Replacement Hub and Drum Assembly For Older Drum Marked HD-1206
Updated 02/22/2024 | Published 05/17/2021
Products Featured in This Question
Question:
I have an ez load dual axle boat trailer that needs a new wheel hub and drum believe it is a dexter axle tapperd axle 51/2inch 6 bolt pattern 1/2inch bolt holes has bolts not lugs 12inch by 2 inch the number on the hub drum is hd 1206 I have been told this is an old part number not used any longer and need to know what replaces this hub and drum to order new with race bearings seal and cap thanks
asked by: Brian S
Expert Reply:
The HD-1206 number you found on your drum cross references to the Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 # 8-201-5 which is a 12" x 2" drum with the 6 on 5-1/2" bolt pattern you mentioned but has wheel studs instead of holes for wheel bolts.
The # 8-201-5 requires inner bearing # 25580, outer bearing # LM67048, grease seal # RG06-090, and grease cap # RG04-080 as these are not included.
I included a video of the # 8-201-5 for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 1/2 wheel stud
- Search Results: wheel stud
- Search Results: trailer brakes
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Q&A: Looking For New Brakes And Hubs For Trailer With Hub Number 8-201
- Shop: Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Search Results: lm67048
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Search Results: 25580
- Search Results: dexter hub assembly
- Search Results: wheel bearing grease
- Q&A: Recommended Brake Actuator Coupler for a 1986 EZ Loader Single Axle Boat Trailer w Hydraulic Brakes
- Q&A: Replacement Backing Plates and Brake Lines for an EZ Loader Boat Trailer
- Q&A: Replacement Drum and Disc Brake Kits for Tandem Axle Boat Trailer Used in Salt Water
- Video: Feature Review Hydraulic Brake Kit
- Q&A: Replacement Hubs and Electric Brakes for 2003 Airstream Classic Trailer
- Q&A: How do I Remove My Old Reliable HD-1206 Hubs so I can Replace them with New Ones?
- Shop: RV Roof Membrane
- Video: Feature Review Kodiak Synthetic Bearing Oil for Oil Bath Hubs
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Difference Between etrailer and Dexter Electric Brake Assemblies
- Video: A Closer Look at the Grease Seal
- Video: Feature Review Bearing Buddy Bearing Protectors-BB67SR
- Video: Hydraulic Brake Kit Feature Review
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
Ushaan
2/20/2024
Hello, I also have a tandem axle ez loader boat trailer with the same 6 on 5 1/2 drum but oil bath hub, with Reliable on the cap. the only number on the drum is HD-1206. im trying to find to find replacement hub, seals, cap, bearing and etc for spares. and more info as to how to service this setup. Thanks!