Repairing a damaged 3,500-lb axle or building one with a lower stance? This hot-forged TruRyde spindle welds to 2" x 2" or 2" x 3" tubing, provides 1-3/4" to 4-3/4" of drop, and has a flange for compatible brakes.
If you're building a trailer with a lower axle setup, this drop spindle offers 1-3/4" to 4-3/4" of drop for a 3,500-lb axle. It welds to the flat surface of the leg of a 2" x 2" or 2" x 3" axle tube. The hot-forged, high-strength steel construction and machined spindle surfaces give a trailer fabricator a starting point for matching the axle and hub setup.
A damaged spindle doesn't always require replacing an entire axle. This weld-on spindle can be used in a properly evaluated axle repair, and its integrated flange accepts compatible trailer brakes. Match the hub, bearings, and other components to the published spindle dimensions before buying. Because accurate alignment and welding are critical on an axle, this is a job for a qualified axle fabrication shop.
| Dimension | Measurement |
|---|---|
| A | 2.03" |
| B | 4.75" |
| C | 1.00" |
| D | 2.25" |
| E | 1.26" |
| F | 0.91" |
| G | 2.38" |
| H | 3.34" |
| I | 4.12" |
| J | 1.72" |
| K | 1.376" |
| L | 1.062" |
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.