Replacement Bearings, Seals, and Lift Kit for Dexter Torflex #11 Axle

Question

Question:

Could you please help me identify the axle size for bearings, seals replacement. Also would like to get 2.5 inch ft. I have 2006 Airstream International 28ft. dual axle. Axle label says: 410875-09 Order#: 250867-1 Dex# 57642 Thanks for your help

asked by: Wladyslaw V

0

Expert Reply:

I reached out to Dexter and found that you have a Torflex #11 axle. The correct replacement bearings are # 25580 for the inner bearing and # LM67048 for the outer bearing. The grease seal is # GS-2250DL. If you end up needing to replace the hub and drum assembly, the correct replacement is the # 8-201-5.

The correct lift kit is the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift # K71-724-02. Although this is a little more than the 2-1/2" lift you were looking for this is the only option for the #11 Torflex.

I have attached some video reviews for your reference.

expert reply by: Robin H

0

Answer 1

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 2

Hey Jascha, yes you can easily change the Kodiak disc brake kit part #KOD53FR to being an oil bath setup by just swapping out the seal to the part #9103309. What's really interesting about the part #KOD53FR is that it actually has oil bath type…

view full answer...

Answer 3

Hello Travis, thanks for reaching out. We do have a grease seal that is very close to the dimensions you listed, although we don't have an exact match. Take a look at the following: - Grease Seal 29031 #29031 This is 3" OD, 1.875" ID…

view full answer...

Answer 4

The Kodiak Disc Brake Kit #K2HR10A11RERR is actually specifically designed to fit an AL-KO 10k #99 spindle, so this will be a perfect replacement. Though this does include the oil cap, it should be noted that it does not include the bearings or seal.…

view full answer...

Answer 5

Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?

view full answer...

Answer 6

Hello Roy, Looking to swap to disc brakes, you will not be disappointed. Pairing that with the Roadmaster Comfort Ride system makes a huge difference in both braking performance and overall ride quality, especially with a fifth wheel like your…

view full answer...

Answer 7

The most common bearings and seals for a 7,000 pound axle are #25580 inner bearing, #14125A outer bearing, #25520 inner race and #14276 outer race. The grease seal can vary, and will usually either be the #GS-2250DL, which has a 2.250 inch inner…

view full answer...

Answer 8

Hello Chris, Thanks so much for writing in and a double thank you for including the full brake assembly part number. That is incredibly helpful! Since you have the Kodiak Disc Brake Kit 11.35" Rotor #120 Spindle 12K ALKO #K2HR12A11-120DW, you…

view full answer...

Answer 9

Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…

view full answer...

Replacement Bearings, Seals, and Lift Kit for Dexter Torflex #11 Axle

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching