1. Hitch Adapters
  2. Gen-Y Hitch
  3. Hitch Reducer
  4. Fits 2-1/2 Inch Hitch
  5. No Extension
  6. 2-1/2 Inch to 2 Inch
Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long

Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long

lowest price pledge
Retail:$27.98
Our Price: $23.97
You Save: 14%
Hitch Adapters
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long No Extension 325-GH-007
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This reducer sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. Steel construction is durable. Call 800-298-1624 to order Gen-Y Hitch hitch adapters part number 325-GH-007 or order online at etrailer.com. Free expert support on all Gen-Y Hitch products. Guaranteed Lowest Price and Fastest Shipping for Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long. Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (8)
  • Q & A (10)
  • Videos (2)
  • Photos
  • Why etrailer?

Gen-Y Hitch Hitch Adapters

  • Hitch Reducer
  • Fits 2-1/2 Inch Hitch
  • No Extension
  • Gen-Y Hitch
  • 2-1/2 Inch to 2 Inch
  • Steel

This reducer sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. Steel construction is durable.


Features:

  • Adapter reduces a 2-1/2" x 2-1/2" hitch receiver to 2" x 2"
    • Lets you use a 2" ball mount or hitch-mounted accessory
  • Easy to use - slides directly into your hitch or onto the shank of your accessory
  • Durable steel construction
  • Zinc primer and epoxy powder coat resist corrosion
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Dimensions: 5-1/2" long x 2-1/2" wide
  • Pin hole diameter: 5/8"


GH-007 GenY Hitch Reducer Adapter - 2.5" to 2" - 5.5" Length

Item # 325-GH-007





Video of Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Gen-Y Hitch Hitch Adapters - Hitch Reducer - 325-GH-007 Review

Speaker 1: Today we're taking a look at the Gen Y Hitch Reducer Sleeve. Now this adaptor changes your two and a half inch receiver to a two inch receiver. So that way you can use your two inch hitch mount accessories inside of your two and a half inch trailer hitch.The unit is constructed of a sturdy steel construction and it features a black powder coated finish that's going to help it resist rust and corrosion. It's going to last and look good for a long time.Now a pin and clip or a hitch lock, those items are not included, so they will need to be provided separately. If you're in need of one, you can find them here at etrailer.com. This unit will accept a standard 5/8th diameter pin.

The product is made in the USA.A few measurements to go over with you real quick. Starting with the overall length, measures five and a half inches. From the center of the pin hole to this edge right here measures three inches. And from this edge to the center of the pin hole measures two and a half inches.That's going to do it for today's look at the Gen Y Hitch Reducer Sleeve.


Customer Reviews

Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long - 325-GH-007

Average Customer Rating:  4.6 out of 5 stars   (8 Customer Reviews)

This reducer sleeve lets you use 2" towing and hitch-mounted accessories with your 2-1/2" receiver. Adapter easily slides into your hitch receiver or onto the shank of your accessory. Steel construction is durable.

- 325-GH-007
by:

This reducer sleeve is quite nicely manufactured. I have absolutely no doubt that it will provide a mechanically safe and secure means to adapt my recently purchased adjustable 2" hitch unit with the rear 2.5" receiver on my 2019 F250 for use with any trailers that are at or under the specified load range. The only reasons that I gave it 4 stars vs 5 is that the interior isn't 100% covered with paint, as well as the fact that it doesn't fit really tightly inside the rear receiver of the F250. I hope this doesn't dissuade prospective purchasers from strongly considering this reducer sleeve for similar applications, as it's well manufactured and will most likely perform quite satisfactorily under any reasonable towing conditions.



- 325-GH-007
by:

I just received the item...that’s why it’s a four stars, haven’t had a chance to try it out yet...seems to fit fine, I’m sure it will work out just fine. If I have any issues I’ll sure to report it. E-Trailer has been a great place to buy for all my towing and trailer needs... I have had no complaints at this point in time...thanks.


Comments
Works as advertised...have had no issues, hauled loads of an excess of 13,000lbs. E-trailer is a great place for your trailer needs from products to great people.
Jon - 05/18/2020


- 325-GH-007
by:

Perfect fit for my 2019 Ford f250 with a 2 -1/2 inch receiver



- 325-GH-007
by:

great ! , worked for what i needed.



- 325-GH-007
by:



- 325-GH-007
by:



- 325-GH-007
by:

It looks solid and was delivered quick.



