See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Will the Thule Hullavator Pro Fit on Yakima HD Bars
  Yes. The Thule Hullavator Pro # TH898 will fit on Yakima HD Crossbars like the # Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with the Thule One-Key System Lock Cylinders - Qty 2 # TH450200 to help keep the carrier and boats from walking away while you're out on the water.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Is the Yakima Bedrock HD System Compatible with Yakima Jetstream Bars
  I might have a solution for you, but the Yakima Bedrock HD System # Y01160-58 are only compatible with the Yakima HD bars like the # Y01157. The Yakima Bedrock HD, Overhaul HD # Y01151-58 and Outpost HD # Y01152-58 systems are all only compatible with Yakima HD bars and there are no adapters available for the footpacks on the HD systems to allow for the attachment of other styles of bars. If you can let me know what kind of truck you have, I might be able to locate a truck bed rack system...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will RhinoRack Batwing Awning Work with Yakima HD bars
  Yes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
  view full answer...
  
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?
  Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
  view full answer...
  
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Is Yakima MegaWarrior Cargo Basket Compatible With Yakima HD Crossbars
  You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080. The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064. As for the Yakima HD crossbars, they are available in a number of different sizes: 55 inches...
  view full answer...
• Using the Rhino-Rack Kayak Carrier with Yakima HD Crossbars
  The Rhino-Rack Crossbar Adapter, part # KC-FK8, is designed to fit the 2 Kayak Carrier, part # S512-S512X, into bars with a C-channel (or T-track). The Yakima HD Crossbars, part # Y01157, do have a T-track, so this adapter should work for you. I called Rhino-Rack, and they also stated that it should work. However, since this is not 100% confirmed, if you would rather go with a kayak carrier that is already designed to work with square bars like yours, we have that here. It's the Malone...
  view full answer...
• Is the Yakima Aero Crossbar SmarT-Slot Kit 2 Compatible w/ Yakima HD Crossbars and the FatCat EVO 4
  Yes, the Aero Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers # Y03098 will work with Yakima HD Crossbars Aero Crossbars # Y01157 and the Yakima FatCat EVO4 # Y03095. The SmarT-slot kit is designed to mount your FatCat EVO 4 to T-slotted crossbars, the Yakima HD Crossbars are T-slotted crossbars so this is exactly what you need.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Roof Rack System for 2026 Chrysler Pacifica
  Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
  Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
  view full answer...
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019
  That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL that Can Allow Thule Hullavator Carrier to Install
  The Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00226 that you referenced is a confirmed fit for your 2018 Jeep Wrangler JL and it by itself easily has capacity and bar length to carry two of the assisted Thule Hullavator roof racks part # TH898. You'll need to check to make sure the hardtop of your Jeep has the capacity for your two kayaks and the weight of each of the Hullavators as well which weighs right at 40 lbs.
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota Tacoma
  It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
  view full answer...
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Roof Rack System for 2026 Chrysler Pacifica
  Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
  Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Solution for Roof Rack for Honda Ridgeline and Leer Cap
  Hi Hunter; for your 2011 Honda Ridgeline you can use the Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars # Y79SB if you have a naked roof or the # Y67YD if you have factory raised rails. This will allow you to mount a bike rack like the # S64720 or # S64710 you were looking at. The same CoreBar crossbars can be mounted to tracks on the Leer cap using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. This will work with Yakima and Thule tracks if you already have them...
  view full answer...
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof?
  We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
  view full answer...
  
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• Recommended Roof Rack and Basket for A.R.E. Cap with Yakima Tracks
  For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use # Y00409 For 66 inch bars use # Y00410 For 78 inch bars use # Y00411 This will give you a complete roof rack system on your A.R.E. cap. Then for a cargo basket, I recommend taking a look at the Yakima MegaWarrior # Y07080. This is a really...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Roof Rack System for 2026 Chrysler Pacifica
  Hey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER Cap
  Hey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper Shell
  Since the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
  You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
  view full answer...
• Can I Use Yakima SkyLine Towers with Thule Tracks?
  Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks # THTP42 and Yakima Tracks # Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers # Y53TR with these tracks, you need the Yakima Landing Pad 1 # Y00221. This is the mount that fits directly into track systems and can be used with SkyLine or Control Towers.
  view full answer...
• Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
  I do have options for you but I don't have any information that the Dutchmen Coleman Rubicon comes equipped with a factory rack. That said, it would be pretty easy to add one using a kit like the Yakima Aero Bar Roof Rack for Camper Shells part # Y67CV. This kit installs via tracks which get bolted to the roof and then provides you with adjustable crossbars to secure your gear.
  view full answer...
• Will The Yakima Landing Pad 1 Y00221 Work With The HD Tracks Y84MR
  Good question, Ron! The Yakima Landing Pad 1 # Y00221 you have will indeed work with the Yakima 72" HD Tracks # Y84MR. With that said, the weight capacity will be lower than with the Landing Pad 26 # Y75ZR and HD Bar combo. It will only have a 165 lb. dynamic weight capacity for the 2-bar setup instead of the 220 lb. with LP 26 + HD Bar. As long as that weight capacity works for you, you are good to go! Speaking of which, what are you planning on using it for?
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Solution for Roof Rack for Honda Ridgeline and Leer Cap
  Hi Hunter; for your 2011 Honda Ridgeline you can use the Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars # Y79SB if you have a naked roof or the # Y67YD if you have factory raised rails. This will allow you to mount a bike rack like the # S64720 or # S64710 you were looking at. The same CoreBar crossbars can be mounted to tracks on the Leer cap using the SkyLine Towers # Y53TR and Landing Pad 1 # Y00221. This will work with Yakima and Thule tracks if you already have them...
  view full answer...
• Recommended Roof Rack For A 2007 Yukon XL 2500 For A Rooftop Tent And Awning
  Hi Tony, Roof rack manufacturers typically only test up to 165lbs for their crossbars unless it's a heavy-duty style crossbar. The bars themselves have a capacity but the roof of the Yukon is also going to have a capacity that you'll need to stay under as well so you'll want to first verify the capacity of the roof in your Yukon's owner's manual. Since you're wanting to do a rooftop tent you'll need to either have flush-mounted rails with fixed mounting points or raised rails that run...
  view full answer...
• High Capacity Roof Rack for 2003 Ford Excursion
  Hey Mike! The closest you're going to get to 300 lbs is the Rhino-Rack Heavy Duty Roof Rack # RR26BP. This has a capacity of 220 lbs. There are some options like the # Y35NB with higher crossbar capacity, but the towers limit you to the standard 165 lbs for the roof rack. You also need to make sure you don't exceed the capacity of the roof on your vehicle. What will you be carrying?
  view full answer...

Do you have a question about this Roof Rack?