Looking For Bearing Part Numbers For A Tapered Spindle
Updated 02/17/2026 | Published 06/16/2024
Products Featured in This Question
Question:
I need part numbers for inner and outer bearings and seal for a tapered spindle. Seal measurement is 2-1/8”. Inner bearing measurement is 1-3/4” and outer bearing measurement is 1-1/8”. Please help! This came off a boat trailer with a 6 lug pattern hub.
asked by: Hunter S
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Hunter, thanks for reaching out. We do have the # 25580 bearing which has a 1.750" ID. We do not offer a bearing with a 1-1/8" ID though, so it sounds like you are dealing with an uncommon size. Is there another hub on this trailer that still has the bearings? If so, I would pull the bearings and clean them up to see if you can read the number off of each one. Even then, a 1.125" ID bearing is not a common size, and bearings or hubs may prove hard to find. In this case I suggest replacing the spindle with something more standard, or replacing the axle entirely since installing spindles can be tricky.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Will The Kodiak Disc Brake Kit K2R35DKG Fit The etrailer Hub AKIHUB-545-35-G-K?
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Is A ST205/75R14 Tire The Modern Equivalent Of A F78-14ST Tire?
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Will A Spare Tire With A Higher Load Rating Be Ok On A 2022 Aluma 7814ST?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Spindle & Hub With 5 on 5-1/2 Bolt Pattern
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Article: Best Boat Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Tell the Weight Rating of a Trailer Axle
Jesse M.
2/17/2026
Hey Hunter, did you end up finding the bearing numbers on the other hub or decide to go with a new spindle or axle instead? Knowing what worked might help others dealing with the same uncommon bearing size.