Can Galvanized Dexter 3,500 lb Hub 8-248-50 be Used on EZ Lube Spindle
Published 08/27/2019
Products Featured in This Question
Question:
Jameson - what about this one? AKIHUB-545-35-G-EZ-K It's not Dexter but is it a suitable replacement? Looks more like the one I am replacing. Existing hubs do not look like star/spokes. Doesn't the above include the Lubed dust cap & plug?
asked by: Michael M
Expert Reply:
Yes, the Kodiak Trailer Idler Hub Assembly # Q-HUB84545 that you referenced is perfectly compatible with EZ lube spindles. The only difference between the hubs that are EZ lube and non-EZ lube is the cap style.
So for an EZ lube style cap that fits this hub you'd just need the part # DC200L-DCRP and you'd be set.
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearings - DX86ER
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Replacement Trailer Hub With 5-Bolt Wheel Lug Pattern
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Search Results: 171255tc
- Search Results: ez lube caps
- Search Results: l44649
- Search Results: l68149
- Search Results: 1/2 lug nuts
- Search Results: timken bearing kit
- Search Results: 473336
- Q&A: What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
- Q&A: Recommended Hubs And Bearing Kit For A 2004 Triton UT128 Trailer.
- Q&A: Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat Trailer
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
Michael M.
8/27/2019
Jameson - what about this one? AKIHUB-545-35-G-EZ-K It's not Dexter but is it a suitable replacement? Looks more like the one I am replacing. Existing hubs do not look like star/spokes. Doesn't the above include the Lubed dust cap & plug?