Replacement Seal for a Dexter 8-201 Hub and Drum
Updated 04/28/2014 | Published 04/25/2014
Products Featured in This Question
Question:
I bought a used 2005 Nash 22M manufactured by Northwood camping trailer that has a Dexter 8-201 Drum assembly. I am repacking the bearings. The grease seal that I removed has the same inner and outer dimensions as the GS-2250DL, although the one I removed has a single lip with a long thin spring. There are no other identification marks on the Drum other than 8-201. Is the GS-2250DL the correct grease seal for my trailer? If not, how can I determine which one is correct for me? Thanks
asked by: Ray L
Expert Reply:
It sounds like the hub you have on your 2005 Nash 22M is the Dexter Trailer hub and drum part # 8-201-5. This hub has inner/outer bearings of 25580/ LM67048 respectively, and a seal of 10-1 for a single lip seal or a 10-10 for a double lip.
The correct and recommended seal part number you would need is the Grease Seal part # GS-212DL. You will see that the dimensions are very close to the # GS-2250DL that you referenced. Seals can be difficult to get dimensions on.
I attached a link to a bearing repacking and seal installation for you to check out also.
Product Page this Question was Asked From
Grease Seal GS-2250DL - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter axle brakes
- Search Results: race punch
- Search Results: dexter drum
- Search Results: dexter 8~201
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Video: Convert Your 5th Wheel to Gooseneck | MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Q&A: Replacement Brakes for Equipment Trailer With 5,200 lb Dexter Axles
- Video: Review of MORryde 5th Wheel Gooseneck Adapter - GooseTech 5th Wheel To Gooseneck Pin Box - MR87MV
- Shop: Timken Bearing Kit 15123/ 25580 Bearings, 15245/25520 Races, 412920 Seal
- Q&A: Replacement Hub/Drum and Brake Assemblies for 92865A
- Q&A: What Brakes and Bearings do I Need for My PJ Dump Trailer with Tandem 7K Axles?
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Q&A: Will 12" Dexter Electric Brakes w/4 and 5 Bolt Pattern # 23-105-106-09 Fit in Place of Hayes Brakes
- Q&A: Parts Needed to Install Replacement Leg for etrailer and Ram Hydraulic Jack Setup on Dump Trailer
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Q&A: Timken Replacement Bearing Kit for a Dexter 5,200 lbs Axle.
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Replacement L-Bracket for Equal-i-zer 6,000-lb to 14,000-lb Weight Distribution Systems - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Video: The Low-Down on the Replacement Race for 25580 Bearing
- Search Results: 67048
- Search Results: 8~201
- Search Results: 10 54 seal
- Shop: Gooseneck Hitch
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs