Replacement Hub and Bearings for a 3.5K Axle On a Trail Star Boat Trailer
Updated 08/14/2024 | Published 08/11/2024
Products Featured in This Question
Question:
Hi - Im looking for replacement parts for my 3500lbs Trail star boat trailer that came with my Tracker/White River Marine Boat. According to spec sheet for the trailer with Tie Down Engineering super lube components: Gross Vehicle Weight: 3500lbs Bolt Pattern: 5 Lug On 4.5 Wheel Size: 14-inch Inner Bearing: 1 3/8inch L68149 Outer Bearing: 1 1/16inch L44649 Seal: 1.72inch Triple Lip Castle Nut: 1 inch Axle Beam/Spindle: 2.375x264inch 2 3/8 10inch Drum Brakes: Tie Down Engineering Free Backing Surge Brakes, Model 660E Actuator A few Questions: 1. What part number do you recommend for a equivalent replacement drum/hub assembly? 2. replacement spindle part number? 3. replacement free backing 10inch shoe kit Tie Down Engineering part number 81108 Thank you!
asked by: Chris B
Expert Reply:
Chris, so to start with your questions, you can use the Trailer Hub and Drum Assembly # AKHD-545-35-K as a replacement hub and drum assembly, and the #84 Spindle for 3,500-lb Trailer Axles # TRU24FR to replace your spindle, but we unfortunately do not have a replacement free backing kit.
But, we do have replacement bearings # L68149 & # L44649, along with the triple lip seal # DX49CR should you need those as well.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: clearance light grommet
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: Peterson LumenX LED Clearance and Side Marker Trailer Light - Submersible - Round - Red Lens
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Triple Lip Grease Seal Kit - DX49CR
- Search Results: trailer hubs and drums
- Search Results: accessories and parts
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: titan brake caliper
- Search Results: trailer brakes
- Q&A: Is Triple Lip Seal For 3,500 lb Axle Better Than Double Lip
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Video: Review of Bulldog Trailer Coupler Latch Spring - BD500354
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement For Dexter Caliper 089-008-02
- Q&A: Is The Dexter Triple Lip Grease Seal 010-11088 Available
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Bearing Kit Recommendation for 3,500 lb Dexter Axle
- Search Results: trailer spindles
- Search Results: national seals
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Q&A: Replacement Trailer Seal for 171255TC
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles