Curt Rebellion XD Shock Absorbing Adjustable Ball Mount Review C57UR Video

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

The Curt 45951 Rebellion Shock absorbing ball mount which we offer as part #C83WR would certainly reduce much of the shock and vibration that's experienced when towing a trailer which would absolutely make towing a more pleasant experience. Much…

The SumoSprings Solo Custom Helper Springs #SSR-127-54 has a maximum capacity of 2,800 pounds as opposed to the SumoSprings Rebel Custom Helper Springs #SSR-129-40-2 maximum capacity of 2,600 pounds. Also, the design is a bit different. Where the…

The TorkLift PowerArmor Solar Single Locking Battery Box #TLA7720RS has pre-cut holes at the bottom of the battery box, which you can use the included battery straps to loop through and around your battery, securing your battery.

I reached out to Timbren and they do not recommend using the Timbren Axle-Less Trailer Suspension System #TASR7KS01 for triple axle applications because of weight balancing. Although ideally it would work if the load was perfectly balanced, there are…

The big difference between the Sumosprings Rebel #SS64VR and Solo #SSR-312-54 is the 2-piece design of the Rebel vs. the single spring of the Solo. In some applications the 2-piece design does allow more suspension travel since they can separate and…

In short, using both Front SumoSprings #SSF-111-47 and Rear SumoSprings #SSR-127-47 suspension enhancement with your 2020 Ford F-250 is definitely recommended. Adding helper springs to the rear of your truck is always wise, and especially useful when…

I can absolutely help you as there are a lot of standalone options, but we do have exactly what you are looking for, which are the following: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount with 2" and 2-5/16" Balls #C57UR - Lock…

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

I have a solution for you. Unfortunately, I confirmed with my contact at Curt that the Step for Curt Adjustable Channel Ball Mounts - Anti-Skid Surface #C45909 is not compatible with Curt Rebellion XD Shock-Absorbing Adjustable Ball Mounts like part…

You can absolutely use a ST225/75R15 tire on a 15 inch rim with 5 on 4-1/2 bolt pattern. We actually have many options with this combination. I've attached a link to all of these options for you. One of the most popular options with our customers…