- 325-GH-007
by:

as ad said no complaints


9
9

Ask the Experts about this Gen-Y Hitch Hitch Adapters

  • Distance From Center Of Hitch Pin Hole To End Of Receiver On Gen-Y Hitch Reducer Sleeve
    The Gen-Y Hitch Reducer Sleeve part # 325-GH-007 measures 5-1/2" long overall. The distance from the center of the hitch pin hole to the end of the receiver tube is 2-1/2" on the short end and 3" on the long end. I have attached a review video for you that gives all three of these measurements as well.
    view full answer...
  • Recommended Trailer Hitch Reducer Sleeve for 2-1/2 Inch Receiver Opening and 2-1/2 Inch WD Shank
    For your new Dodge Ram 2500, the 2-1/2 inch Receiver can be reduced using the Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" # 325-GH-007 and is compatible with weight distribution systems. If you want a better fit for a weight distribution system, I recommend instead using the Curt Weight Distribution Shank for 2-1/2" Hitches # C17131. This will allow you to use your same weight distribution system and have the best connection to your 2-1/2 inch trailer hitch receiver. This will be compatible...
    view full answer...
  • American Flag Hitch Cover in a 2-1/2 Inch Hitch
    We actually only carry one htich cover for 2-1/2 hitch receivers, part # C22277, which obviously isn't an American Flag. Instead you can use a reducer like part # 325-GH-007 with a 2 inch cover witih an American flag, part # AMG102202.
    view full answer...
  • Replacement Weight Distribution Shank for 2-1/2-Inch Hitch on 2017 Ram Pickup
    We can help you with a solution to let you use your Husky Centerline 2-inch weight distribution hitch in your Ram's 2-1/2-inch receiver. There are two ways you can go. One solution is to install a hitch reducer sleeve in your Ram's 2-1/2-inch hitch, an item such as Reese # 58102, Curt # C45405 or Gen-Y # 325-GH-007. This will take up the slack inside the 2-1/2-inch receiver so that your 2-inch Husky shank fits properly. The other and better way to go is to replace the shank component...
    view full answer...
  • Steel Hitch Pin for 2-1/2 Inch Receiver and Steel Hitch Reducer
    There are steel hitch pins for your 2-1/2 inch trailer hitch but all of them have a zinc coating, such as the Gen-Y Hitch Pin and Clip for 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Long # 325-GH-099; as you mentioned, for a stainless steel pin you would need a lock, the Curt Hitch Lock - 2" and 2-1/2" Hitches - Stainless Steel # C23519. If you didn't want a lock because you didn't want to keep track of another key, there is the option of BOLT locks, which are made of stainless steel,...
    view full answer...
  • Weight Distribution Shank for 2-1/2 Inch Trailer Hitch Receiver with More Drop
    For your 2-1/2 inch trailer hitch receiver, the shank with the most drop is the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900. This will give you 2 inches more drop than the # EQ90-02-4800 you referenced. Depending on your system you may alternatively be able to use a shank like the Reese Weight Dist Shank - Drop Only - 11" Long - 7-5/8", 8-5/8" Drop # RP3344 with a sleeve reducer like # 325-GH-007. This is not ideal but in some cases can work depending...
    view full answer...
  • Cushioned Shank For Use With Equal-i-zer Weight Distribution System
    We do have an option for you, though there isn't a standalone cushioned ball mount like the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C45949-22516 that is compatible or rated for use with a weight distribution system. What you can use instead is a cushioned shank that is compatible with your Equal-i-zer weight distribution system; the Gen-Y Torsion Weight Distribution Shank will mount directly in your trailer hitch and you'll simply replace your Equal-i-zer's shank with...
    view full answer...
  • How to Transport a 300 lb Motorcycle While Towing an Airstream Trailer with a 2018 Ford F-350
    I have a solution for you to get your motorcycle and Airstream trailer to your destination but a typical dual adapter like part # MT70070 wont' do the job because these have a max tongue weight of 400 lbs and since your motorcycle weighs in at 300 lbs you need an alternative option. You could potentially use a beefier option like the Gen-Y Hitch # 325-GH-1724 with an adapter # 325-GH-007 for a motorcycle carrier like # MT70101 but you would have to find a creative way to load your motorcycle...
    view full answer...
  • Reducer Sleeve Compatible with 2-1/2 Inch Hitch Receiver and Fastway Self-Locking Ball Mount
    The Fastway Self-Locking, Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 6" Drop, 7" Rise # DTALBM6600-2S can be used with certain adapters and not others. The single hole sleeve reducers like # 58102 or # 325-GH-007 will not work because the ball mount won't have the pins long enough to secure to the receiver itself after connecting to the sleeve reducer. You will want the Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers # DTADP25-SS to...
    view full answer...
  • Solution to Provide 2 inch Hitch Opening at a 10 inch Drop that Fits 2.5 inch Hitch
    The best option for that would be the Gen-Y Adjustable Ball Mount part # 325-GH-625 with the sleeve adapter part # 325-GH-007 installed in the hitch opening you want to use as it would provide a 2 inch hitch size. There isn't a similar option that would work without a sleeve adapter.
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Chris R
Video by:
Chris R
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.