Replacement spindle welds onto your 6,000-lb trailer axle. Works with AH60880FCOMP agricultural hub assembly. Castle nut, washer, and cotter pin included.
Features:
Specs:
Part Number | Capacity | A | B | C | D | E | F | Round/Square |
---|---|---|---|---|---|---|---|---|
TRU67FR | 3,000 lbs | 2.75" | 2.75" | 2.165" | 1.625" | 1.00" | 8.625" | Round |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to look at the two and three-quarter inch diameter Agricultural Spindle for 6,000 pound trailer axles. Now this is a tapered spindle that will replace a worn or damaged spindle on your trailer and it can also be used to build a custom axle. This is a weld on installation. It's a sturdy steel construction.
As you can see, it includes the castle nut, the washer and the cotter pin are all included. Again, the application for this is 6,000 pound round trailer axles. It is designed to work with the 60-A Agricultural Hub. We do sell that separately on our website. It's part number AH60880FCOMP.
Again, the stub diameter, which is this portion right here, if we put a ruler on it, it's going to be right at two and three-quarter inches in diameter.The spindle capacity is 3000 pounds, so when this is used with one on the other side, it'll meet the 6,000 pound axle capacity. Overall length of the spindle, from this edge all the way to this edge, right at 14 inches. Now the bearing races and the seals for this, the bearings they use, the inner bearing, which will go right in here is 506849. That is a 2.165 inner diameter. The outer bearing, which will go right here, is part number 501349.
That has an inner diameter of 1.625. The bearing races are also sold separately. The inner bearing race is part number 506810, outer bearing race is 501310. And then the grease seal, which will go on this section right here, which is the grease seal, which is sold separately, is part number SL275 and it has an inner diameter of 2.75 inches. Well, that should do it for the review on the two and three-quarter inch diameter, agricultural spindle for 6,000 pound trailer axles..
Do you have a question about this Trailer Spindle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.