Bearings For 1-1/16" & 1-3/8" Inner Diameter & Seal With 1-3/4" Inner Diameter
Updated 04/05/2024 | Published 04/04/2024 >
Products Featured in This Question
Question:
Looking for bearings and grease seal or maybe just replace the entire hub assembly. Older utility trailer, unknown axle type. 5 x 4 1/2 pattern, inner bearing 1 3/8”. Outer bearing 1 1/16”. Seal is 1 3/4”. Guidance?
asked by: Joel P
Helpful Expert Reply:
Hi Joel; we have bearings and a seal with those measurements. For a bearing with a 1-1/16" (1.063") inner diameter what you need is Bearing # L44649.
Then for a bearing with a 1-3/8" (1.375") inner diameter the correct part is Bearing # LM48548.
There are a number of grease seals with a 1-3/4" (1.75") inner diameter though, and they all have different outer diameters so you are going to have to know what that is to get the right one. There isn't a hub we have or that I'm aware of which uses this combination of bearings and seals so a replacement for that won't be an option.
But for a grease seal with a 1.750" inner diameter and 2.565" outer diameter use the Timken # TMK29ZR. For a grease seal with a 1.750" inner diameter and 2.330" outer diameter use # 10-42. And for a grease seal with a 1.750" inner diameter and 2.772" outer diameter use # SL175.
If none of these work you'll have to replace the spindle with one that has the appropriate weight rating, such as the 3,500 lb # TRU24FR.
I have added a link below to our selection of spindles for you in case you have to go this route.
Product Page this Question was Asked From
Agricultural Grease Seal - Single Lip - I.D. 1.750" / O.D. 2.722" - 5K to 6K Axles - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.75 Inch I.D.
- 2.72 Inch O.D.
- 5000 lbs Axle
- 6000 lbs Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: 5 leaf trailer leaf springs
- Search Results: trailer leaf springs
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: Timken 204502 Grease Seal - Single Lip - I.D. 1.750" / O.D. 2.565" for 3,500-lb Axles
- Search Results: 175 inch id trailer bearings races seals caps
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Replacement Trailer Hub for 2018 Shorelandr SLR22L Boat Trailer
- Q&A: Replacement Hub Recommendation for Shorelandr Trailer with L44649 and L68149 Bearings
- Q&A: Recommended Hubs for 80's Shorelandr Boat Trailer with 5 Bolt Hubs and 8" Wheel
- Q&A: Replacement Parts for 2013 Shoreland'r Boat Trailer
- Q&A: Replacement Hub for a Shorelandr Boat Trailer LUV2314LW-03
- Q&A: How To Flip Square Trailer Axle For Ground Clearance
- Search Results: shorelandr

