Result: hitch extension

Hey Tony, I really like the Torklift camper tie downs since they attach directly to the truck frame and provide a very strong and secure tie down location for the camper to attach to. The correct fit for your truck would be the part #TL22PR. Do you…

Hey Dave yes, the 22-1/2x49 Curt Cargo Carrier #C18113 is perfectly acceptable for your Mercedes-Benz Sprinter and will work great with a 2" class III trailer hitch. I'm not too sure what you plan on hauling, but you'll need to keep it…

Hi John; Blue Ox uses the chart below in the instructions for the Blue Ox Trailer Hitch Receiver #BLU95UR. Since this uses 1/2”-13 x 4-1/4” Hex Head Bolt, Grade 8 you need a torque wrench capable of 119 ft/lbs. A 1/2" Drive like #PTW3001C would…

Hey Ben! All of the hitch extenders like the Gen-Y item #GY89SR are going to reduce your hitch's capacity by 50% so I am not sure that's going to work with your Land Rover's towing capacity. So long as you are not using a ball mount with…

Your broken spring should be color coded to indict the weight rating of it. It'll be spray painted on the roller or the spring itself. I've listed the colors and their respective weights below; White: 10/110/210 LBS Green: 20/120/220 LBS…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

Hey Lyn, the correct Timbren kit for your 2013 GMC Sierra 2500 is the part #TGMRCK25D. This will offer you quite a bit of additional suspension support for your camper.

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

Yes, you can use the Blue Ox TrackPro Weight Distribution #BLU36FR with an extended shank, and for that I recommend the Equal-i-zer Weight Dist Shank #EQ90-02-4600 which measures 14" from the center of the hitch pin hole out to the adjustment…

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.