To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Yakima BedRock HD Truck Bed Rack carries up to 300 lbs on-road and 180 lbs off-road, so it’s strong enough for kayaks, bikes, rooftop tents, or cargo baskets. Its low 7" tower height keeps gear within easy reach while still freeing up the truck bed for coolers, camping supplies, or tools. The 78" crossbars spread a minimum of 24" apart, giving a stable base for long or bulky loads while keeping everything balanced above the bed rails.
This rack isn’t just for smooth highways—it’s built and tested for off-road use and exceeds ISO standards. It’s designed to handle evasive maneuvers, swerves, bumps, and emergency stops without loosening or flexing. With a 180-lb off-road rating, it holds steady on rough terrain, making it dependable for overland trips or backcountry hauls.
The aluminum construction keeps weight down and resists rust, while the powder coat finish adds extra protection against corrosion. It’s made to handle rain, snow, and sun without wearing down. The finish also helps hide minor scuffs so the rack keeps looking clean even after years of use.
The towers clamp to your bed rails with quick-release levers—no drilling required. The system includes adapters for beds with factory utility tracks, so it’s easy to set up and remove when needed. Etched measurements on the crossbars help you center the rack, and the Same Key System lock cores secure the towers for peace of mind.
The 78" HD crossbars have top channels that accept Yakima channel-mount accessories, plus built-in tie-down points on the endcaps for straps or ropes. You can mount off-road lights, load stops, bike racks, kayak carriers, or a rooftop tent directly to the bars. Rubberized strips in the top channels cut down on wind noise and drag, keeping the ride quieter and smoother.
Ratings & Reviews
Have not installed, but a friend has these. Good quality.
4.5 the package boxes all came pretty damaged. Luckily everything in them was undamaged.
Great set of bars. Easy to set up. Ordered on a Wednesday after dinner and they were on my door step Friday when i got home from work. That is fast. Only reason for four stars is the bar came with an allen 5mm wrench that was supposed to fit all of the bolts but the end cap on the bars were 4mm. Not a big deal to me.
Service was Unbelievable. Fantastic , couldn’t get any better ther than someone driving a car from wentsville to my house. Thank you all, keep up the good work, I need more stuff.
Yakima products are renowned for their ease of assembly, installation, and sturdy craftsmanship. The BedRock HD does not disappoint in any of these categories.
We bought the BedRock HD Truck Bed Rack with the hope that it would make loading/hauling our kayak and SUP more user friendly when used in conjunction with the LongArm Extension. Another factor we considered when purchasing this combo was how securely the watercraft would ride for 10-12 hours of driving time. Though we have yet to make a trip of that length, both watercraft are extremely secure once loaded and strapped down. I am able to make the truck bed sway back and forth when pushing and pulling on the strapped down SUP. I’m confident both craft will be held securely for any duration we intend to drive.
Since the 2020 Toyota Tacoma with the 5 ft. bed is somewhat limited on bed space it was important for us to have a set up that would allow us to maximize our truck bed use. With the BedRock HD and LongArm combo we are able to accomplish our goal. There is 19” of clearance between the floor of the truck bed and the bottom of the HD crossbar with pad installed. Without a pad on the crossbar there is 20” of clearance. Plenty of room for our gear totes and cooler.
For those interested, I installed the forward-most crossbar/tower assemblies 17.75 inches rearward of the front outside corners of the bed. The rearward-most crossbar/tower assemblies are installed 14.25 inches forward of the rear outside corners of the bed (excluding the top of the tailgate). That gave me a center to center crossbar spread of 28”. The LongArm Extension is bolted with the tee bar at its shortest configuration, and the entire assembly is bolted one hole placement from the vertical position. [See attached photos]
Great product, strong and well made.
I've had these for over a year and absolutely love them. very good quality and fit. i would buy these again.
Well designed and works great
Etrailer got us our Yakima Rack way faster than we thought possible. Rack was in great shape!
Great product and great experience with vendor. Everything arrived faster than expected and in perfect condition. The product was as described and fit our truck. Very easy to install. We will be using the Bed Rack for an iKamper Mini we pick up next week.
They fit my F-150 perfectly. I didn’t have to drill or cut anything. The directions were easy to follow and only had to use two Allen keys to install.
The hidden T-Head that clamps under the bedrail is preventing the rack to be installed in the far rear of the bed of a Ram 1500 (I can’t speak for other trucks) due to divots Ram puts in the beds. Because I have to push the rear rack a little forward, it will create a tipping point for anything longer than 8’ long (Ram 1500 has a 5’5” interior bed length). The attached photographs is of a 6’ ladder, which fits perfect.
I received the racks , both packages, within two days after I ordered it. All the parts came inside the boxes with no missing parts. Appreciate how quickly it got to me! Really nice and simple purchasing process through etrailer! Will definitely get future items through them, specially the Yakima Overhaul HD rack that’s next on my list. I’ll post pictures after install.
Wasn't hard to install. Had it done in 20 minutes.
I don't normally do reviews, but I was extremely impressed with etrailer's Service. I ordered the Yakima BedrockHD for my truck on a Friday afternoon. It shipped the same Friday evening! In doing research on this rack, etrailers information was excellent and helped me confirm the bar size. Received the rack the following Wednesday, the rack was just as advertised, fit my 2020 GMC Sierra perfectly and now I can haul my Kayaks above the bed and access my tailgate. Great product, mounts to my bedrail solidly. etrailer was great, I will be using trailers in the future.
Exactly what I wanted for my F450
Easy to install and adds multi use of accessories while leaving your bed open for other options. Mainly I purchased for camping, allows me to store bike racks on top of the bar while allowing me to load the bed chairs coolers and firewood etc. my truck is a 2020 Toyota tundra with the 6 1/2 foot bed and factory truck bed rail system.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Todd
10/31/2022
Still working out great and withstands the weather while installed in the truck for most of the year in the Georgia heat.