Which Replacement Hubs and Bearing Kit Fits Older Axle W/ LM67048 and 25580 Bearing Combination
Updated 10/04/2021 | Published 10/03/2021
Products Featured in This Question
Question:
I found this number 4T-LM67048 and 4t-25580 bearing. I need a seal but I cant find any number. The Spindles sizes are 1.25inch and 1.75. I will like to purchase the kits for six wheels . And get the price for the brakes. Thank you!
asked by: Anibal P
Expert Reply:
Thanks for the pictures and measurements!
Since your hub uses inner bearing # 25580 and outer bearing # LM67048 you will need to go with six of the Bearing Kit # BK3-310 if you are wanting to reuse your hubs, and if you are needing new hubs you will need the Dexter # 8-201-5 along with the above bearing kit.
This includes new bearings, races, cotter pin, tang washer, and grease seal # GS-2125DL which matches the dimensions in your picture.
Based on this bearing combination you have a 5200lb axle and should use brake assemblies # AKEBRK-7R-SA and # AKEBRK-7L-SA. These use a 5 bolt mounting pattern shown in the included diagram, so you will want to measure your mounting pattern to confirm this is correct.
I included a few videos of the products mentioned for you to take a look at.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement Bearings, Hub, and Brakes for Lippert 4,400 lb Axle
- Video: Checking Out the Dexter Trailer Idler Hub Assembly for 5,200-lb Axles
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Search Results: b12ea~22
- Search Results: lm67048
- Q&A: Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Left and Right Replacement Brake Assemblies For AXLETEK-12-GG Electric Trailer Brakes
- Q&A: Replacement Brakes and Hub Assemblies for Lippert 5,200 Pound Axle
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Westlake ST205/75R15 Trailer Tire with Glossy Black Eagle Aluminum Wheel - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Search Results: for 5200 lbs axles trailer hubs and drums
- Q&A: Replacement Brakes and Hubs For Axle-Tek 12-GG Axle
- Q&A: What Would Cause Grease to Appear All Over Trailer Wheels on 3 Trailers
- Search Results: hopkins 40975
- Search Results: buyers products
- Search Results: hopkins 41157
- Shop: Trailer Wiring
- Search Results: 10" brake shoes