Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter

See what our Experts say about this TruRyde Trailer Spindles

• Agricultural Hub Availability
  It sounds like you have an agricultural hub like the part # TRU54FR that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25 inches, the seal surface diameter 1.50 inches. The only hub we have to fit this hub would be the part # AH15450ECOMP.
  view full answer...
  
• Recommended Replacements for an Older Trailer Hub
  Having an inner bearing # LM48548 and outer bearing # LM11949 is definitely going to make things a bit difficult. I went through all the hub options we have available, but none will match your set up, unfortunately. That being said, we should be able to get replacement lugs for you. This will depend on the size needed, but the # 7-122 will be 2 inches long with a 1/2 diameter, the # K916WB25 will be 2 1/2 inches long with a 9/16 diameter, and the # 7-232 will be 2 3/4 inches long with...
  view full answer...
• Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
  The hub face of the # AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in the provided photo. The hub has a 1500 lb each/3000 lb per axle, and is designed for low speed applications. The bolt pattern is 4 on 5 (4 lugs on 5 inches, center to center). The hub includes the inner and outer bearings and races, the grease...
  view full answer...
  
• Replacement Hub for a 3/4 Inch Diameter Straight Spindle
  The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # TRU54FR. If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may...
  view full answer...
• Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
  From the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing. For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included. I linked the parts along with a few review videos for you to reference.
  view full answer...
• Replacement Trailer Hubs For Spindle That Uses 1-1/4" Inner Bearing and 3/4" Outer Bearing
  The Agricultural Trailer Hub Assembly # AH15450ECOMP is what you are looking for. It uses a Inner Bearing # LM67048 which has an inner diameter of 1.250" and an Outer Bearing # LM11949 with an inner diameter of .750". You can verify that the Grease Seal # SL150 with the inner diameter of 1.500" matches your spindle. I did notice that there is a lot of scratches on your spindle. If these are deep grooves that your fingernail will catch on you should replace your Spindles # TRU54FR so that...
  view full answer...
  
• Availability of Spindle with Spindle Diameters of .75 and 1.25 inches
  The agricultural spindle part # TRU54FR is a tapered spindle that has dimensions that go from .75 to 1.25 inch where the bearings would ride. This has a 1,500 lb capacity.
  view full answer...
• Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
  The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # TRU54FR. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
  view full answer...
  
• Replacement Axle Spindle With 2.25 Diameter Spindle
  Here is a list of the Agricultural Spindles we currently carry. Spindle # TRU34FR Spindle # TRU54FR Spindle # TRU67FR We also have the #42 Spindle # TRU57FR which has the 2.25" that may be what you are needing. This is a very common size that may have been used in a Agricultural application.
  view full answer...
• What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
  The spindle we show for the # LM67048 inner and # LM11949 outer bearing is the # TRU54FR Agricultural Spindle. We do not list the distance between the inner and outer bearing so I cannot verify that dimension for you. You can order the spindle, item # TRU54FR, using the link below if you like.
  view full answer...
• Spindle Identification on an Old Horse Trailer
  Based on the diameter of the spindle where the seal rides and the outer bearing dimension being .75 it sounds like you have the agricultural spindle # TRU54FR. Check out the chart in the product description that shows all of the dimensions of the spindle to verify this. You will need to use a dial caliper or micrometer to get an exact measurement. Only problem is that none of the hubs we offer that will fit this spindle are hub and drums nor have a 5 on 4-1/2 inch bolt pattern. If I am...
  view full answer...
• What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
  I pulled the Dexter Hub Assembly, # AH15450ECOMP, from the warehouse and made a simple diagram showing the outer dimensions for you to check out, see photo. This hub comes with the bearings, seal, grease cap and lug bolts. This hub fits spindle # TRU54FR. If you are not sure what spindle you have or if this hub will fit on your spindle, then you can compare the part numbers of your current bearings to those with this hub assembly or you can take a few measurements of your spindle. The...
  view full answer...
  
