Replacement BTR E-Z Lube spindle welds onto your 2,500-lb trailer axle. Works with L44649 inner and outer bearings. Grease zerk makes greasing fast and easy. Flange lets you attach a brake assembly.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there I'm Michael with etrailer.com. Today we're going to take a quick look at the replacement BTR E-Z Lube Spindle. This is going to either replace a damaged or broken E-Z Lube Spindle on your trailer, or if you're making your own custom axle, it can work on that as well. The E-Z lube fitting here provides the grease zerk that's going to allow you to grease your bearings easily. So that's a nice little feature there. You can see this does have the mounting flange here.
It's going to allow you to bolt on a brake assembly. It's got the four pre-drilled holes so that you can pass those bolts through easily. This is a weld-on installation, so you can see on the backside here, it's ready to be welded in place on your axle. This is a nice sturdy steel construction. So it should be pretty easy to weld there.
That stub diameter, it's right about one and five sixteenths or just over one and a quarter of an inch.Our overall measurement from end to end, looking at right about. Get this lined up for you. You can see it's just under seven inches. When I measured it a moment ago was able to find level portion here, measured at right about six and 11/16ths of an inch. A little under seven inches there.
As far as the bearings, races and grease seal that work with this, they are not included, but you can find them here at etrailer.com.Because this is a straight spindle, you'll notice that the inner bearing inner diameter and the outer bearing inner diameter are the same. And those numbers that you see there, the L44649, those should be on the bearings that you already have if you are replacing an old spindle. Just a second way of verifying that this is going to work for you. Overall, I think this is going to be a great option for those of you who are seeking a replacement spindle, or like I said, if you're creating a custom axle and you're wanting to add this on, I think this is going to be a great option for you. That's going to complete our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Do you have a question about this Trailer Spindle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.