensions: 2" diameter x 2-3/4" long
  • Overall spindle length: 8-1/4"

Bearing, Race, and Seal Information

  • Bearings (sold separately)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (sold separately)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (sold separately): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

spindle diagram

Part NumberCapacityABCDEFRound/Square
TRU24FR1,750 lbs2.00"1.719"1.378"1.063"1.00"2.75"Round

SP-20084NWC TruRyde (TRP) Replacement #84 Spindle for 3.5K Axles - 2" Diameter x 8.25" OAL

Replaces R40484

Customer Reviews

#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter - TRU24FR

Average Customer Rating:  4.8 out of 5 stars   (14 Customer Reviews)

Replacement #84 spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.


very nice people to deal with, will order from etrailer when i need more trailer parts. shipping and delivery is very prompt.


Fast shipping...Thanks


right size works as advertised


Only one i could find anywhere that was a true 2” shaft. Worked great












Ask the Experts about this TruRyde Trailer Spindles

  • Correct 5 Bolt Hub for #84 Spindle for 3,500-lb Trailer Axles
    Yes, I can confirm the Trailer Idler Hub Assembly part # AKIHUB-545-35-K will work with the #84 Spindle for 3,500-lb Trailer Axles part # TRU24FR.
    view full answer...
  • Recommended #84 Spindle for a 3500 Pound Axle Measuring 2-3/8 Inches in Diameter
    The TruRyde #84 Spindle # TRU24FR does have a 2 inch diameter, but that is actually designed to fit inside the 2 3/8 inch axle. The stub on the end will extend inside the axle a little ways allowing for added support
    view full answer...
  • What Size Axle Does a #84 Spindle Fit
    A true 1 inch spindle is a BT8 spindle, like # TRU94FR. The next closest one would be the BTR spindle which is commonly referred to as a 1-1/16 inch spindle, like # TRU44FR and is more common than the BT8. Both of these are typically used with 2,000 lb axles. A #84 spindle, like # TRU24FR or # TRU47FR is bigger and is used for 3,500 lb axles. Common sizes for these are 2-3/8 inch round axle, 3 inch round axle, and 2 inch square axle. I have linked a helpful page that shows the different...
    view full answer...
  • Idler Hub for Trailer Axle with 1-1/16 Inch and 3/4 Inch Tapered Spindle
    I do have an option for you but we do not offer any trailer hubs with bearings that match the dimensions you provided. Therefore, we can either offer you a new spindle like the TruRyde Spindle part # TRU24FR or a new axle like the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. There is not a lot of room for error when replacing a spindle therefore unless you are an experienced welder then replacing the axle will be your best option. In order to recommend a replacement...
    view full answer...
    Image 1 for
  • Spindle Dimensions of a 3500 lb Axle
    3500 lb axles have the most common and most consistent spindle sizes. They are typically 1.73 inches at the seal, 1.38 inches at the inner bearing and 1.06 inches at the outer bearing like # TRU24FR. I've attached a video to assist. I've linked the page to all of the options for hubs or hub/drum assemblies for this size spindle. There are 4 different sizes for 5 bolt assemblies and I've attached an article to assist.
    view full answer...
  • Replacement Hubs Based on Tapered Spindle Measurements
    If you give me the tapered spindle measurements like in the attached photo, I can help you get the replacement hubs you need. I need the measurements at letter B where the seal sits, letter C where the inner bearing rides, and letter D where the outer bearing rides. The only other thing I will need is bolt pattern and whether you want idler hubs, drum brakes, or disc rotors. I've attached an article to assist with bolt pattern to match your wheels.
    view full answer...
    Image 1 for
  • What Grease Seals Do I Need For An # 84 Spindle
    If the inner diameter bearing on your spindle measures 1.38" and the outer diameter bearing measures to be 1.06", then you have a #84 spindle such as part # TRU24FR rated for 3,500 lb. trailer axles. The correct grease seals for this spindle are Grease Seal - Double Lip part # 58846 which has an inner diameter of 1.719" and an outer diameter of 2.565". As the grease seals are a very tight fit, you may want to use a block of wood and mallet to get the seals to seat properly. Attached is...
    view full answer...
  • Hub Recommendation to fit 84 Spindle TRU24FR
    For an idler hub to fit the 84 spindle part # TRU24FR we have the part # 84545BX as a confirmed fit. This has a bolt pattern of 5 on 4-1/2 inch which is very popular but we do not recommend you use vehicle wheels on this hub.
    view full answer...
  • Availability of Spindle that Would Fit Square Tube Axle
    New spindles should be welded on only by a professional welder who has experience and the correct jigs for installing spindles perfectly straight and concentric. If not installed correctly the trailer may not track properly and uneven tire wear can occur. It might be more trouble than it's worth to try and fit a round spindle like the part # TRU24FR in a square tube axle by trimming it. We have a square version of this spindle as part # TRU47FR.
