How to Determine if Trailer Spindle is Bent
Published 08/18/2023
Question:
How can I determine a bent spindle on trailer wheel without out obvious sighting
asked by: John
Helpful Expert Reply:
One thing you can do is take a straight edge that is longer than your tire and lay it across the tire parallel with your trailer frame. Measure the distance from the frame to the straight edge in front and back of the tire. If the measurement is the same then your spindle is not bent. This is assuming your tires are in good shape and don't have any bulges.
Outside of that, the only way to find if it is bent is to take your trailer to a professional who can check your spindle alignment.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: steel fenders
- Search Results: trailer fenders
- Video: Complete Breakdown of the LED Trailer Clearance and Side Marker Light w/ Flange
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Shop: LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 72" Long - 2,000 lbs
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Spring Seat for Typical 3,500-lb, 2" Square Trailer Axles - Weld-On - Plain Steel
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: Spring Seat for Typical 3,500-lb Round Trailer Axles - Weld-On - Plain Steel
- Search Results: optronics trailer lights
- Q&A: Do all 3,500 lb Trailer Axles Have the Same Bearings
- Q&A: Should a Bent Trailer Spindle be Replaced or is it Safe to Reshape it
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Q&A: How To Determine Is Spindle Is Bent On My Torsion Axle
- Q&A: LED Tail Lights for a Ranger Trail XT188 Boat Trailer
- Q&A: Trailer Light Kit Recommendation for Ranger Boat Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
on Trailer Spindles
