Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
It cannot; here is what B&W states regarding using the Companion in the slide position (which they call the "maneuvering" position): "The maneuvering position is only intended for parking maneuvers and not for…
view full answer...You cannot use a weight distribution system with a pintle hitch. You would need to remove the pintle hitch you have now in order to use a weight distribution system. Once you do this, I recommend using the Equal-i-zer Weight Distribution System…
view full answer...Yes, we do but unless you're using a weight distribution system you'll have to go with the 14" Gen-Y Hitch Hitch Extender for 2" Trailer Hitches item #GY89SR. It is the only one with a capacity high enough to support a 7,000 lbs…
view full answer...The #RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the #331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same…
view full answer...The V3 designation of the Redarc Tow Pro Elite part #RED44FR means that it's the most recent version of the brake controller. This is the third version and has been slightly updated. Functionally you wouldn't notice a difference aside from a…
view full answer...The Gen-Y Hitch Hitch Extender #GY89SR is far superior to the Curt Hitch Extender #C45795. The Gen-Y is made in the USA, comes with a lifetime warranty and as you pointed out has the higher 10,000lb trailer capacity with up to 500lbs of tongue…
view full answer...It sounds like you're needing the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 instead. This mounts at the side of the trailer body so you'll just need to make sure you have a solid structure piece to mount it to.
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…
view full answer...The pivoting bolt or pin that the Lock N Roll Coupler part #336TS504 has is made from a hardened steel that as rigorously tested for capacity and found to be capable of handling up to 11,000 lbs of trailer weight and also meets SAE J684 towing safety…
view full answer...For a hitch pin for the Lock N Roll Articulating Hitch w/ 3-Position Channel #336VS503505 I recommend the InfiniteRule Locking Pins for Lock N Roll Articulating Hitch for 2" Hitches - Qty 2 #IR59FR. This set of pins is specifically designed for…
view full answer...Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…
view full answer...This carrier was intended for use on trailers so it would be very unlikely it would be on your motorhome.
view full answer...Filter Your Search
Contact and Help