    view full answer...
  • What Are the Dimensions of the TruRyde #84 Spindle for 3,500-lb Trailer Axles
    The #84 Spindle # TRU24FR is 8-1/4" long with a 2" diameter stub. This spindle will fit the following bearings and components, which are all sold separately: Bearings- Inner bearing: # L68149 (1.378" inner diameter) Outer bearing: # L44649 (1.063" inner diameter) Races- Inner race: # L68111 Outer race: # L44610 Grease seal: # 58846 Inner diameter: 1.719" Outer diameter: 2.565"
    view full answer...
  • Replacement 5 On 5 Idler Hub For Homemade Trailer
    I have a couple options for your consideration as we do not have a replacement hub or bolt on spindle that will fit your combination. First you can remove your spindle brackets and have new #84 Spindles # TRU24FR welded in place of the current spindles. This would move you to the most common spindle size and allow you to use the Trailer Idler Hub Assembly # AKIHUB-550-35-K. This will come preloaded with the new bearings, races and grease seal installed and greased. The second option...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Availability Of 5-5 1/2 Inch Hub Assembly, Spindle, Bearings Rated For 1,750 lbs. Each
    I have the Dexter Trailer Hub Assembly - 3,500 lbs Axles - 5 on 5-1/2, # 84555UC1, which is rated at 1,750 lbs. each. The bearings, races, cap and seal included. The only other option I would have is the Dexter Trailer Hub & Drum Assembly - 3,500 lbs. Axles - 5 on 5-1/2, # 84557UC3, if you were wanting brakes. The capacity is 1,750 lbs. and comes with a 10 inch X 2-1/4 inch drum. It also comes with bearings, races, cap and seal. The spindles that are available for both hub assemblies...
    view full answer...
  • What Axle Capacity Matches Spindle Diameter of 1.37 inch Where Inner Bearing Rides
    The inner bearing dimension on a spindle of 1.37 inch would indicate that the spindle is an 84 spindle like the # TRU24FR which would indicate that it's a 3,500 lb axle.
    view full answer...
  • Replacement Hub Needed for TruRyde #84 Trailer Spindle # TRU24FR
    You are correct, the Trailer Hub Assembly - 3,500 lbs Axles - 5 on 4-1/2, item # 84545BX, is compatible with the TruRyde #84 Trailer Spindle, item # TRU24FR. The Trailer Hub Assembly - 3,500 lbs Axles - 5 on 4-1/2 comes with innner and outer bearings, grease seal, lug nuts and grease cap for a complete replacement package.
    view full answer...
  • Recommended Spindles And Hubs For Trailer With 6 on 5-1/2 Inch Wheels
    The sizes you gave line up with Timken bearings and races, however they are not compatible with standard size hubs and spindles. I recommend changing out your spindles for more long term options and compatibility. This will require a professional welder, but is a better long term option to have standard spindles. You may want to consider changing out your spindles for #84 EZ Lube Spindles # TRU74FR or # TRU24FR. This will give you spindles compatible with no. 84 spindles. Then...
    view full answer...
  • Cause for Uneven Tire Tread Wear on One Tire of Tandem Axle Utility Trailer
    It sounds like your Haulmark 7 x 12-foot tandem axle enclosed utility trailer has a bent left rear spindle. This could occur from an impact with road debris or from hitting a curb with the trailer fully loaded. If both tires on the same axle showed equal wear on their inside edges then this would tend to indicate overloading of the axle, but since it is only one of the four wheels the problem is likely to be localized to that one spindle. If the spindle were to be bent upward then the...
    view full answer...
  • Determining Correct Replacement Axle For Older Axle With Obsolete L68149 LM12749 Bearing Combo
    I have a replacement axle option for you, but we do not have any hubs that will fit your spindle with the # L68149 and LM12749, and I was unable to find any replacements online. The best option is going to be replacing the axle with one that uses standard bearings to make finding replacement parts now and in the future easier. To do this you will need to take a few measurements, from hub face to hub face and and from spring center to spring center, and determine the axle weight rating. The...
    view full answer...
    Image 1 for Image 2 for
  • Is Redline Trailer # 84 Spindle a Fit for Dexter 8-247 Drums
    You are correct that the TruRyde #84 Spindle, like part # TRU24FR, which you reference, is a fit for your Dexter trailer hub and drum, part # 8-247-50. Please note the spindle has a 1750 lbs. capacity, so two spindles will give your axle a 3500 lbs. capacity. I would strongly recommend you take the axle to a qualified machine shop to have the appropriate welds done.
    view full answer...
  • Is There a #84 Spindle for 3,500 lb Trailer Axles That Comes With Brake Flange