• Looking For Spindle With LM67048 Inner And LM11949 Outer Bearing
  Hello Brandon. Well, this isn't reddit, but we do offer one spindle that used the LM67048 (1.25" inner diameter) inner bearing and the LM11949 (0.75" inner diameter) outer bearing. Take a look at the Agricultural Spindle for 3,000-lb Trailer Axles # TRU54FR. The # DX22XR does use a different seal though, so in order to use the # TRU54FR spindle you will need the # SL150 seal as well. I have included detailed dimensions of the # TRU54FR spindle below for your reference.
  view full answer...
• Which Outer Bearing Mates with Inner Bearing LM67048 on a 4-Bolt Hub
  We have a 4-bolt hub that uses LM67048 as the inner bearing and an LM11949 bearing as the outer. That is the only hub/bearing configuration we have for an LM67048 inner bearing. It is typically a hub found in agricultural trailer applications. The hub is part # AH15450ECOMP if you want to take a look at it and see if it looks like your hub. I pulled one of the LM11949 bearings from our warehouse to measure. When measuring bearings, you really need to use a dial caliper. A tape measure...
  view full answer...
• Trailer Spindle & Hub With 5 on 5-1/2 Bolt Pattern
  While we have an option for you, the Agricultural Spindle # TRU54FR uses uncommon bearings, so there isn't a hub for it with a 5 on 5-1/2" bolt pattern, just the 4 on 5" Trailer Hub Assembly # AH15450ECOMP. What you can use instead is a more common #84 spindle, which does have a hub with a 5 on 5-1/2" bolt pattern available: - #84 Spindle for 3,500-lb Trailer Axles # TRU24FR - Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased # AKIHUB-555-35-K This will give you...
  view full answer...
• Replacement Hub Assembly for Tapered 3/4 spindle
  We do have one hub that will work with 3/4 inch spindle # TRU54FR, but this particular spindle measures larger than 1-1/16 inches towards the axle and does not work with the same bearings. The hub, # AH15450ECOMP, also has a 4 on 5 bolt pattern. The grease seal is also going to depend on the measurements of your spindle and we do not have any matching the dimensions you gave. We do have the correct replacement bearings # LM11949 with matching race # LM11910 and # L44649 with matching...
  view full answer...
• Hub Recommendation to fit Agricultural Spindle # TRU54FR
  Based on the spindle dimensions you listed it sounds like you have an agricultural spindle # TRU54FR and the only hub we carry designed to fit that would be the # AH15450ECOMP. There is no way to get a 2-48 hub to fit your spindle.
  view full answer...
• Trailer Hub Needed for Redline Agricultural Spindle
  If the Agricultural Spindle # TRU54FR looks like it will work well for your application then the only trailer hub assembly we have that is compatible is the Redline # AH15450ECOMP.
  view full answer...
• Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings
  It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads. Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern,...
  view full answer...
  
• What is the Overall Length of Agricultural Spindle # TRU54FR
  I pulled an Agricultural Spindle # TRU54FR that you referenced and measured the length of it and found it to be right at 10.5 inches long. I also grabbed bearings # LM67048 and # LM11949, slid them on the axle and measured the distance between the inner bearing and outer bearing from center to center and found that it is 2.33 inches. Check out the video I put together for you that shows this measurement.
  view full answer...
• Recommended Agricultural Hub w/ a 4 on 5 Bolt Pattern
  We have a couple of options for agricultural hubs that fit a spindle with an inner bearing size of 1.25" item # LM67048. I have listed them below: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 item # AH15450ECOMP. This hub matches your current bolt pattern. It fits a 1.25" item # LM67048 inner bearing and a item # LM11949 0.750" outer bearing. Dexter Trailer Idler Hub Assembly for 6,000-lb Axles Agricultural item # 42660UC1. This hub has a 6 on 6 bolt pattern and fits Inner bearing...
  view full answer...
• Replacing The Spindle On A Tandem Axle Boat Trailer
  Hi Randy, The spindles we offer are more for OEM use for companies that actually build axles and trailers and would honestly not be the best option for your situation. Welding on the spindle requires extreme precision so that everything is perfectly straight. Usually the welder will have to use a special jig to line the spindle up with the axle tube, which typically ends up costing more than just replacing the axle. If you know someone that would be capable of doing it for cheap that's...
  view full answer...

Do you have a question about this Trailer Spindle?