Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling a full load, you need a hub and drum that can handle it. This Dexter trailer hub-and-drum assembly is rated for 5,200-lb axles and works with both electric and hydraulic brakes. The 12" diameter x 2" wide drum gives you dependable braking performance under weight, so you can tow with confidence every time.
Finding matching components for older or mixed-brand setups can be frustrating. This assembly uses the common 25580 inner bearing and LM67048 outer bearing, plus a 2-1/8" or 2-1/4" ID grease seal. That makes it a direct, predictable fit for many standard 5,200-lb spindles, whether you’re replacing a worn hub or swapping out an idler hub to add brakes.
Getting new hubs on should be the easy part of a brake job. With this Dexter design, the bearing races come pre-installed, so you can skip the press work and move straight to fitting your bearings and seals. Reviewers liked that they could bolt everything together quickly and get back on the road with no surprises.
Brake drums see a lot of heat and load cycling, but these genuine Dexter parts are built to take it. The drum’s 6 on 5-1/2" bolt pattern and 1/2" wheel studs give you a solid, secure mounting surface compatible with 14-1/2", 15", 16", and 16-1/2" trailer wheels. Smooth machining and a clean finish help ensure consistent braking and long-term reliability, mile after mile.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Dexter trailer hub and drum assembly for 5,200 pound axles which has a 6 on 5-1/2 inch bolt pattern. Now the application for this is 5,200 pound Dexter axles with spindles that'll require a 2-1/8 inch or 2-1/4 inch inside diameter grease seal. This is designed to work with both electric and hydraulic brakes. The drum dimension on this is 12 inches in diameter and 2 inches in width. The diameter would be measured inside to inside. So there's your 12 inches.
And then the 2 inches would be width right there. So 12 inches by 2 inches.Again the bolt pattern on this, let me spin it around, is a 6 lug 5-1/2 inch bolt pattern. This does require a bearing seal and a grease cap which we do sell separately. The bearings, it uses an inner bearing of 25580, that's the inner bearing part number. The outer bearing part number would be LM67048, a grease seal that you can use on this, you can use a 10-1 which is a single lip seal or a 10-10 which is a double lip seal.
And then the grease cap you would use on this is a, if you have a standard axle, it'd be an RG04-060 and if you had an EZ lube axle it'd be a RG04-080. And again the weight capacity on the single hub and drum assembly is 2,600 pounds so when this is used with one on the other side it would fit on a 5,200 pound axle.But that should do for the review on the Dexter trailer hub and drum assembly for 5,200 pound axles with the 6 on 5-1/2 inch bolt pattern.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Marcus
8/8/2022
A year later they are still working great. I have around 6,000 miles on them, and have great brake stopping power.