Disc Brake Kit to Replace TDE 43245 with Stainless Steel Components
Updated 09/12/2022 | Published 09/11/2022
Products Featured in This Question
Question:
I have a TDE 46245 min-thk 850IN. What are the replacement options for Stainless Steel?
asked by: Wes P
0
Expert Reply:
Based on the part number you mentioned you have a 3,500 lb trailer axle so the disc brake replacement kit we offer with the most stainless steel components would be the Kodiak part # K2HR35DS which has stainless steel calipers and dacromet coated hub/rotors and mounting brackets. We do not have anything that's fully stainless at this time.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
- Q&A: Replacement Hub and Rotor Assembly with 5 on 4-1/2 Bolt Pattern for 3,500 Pound Trailer Axle
- Q&A: Can Kodiak Hub # KHR10D Replace Trailer Hub TDE 46245
- Q&A: How To Find Correct Replacement Disc Brake Pads for TDE 46245
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision