Idler Hub for Trailer Axle with 1-1/16 Inch and 3/4 Inch Tapered Spindle

Updated 04/02/2019 | Published 04/01/2019

Products Featured in This Question

#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter

(129)

$85.72

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs

(842)

$357.80

Question:

I am trying to find a replacement hub for tapered axle. 1 1/16 x 3/4. I know these are hard to find and not concerned about the bolt pattern as can purchase new rims and tires. Thanks

asked by: David W

Expert Reply:

I do have an option for you but we do not offer any trailer hubs with bearings that match the dimensions you provided. Therefore, we can either offer you a new spindle like the TruRyde Spindle part # TRU24FR or a new axle like the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765.

There is not a lot of room for error when replacing a spindle therefore unless you are an experienced welder then replacing the axle will be your best option. In order to recommend a replacement I would need to know what type of axle you have, if it is a leaf spring axle then what is your spring center and hub face measurements, and what is the weight capacity of the axle you have now.

For example, the above Dexter Trailer Axle Beam with E-Z Lube Spindles is a leaf spring axle with 3,500 lb capacity, 80" spring center, and 95" hub face measurement.

expert reply by: Conner L