Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
(287 reviews)
Price: $58.55
In Stock
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
Item # AKIHUB-545-35-G-EZ-K
Our Price: $58.55
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (287)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-G-EZ-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- 1/2 Inch Stud
- etrailer
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
H-545-97 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube
Compare to Dexter 8-248-50UC1-EZ
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-35-G-EZ-K
Average Customer Rating: 4.7 out of 5 stars (287 Customer Reviews)
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.by: Glenn04/07/2024
The grease caps that came with the set does not fit the hub. It is bigger.
by: George 02/20/2024
I placed my order for hubs and bearing w Bay in customer service as I had a couple questions which she answered well. The package was shipped quickly. It arrived with one problem. I called Customer service and spoke with Kate who was very helpful and provided a solution and to replace a item. I was called later by Patrick the shipping lead who assured me the replacement was shipped and apologized for the error. Always excellent service at Etrailer. The only place i will shop for trailer parts.
by: Casey 03/11/2024
The team at etrailer helped me find the right parts for my trailer. They provided excellent customer service.
by: Paul 12/29/2023
I've had the hubs on for one year of use and they have performed perfectly. The price was good and delivery was timely. I'm very satisfied.
by: Joe05/11/2024
etrailer was very helpful. The hub that was sent turned out to be the wrong one for my trailer. A refund was promptly issued. The customer service was kind and helpful. I will definitely do business with etrailer again.
by: Michael 05/23/2024
Perfect replacement 1377
by: Lynes Special Delivery 09/20/2017
Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD
Lynes D.
9/20/2018
1 year - 35k miles Im still very happy with the set of idler and brake hubs, bearings are still rolling smooth. I only use 1 type of grease Lucas RedNTacky2, about every 1k miles pull the rubber plug, 1/2 pump of grease not too much or youll blow the seal! Most common problem people have! Ill be buying another set for the trailer Im building. Keep making people happy, Thankx LSD
by: Andrew 08/30/2023
I ordered on a Sunday to replace old 5x4.75 (uncommon size) hubs after discovering the new wheels and tires I ordered were 5x4.5 (common size) no I did not measure my old wheels. My old bearings were superseded by these bearings included in this kit. Assembly was a breeze. These were marked as shipped on SUNDAY! Thanks, you have my business.
by: Donald04/19/2020
Parts fit well and assembled easy, price was very fair. This is the 3rd time I've bought products from etrailer and have been pleased every time.
Thanks
Donald
4/22/2021
Good
by: Nick 05/24/2024
Everything showed up perfectly
by: James B04/05/2018
Thank you for your assistance with my purchase of new hubs for my boat trailer. They are exactly as described and they fit perfectly on my trailer. I am attaching a few photo's of the hubs installed. I would recommend your company to everyone who needs hubs........EXCELLENT SERVICE.
by: Robert 11/21/2023
Great product, arrived a day earlier than expected with the free shipping option. Will buy again from etrailer when it’s time to do it again.
by: Kevin04/12/2019
Ordered the hub and recipe it very quickly. They provided a video for reference on installation. It was very well made and easy to install. Very pleased with it, but the best part was the customer service. The old hub and bearings were so destroyed that I couldn’t get any numbers off of it. The lady from etrailer stayed on the phone and helped me research it until we found the right hub and bearings!!! In the end it was exactly what I needed and as happy as I am with the product, I’m more happy about the friendly and knowledgeable customer service they provided!!! Highly recommend the company and the products they sell!!!!
by: Check Bearing Sizes08/13/2023
The , order window for this product did not show the bearing sizes, and they shipped me the hub with wrong bearings, so I had to return it. Looking over the item description a 2nd time, It was difficult to locate the bearing sizes. That feature should be very visible for customers to find, so that they don't order the wrong size bearings.
by: Bill07/05/2023
The hub assemblies I bought worked fine for my trailer, thank you Martha O. I was a little disappointed that I didn't get American made products but overall the Chinese parts fit fine. The packing left a little to be desired, one dust cap was dented and I had to do some filing on it before I could hammer it in to place. One roller bearing casing was also dented a small amount but the bearing was still smooth so I went ahead with it. The parts did travel from Missouri to California and the box was pretty beat up. Maybe etrailer could double bag the parts? The box did get here in just a few days so they shipping was good. I would buy these parts again if I ever needed to.
by: Charles 04/01/2024
Delivery was pretty fast and they didn't mess up my order.
by: Dominick10/11/2023
Absolutely excellent service and parts
by: Ron 02/12/2024
Received what I needed when I needed it. Very competitive price.
by: Paul05/26/2023
No castle nuts or washers with this
by: Kevin 06/18/2023
I have always had good service with etrailer but this time it appeared my order was going to be two weeks out on delivery which would of hampered my vacation. I contacted Gwen at etrailer asking if she could look into the delayed shipment, she was very professional and extremely nice stating she would look into the product shipping early but there was no promises. I received my order two days later, hats off to Gwen for saving my vacation
by: David 02/27/2024
Everything went together very easily
by: Brian 03/15/2024
Great service fast delivery.will use again for sure.
by: 03/08/2024
Great value
by: Eddie 07/03/2023
Love all the products I have purchased from E traile BUT until E trailer starts shipping with fed X or a faster delivery company other than the United States Postal Service, which is very slow. It cost me a weekend of no boating and almost missed out on Fourth of July boating.
by: Robert 07/19/2023
Bought 2 of these as an emergency fix if needed. Product was as described and appears to be of good quality. Came with every piece pictured and was shipped quickly. Only time will tell and hopefully I won't have to use them.
25
287
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- How Come 3,500 lb Axle Trailer Hub Won't Work on Some Wheel SizesWheels that are smaller than 13 inch will not fit around the mounting flange of the trailer hub part # AKIHUB-545-35-G-EZ-K. Wheels larger than 15 inch in diameter do not have the correct bolt pattern for this hub. This hub has a 5 lug bolt pattern and 16 inch wheels have 6 and 8 lug bolt patterns.
view full answer... - Can You Switch From Hubs/Drums to Idler Hubs On a Boat Trailer with 3,500 Lb AxleIt is certainly possible to switch from hubs/drums to idler hubs on a trailer axle. For a boat trailer with 3,500 lb axle(s), the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-K or part # AKIHUB-545-35-G-EZ-K for EZ-Lube would be just what you need. There would be no need for a new spindle either.
view full answer... - Picking Out Replacement Hub for Trailer with 3,500 lb AxleThanks for all of the info and pictures! From that I can tell you do have a 3,500 lb axle/hub since the spindle dimensions match a number 84 spindle. So for a hub/drum the # AKHD-545-35-EZ-K would be what you'd want or for an idler hub you'd want the part # AKIHUB-545-35-G-EZ-K.
view full answer...
- Idler Hubs to Use on Timbren Axle Less Kit # ASR2000S02The Timbren Axle Less Kit part # ASR2000S02 that you referenced has 3,500 lb spindles so for an idler hub that fits you'd want the part # AKIHUB-545-35-G-EZ-K.
view full answer... - What Stub Axle Matches Up with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube AxlesThe Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K is designed for 3,500 lb axles. This could mean either leaf spring or torsion axles. It sounds like you might have a torsion axle and are looking for a replacement spindle. Unfortunately, this is no something we can help with and I suggest reaching out to the axle manufacturer. If you have a leaf spring axle and are looking for a replacement spindle, you can browse through the selection below based on...
view full answer... - 2006 Yacht Club Boat Trailer Hub Replacement RecommendationThe exact replacement for the hub you have is the part # 84545UC1-EZ. This will install on your spindle and has a 5 on 4-1/2 inch bolt pattern like you need as well.
view full answer... - What is the Lug Nut Size for My Utility Trailer with 3500-lbs AxleMost of the hubs/drums that we offer for 3500-lbs axles, like the # AKIHUB-545-35-G-EZ-K, have 1/2" lug studs and require 1/2" lug nuts like the CE Smith Trailer Wheel Lug Nut # CE11051. In order to find the correct replacement lug nuts for your hubs, I would recommend measuring the lug studs with a dial or digital calipers to make sure that you're getting the correct size.
view full answer... - Karavan Boat Trailer Replacement Hub with Bearings L68149/L44649Thanks for all of the info on your current hubs! That makes picking out new ones very easy. The etrailer hub part # AKIHUB-545-35-G-EZ-K that you referenced is a confirmed fit and would work great. It's also galvanized which helps prevent corrosion. I attached a review video and install video for this hub for you to check out as well.
view full answer... - Replacement Hub For UFP H-1377 on EZ Loader Boat TrailerHey Colby, thanks for the question, and we can get you the right replacement for the UFP H-1377 hub on your EZ Loader boat trailer. The right replacement for you is the following: - Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K This is a galvanized hub so it's perfect for a boat trailer and is the right fit for your spindle so you're all set.
view full answer... - Finding Correct Hubs For A Dual Axle Enclosed 8x16 Trailer With 3,500 lb AxlesHello again Patrick thanks for the pictures. Everything I can see indicates we are on the right track with the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized Item # AKIHUB-545-35-G-EZ-K being the correct hub. From the first picture we know it is indeed a 3,500 lb axle and it was made in 2010 (which is also a good sign). We also know that the grease cap flange diameter on the current hub is the same as that of the # AKIHUB-545-35-G-EZ-K hub at 1.99". Since...
view full answer... - Timbren Axle-Less Trailer Suspension For A 5x8 Northern Tool Aluminum Trailer I have the perfect solution for your 5x8 aluminum Northern Tool Trailer! I would recommend going with The Timbren Axle-Less Trailer Suspension System # ASR1200S04 because the 2,000 pound system is overkill. Using this system will give you 2 independent units that can eliminate the need for a thru axle. It will increase the ground clearance and fit any trailer width. The system has a heavy-duty steel construction that has a black powder coat that resists wear and corrosion. It is easy...
view full answer... - Replacement Hub Needed for a Karavan SL-3100-DB10-74 TrailerIf your weight capacity is 3,100 lbs then you probably have a 3,500 lb axle on your trailer. Since your trailer is a boat trailer I recommend going with a galvanized hub like part # AKIHUB-545-35-G-EZ-K for an EZ Lube hub or part # AKIHUB-545-35-G-K for a standard hub. Both of these hubs have an # L68149 inner bearing and an # L44649 outer bearing along with a grease seal that has a 1.719" inner bearing. If you can confirm that your current hub has these bearings/seal and utilizes a 5...
view full answer... - Do You Carry a 2,200LB Axle With 78" Hub Face Measurement? While we currently do not carry any axles with a 78" hub face measurement we do have the Timbren Axle-Less Trailer Suspension System # ASR1THDS02. This system bolts directly to your trailer frame and includes progressive springs which are a improvement over traditional leaf springs. The hub face will be positioned 8-1/2" off the frame rail of your trailer with this kit. If you choose to go this route you will need two larger 3,500LB Hubs # AKIHUB-545-35-G-EZ-K as it uses the larger spindle...
view full answer... - Disc Brake Kit to Replace TDE 43245 with Stainless Steel ComponentsBased on the part number you mentioned you have a 3,500 lb trailer axle so the disc brake replacement kit we offer with the most stainless steel components would be the Kodiak part # K2HR35DS which has stainless steel calipers and dacromet coated hub/rotors and mounting brackets. We do not have anything that's fully stainless at this time.
view full answer... - Can Galvanized Dexter 3,500 lb Hub 8-248-50 be Used on EZ Lube SpindleYes, the Kodiak Trailer Idler Hub Assembly # Q-HUB84545 that you referenced is perfectly compatible with EZ lube spindles. The only difference between the hubs that are EZ lube and non-EZ lube is the cap style. So for an EZ lube style cap that fits this hub you'd just need the part # DC200L-DCRP and you'd be set.
view full answer...
