bing tracking image
Q & A Icon

Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350  

Updated 01/23/2025 | Published 01/19/2025

Question:

CONNER, THIS WAS HELPFUL. I HAVE A 2019 F350 SUPERDUTY WITH THE PACE EDWARDS ELECTRONIC BEDLOCKER WITH THE EXPLORER RAILS. I PRESUME I CAN ORDER THAT SAME FIT KIT AND MOUNTING FEET YOU MENTION BUT I WOULD LIKE A DIFFERENT CROSS BAR. I WANT SOMETHING BLACK. WAS LOOKING AT THE WINGBAR EDGE OR WINGBAR EVO. WILL EITHER OF THESE WORK? NOT SURE WHAT SIZE TO GET. WILL YOU SEND ME A PART NUMBER FOR DIFFERENT CROSSBAR OPTIONS IN BLACK THAT WILL WORK WITH MY SET UP? WOULD LIKE TO ORDER TOMORROW SO QUICKER RESPONSE THE BETTER. MUCH APRPECIATED.

0

Expert Reply:

Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following:

-Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221

-SkyLine Towers for Yakima Crossbars # Y53TR

-Yakima CoreBar Crossbars - 70" # Y00423

OR

-Yakima CoreBar Crossbars - 80" # 8880656

I would go out and measure on your truck to see if 70" or 80" bars would be better before you make a decision.

expert reply by:
0
Robin H
Michael profile picture

Michael

1/19/2025

thanks robin I will go see if 70 or 80 is better.this setup will work on my explorer rails just to confirm.

Robin H. profile picture
Etrailer Expert

Robin H.

1/19/2025

@Michael yes, just like the Thule setup this will also fit the Explorer rails on your BedLocker.
Msl profile picture

Msl

1/22/2025

I ordered the 70 as the 80 stick out way past the truck. when I install these bars how far should they be spaced from one another? Using a Kuat grip 6 on them. will be loading kids skis (smallest) and adult skis (160-180)

Robin H. profile picture
Etrailer Expert

Robin H.

1/23/2025

@Msl since you're putting the rack on rails on your truck bed there is no specific spacing required. I would base it off of what you think would work well for the skis. The Kuat Grip doesn't have a requirement for crossbar spread either.

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>