    There is an option very, very similar to the #84 Spindle for 3,500 lb Trailer Axles - 2" Diameter # TRU24FR that includes a brake mounting flange, though not exactly the same. The difference is in the stub dimensions, as the aforementioned has a 2" diameter stub, and the option that comes with a brake flange has a 1-3/4" diameter stub: - #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR Apart from that, the difference is that this spindle...
    view full answer...
  • What Hubs Will Fit Redline 2-Inch x 4-Inch Round Spindle # TRU24FR
    The #84 spindle you reference, TruRyde # TRU24FR, is rated for use on 3500-lb axles. This spindle is compatible with both of the hubs you mentioned, parts # 84545BX, which is an idler hub; and # 84546UC3-EZ, which is a 10-inch drum brake hub intended for use with EZ-Lube spindles. The TruRyde spindle # TRU24FR is not an EZ-Lube spindle but it would still work with hub # 84546UC3-EZ. If you prefer a non-EZ-Lube version of this hub you can use part # 84546UC3. TruRyde does make an EZ-lube...
    view full answer...
  • Availability Of Replacement Trailer Hubs With L44649 and LM11949 Bearing Combination
    Based on the measurements you provided of your outer bearing you have the # LM11949 which is kind of an odd-ball bearing, and as such there are no hubs that we offer that use the # L44649 and # LM11949 bearing combination. You did not mention why you need to replace the hub, but assuming there is no excessive damage then your best bet is going to be replacing the bearings with # LM11949, and # L44649, and the races with # L44610 and # LM11910 to refurbish the hub. If it is damaged...
    view full answer...
    Image 1 for
  • Stainless Steel Kodiak Disc Brakes for 3,500 Pound # 84 Spindle
    A #84 spindle, like # TRU24FR , is a spindle for a 3,500 pound axle that has inner bearing # L68149 and outer bearing # L44649. The bearing kit that fits is # BK2-100. To replace your brakes and hubs you'll need the Kodiak Stainless Steel Brake Kit # K2R35S with hubs # KH84545S. You'll also need the bearing kit # BK2-100 that I mentioned earlier.
    view full answer...
    Image 1 for
  • Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
    You should still be able to use your spindle without having to replace anything, especially because this is not in the seating areas for the bearings. Regardless, I recommend cleaning off the spindle with emery cloth to try to remove as much of the rust as possible. You'll want to take care to make sure that there is no pitting on the spindle that might damage the new bearings, which would be the only case that I recommend replacing the spindles. If you do end up needing to replace your...
    view full answer...
  • Replacing 10x1-1/2 Inch Brake Assemblies with 10x2-1/4 Inch Brake Assemblies
    As long as your spindles are 4.75 inches from seal to threading like # TRU24FR or # TRU57FR they are compatible. I've attached a photo to assist. You will be able to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. We do not carry a hub that will fit the bearings you referenced. My recommendation is to change your axle or at least your spindle to allow you to use standard hubs like # AKHD-545-35-K. This will...
    view full answer...
    Image 1 for
  • How to Determine Fitment of the Trailer Idler Hub Assembly # AKIHUB-555-35-EZ-K
    The Trailer Idler Hub Assembly # AKIHUB-555-35-EZ-K is compatible with 3,500 lb trailer axles that use the #84 spindles like part # TRU24FR. You can determine if it will fit by pulling your hub and checking the bearings and grease seal that is on your current hub. This hub uses the inner bearing # L68149 and outer bearing # L44649 and it comes with a grease seal that has an inner diameter of 1.719". If your current hub uses the same then this is an exact replacement. If you can't find...
    view full answer...
    Image 1 for
  • Correct Spindle for Hub with L44610 and L68111 Races
    The numbers that you mentioned are actually for the races that pair with the inner and outer bearings in the trailer hub. The # L44610 race is commonly used with the # L68149 inner bearing while the # L68111 race is usually paired with the # L44649 outer bearing. If this is the case then you likely have a 3,500 pound hub like the Dexter # 84546UC3 that is compatible with a #84 spindle like the TruRyde #84 Spindle, part # TRU24FR. As long as you have a 2-3/8 inch round axle the correct...
    view full answer...
  • Replacement Spindle Compatible with Tie Down Engineering 46210 Hubs
    You have a standard 3500 lb axle, which uses a # 84 spindle compatible with a L68149 inner and an L44649 outer bearing. We offer a few replacement # 84 spindles with different stub diameters. • For an E-Z lube spindle with a brake flange and a 1-3/4 inch diameter stub, use # TRU74FR • For a standard spindle without the brake flange and a 2 inch diameter stub, use # TRU24FR
    view full answer...

Do you have a question about this Trailer Spindle?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer spindles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer spindle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.