- Replacement Hub For Boat Trailer Using Bearings L68149 And L44649The closest we have is Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. This uses inner bearing L68149 (1.378" inner diameter) and outer bearing L44649 (1.063" inner diameter) that you currently have. It also has the outer race L44610 that you have. There is not a hub available that has the inner race L68110 that you have which measures 2.327". This kit includes inner race L68111 which measures 2.361". You can stick with your current...
view full answer... - Recommended Wheel And Tire Setup For 3,500Lb Trailer Idler Hub AKIHUB-545-35-G-EZ-KThe Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 # AKIHUB-545-35-G-EZ-K is designed to be used with wheels ranging from 13"-15". The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 # AM3H400 is 10" so it is not recommended to use these two together. The Trailer Idler Hub # AKIHUB-545-35-G-EZ-K will work with your current spindles. For a wheel/tire setup you could go with Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5...
view full answer... - Recommended Replacement Hubs For a 2020 Tracker TrailStar Boat TrailerFrom what I could find out about the Super Lube Spindles, they will be much the same as the Dexter EZ-Lube style spindles, like the # TRU74FR. This will include a zerk/grease fitting on the end that allows a grease gun to attach to. With that being said, I recommend going with the etrailer.com Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K. This will have a 5 on 4-1/2 bolt pattern and will match your bearings as well. One of the big pluses with this hub, though, is that...
view full answer... - Correct Replacement for TDE 46210 Trailer HubThere typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500 lb axle so you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for galvanized or part # AKIHUB-545-35-K for standard.
view full answer... - Recommended Hubs And Bearing Kit For A 2004 Triton UT128 Trailer.Thanks for the info. This is all 3,500 lb axle standard sizing we are dealing with. If you want a bearing kit you can use part # BK2-100. For a hub you can use part # AKIHUB-545-35-G-EZ-K. The hub does come with all of the bearings, seals, races, grease cap and lug nuts. We are not able to reference a VIN, but the information you provided is more than enough to tell us what parts you need.
view full answer... - Do the etrailer Hub Assemblies for 3,500 lb. Axles Work With Slip on RotorsThe studs on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K are 1-5/16" in length. This is generally a good length for this application. So as long as the slip on rotors you are using require a stud length shorter than that you will be in good shape.
view full answer... - Correct Replacement Idler Hub for Reliable SureLube 4,700 Lb AxleThe Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part # AKIHUB-545-35-G-EZ-K should work great on the Reliable SureLube 4,700 Lb Axle as the bearings are an exact match. The hub has a 5 on 4-1/2" lug pattern which is the most common and standard application so it should work well for you.
view full answer... - Can I Use 3,500 lb Hubs On My Trailer?Based on your measurements, it sounds like a 3,500 lb hub like the # AKIHUB-545-35-G-EZ-K will work on your trailer. This uses an # L68149 (1.378" or 1-3/8" inner diameter or) inner bearing and a # L44649 (1.063" or 1-1/16" inner diameter) outer bearing. Both of these bearings are very common and basically standard for 3,500 lb axles. It also uses the 5 on 4.5 bolt pattern which is also fairly standard. Generally we would like to confirm your bearing numbers just to be 100% sure, but it...
view full answer... - Boat Trailer Hub for my Trailmaster Boat Trailer.We can get you what you need unfortunately you will need to take some of the measurements to make sure you get the correct bearings and seals for your trailer. Trailer manufacturers use many different sizes when they build their systems and without precise measurements, we could not be 100 percent sure. Digital calipers are available at most tool supply stores. I have attached a drawing that shows where you can take the measurements. We would need to know the inner diameters of the inner...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Kathleen M
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
4/12/2024
I am sorry that these were not the right size. Let me get you over to customer service. They will be asking for your original grease seal numbers, please have those available when they reach out.