8-5/8" x 4-5/8" Rectangle. Incandescent RV light serves 4 functions: brake, tail, turn, and license plate light. Surface mount on 7" centers - hardware not included. 3-Wire pigtail. Built-in license plate bracket. White plastic base. Lowest Prices for the best trailer lights from Optronics. RV Tail Light - Stop, Tail, Turn, License Plate - Rectangle - Red Lens - Driver Side - White Base part number RVST51 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
summer hauling headquarters

Price: $5.82

RV Tail Light - Stop, Tail, Turn, License Plate - Rectangle - Red Lens - Driver Side - White Base

Item # RVST51

lowest price pledge

Our Price: $5.82

Orders above $99 qualify for free shipping


In Stock.
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light

Customer Photos

Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light
Optronics Trailer Light

  • Tail Lights
  • Rectangle
  • Incandescent Light
  • Red
  • Surface Mount
  • 8-1/2L x 4-1/2W Inch
  • Non-Submersible Lights
  • Optronics
  • Stop/Turn/Tail
  • License Plate
  • Rear Reflector

Optronics Trailer Lights - RVST51

8-5/8" x 4-5/8" Rectangle. Incandescent RV light serves 4 functions: brake, tail, turn, and license plate light. Surface mount on 7" centers - hardware not included. 3-Wire pigtail. Built-in license plate bracket. White plastic base.


  • Rectangular RV tail light serves 4 functions
    • Stop light
    • Tail light
    • Turn signal light
    • License plate light
  • White plastic base
  • Red acrylic lens snaps on and can be easily replaced
  • Replaceable incandescent bulb
  • Clear lens for license plate light
  • License plate mounting bracket is built in
  • Mounts on surface of trailer - hardware not included
  • 3-Wire pigtail
    • White wire for ground
    • Green wire for tail light
    • Black wire for stop/turn signal


  • Configuration: driver's side (left-hand side)
  • Light dimensions: 8-5/8" long x 4-5/8" tall x 2-1/16" deep
  • Height with license plate bracket: 6-5/16"
  • Mounting hole dimensions (center to center): 7"
  • Bulb type: 2057
  • Power draw at 12.8 volts:
    • Stop light: 2.4 amps
    • Tail light: 0.4 amps
  • 3-Year warranty

dimensions of light

Trailer light is a direct replacement for:

  • Wesbar 3622
  • Peterson 2534W

Light with RV50BK bracket attached

Light with RV50BK bracket attached

RV light is pictured above with RV50BK wedge base attached. Base is sold separately.

RV-ST51 Optronics Combination Incandescent Camper Taillight w/ License Plate Illuminator and Bracket - Left Side - Red Lens - White Base

Video of RV Tail Light - Stop, Tail, Turn, License Plate - Rectangle - Red Lens - Driver Side - White Base

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Optronics Trailer Lights RVST51 Review

Today we are going to review Part Number RVST51. This is the Optronics Camping Travel Trailer Stop, Turn and Tail Light with a License Plate Bracket. This is a multi-function stop, turn and tail light with a license plate light on the bottom and mounting tables for the license plate. This is a molded plastic housing and a durable lens which will provide all-weather protection against corrosion. This light does feature a replaceable snap on lens and an easy to replace bulb. The Bulb Number would be a 2057.

On the mounting bracket, it does use these four holes which are 7 inches on center. Center to center is 7 inches and this way would be 3-1/8. The wiring is a 3-wire system which would be a white wire for ground, the black wire for the tail lights and the green wire for the stop and turn signal. This tail light is weather and corrosion resistant. The overall length is 8-5/8 inches.

The width of just the light is 4-5/8 inches and the depth on the light is 2-1/16. Also, the measurement from the top of the light down to the end of the bracket measures 6-5/16 inches. One last measurement; the distance from the license plate bracket is the normal standard measurement but these holes are basically 7 inches on center. Now what I am going to do is hook it up to a power supply so we will be able to show you the brightness of the light. Basically we will do white for the ground and do black for the tail light.

There is the brightness for tail light. Then we will hook up the stop and turn and this will show you the stop and turn. Now what I am going to do is turn off the overhead lights to show you this is the tail light and that would be the stop and turn. That should do it for Part Number RVST51.

Customer Reviews

RV Tail Light - Stop, Tail, Turn, License Plate - Rectangle - Red Lens - Driver Side - White Base - RVST51

Average Customer Rating:  4.8 out of 5 stars   (497 Customer Reviews)

8-5/8" x 4-5/8" Rectangle. Incandescent RV light serves 4 functions: brake, tail, turn, and license plate light. Surface mount on 7" centers - hardware not included. 3-Wire pigtail. Built-in license plate bracket. White plastic base.

- RVST51

by: Robert H.07/25/2014

Right product, right price. Easy install, perfect fit. I got both left snd right tail lights, including shipping for less than a single light at Camper's Inn. The only suggestion I can make is they should include some form of soft gasket material to prevent water from getting behind the and possibly entering the hole in the trailer where the wires come through. I used a general purpose weather stripping putty for this purpose but a form fitting gasket would be a nice improvement. etrailer.com, I'll be Baaack. 142946


Hunky dory.

Robert H - 07/28/2015


- RVST51

by: cralls06/09/2014

Product showed up in a reasonable time frame and worked perfect. It wasn't the right size but that's because I was lazy and didn't take the time to go measure so that was my fault, not etrailer.com but I was able to just drill a couple holes where I needed them and mounted it anyway and it works great. Price was great as well, I'll definitely include etrailer.com in my list of places to shop and price check for my RV needs. 134791


Product is still working great, have had no issues with it : Definitely getting my moneys worth!

cralls - 06/09/2015


- RVST51

by: Matt G.05/10/2014

The new light arrived promptly, (about 3 days from order), and matched the original perfectly. The tag bracket is more robust than the original, which leads me to believe it will last even longer than the factory assembly. I would recommend this product as a replacement to anyone, but would also recommend etrailer.com for any other trailer accessory purchase. 129892


My replacement tag bracket is still holding up strong even with all the elements that the Southeastern climate has to offer.

Matt G - 05/13/2015


- RVST51

by: Mike C.12/15/2014

Received the light sooner then expected, Already installed; perfect replacement all holes lined up. Only had to cut wires on old light and installed plug-in connectors on new light and existing wire harness. Only wish the license plate brackets were steel instead of plastic. As always happier then a pig in mud with etrailer! Thanks for being there when I need anything!! 165530


EVERYTHING!! I have purchased in the past is working great, Lights, shackles

Mike C - 12/15/2015


- RVST51

by: Bob K08/01/2013

Light fixture exactly as advertised and screws aligned with Existing holes. Would have liked new mounting screws And new wiring connectors included but did ok with materials I had at home. Re-caulked all around fixture including joint between Slant mount on trailer and the flat mount tail light fixture. 92710


Product worked fine on trailer during our 3 weekTrip out east. Very happy w ith lite and was easy to install.

Bob K - 01/30/2015


- RVST51

by: Toby07/01/2015

I use an LED bulb instead of the supplied incandescent one. Nice unit and does the job very well and less expensively than a dedicated LED unit! License plate bracket fits a standard license plate so it's a breeze to use! 208671


Still working and looking good. A bright, red LED is faster acting and brighter than an incandescent bulb, improving the safety for our 1976 Apache Royal. License plate is still highly visible.

Toby - 07/05/2016


- RVST51

by: kdanie01/13/2015

Good basic tail lights. They easily replace other lights that have the same mounting screw spacing. Much cheaper than similar lights at local dealers. 168865


I bought them to install on a friends travel trailer that hadnt been used in nearly 7 years. They are working fine and they have been going out RVing with their boys for the past year and having a ball.

kdanie - 01/18/2016


- RVST51

by: Peter H.04/30/2014

The trailer lights were of very good quality, I like the sockets that the bulb goes into. They were an excellent price and was shipped to me super, super fast. I have ordered from here before and I am a Happy Customer. I can't install them yet as we are still winter here. Thank You. 128275



Peter H - 04/30/2015


- RVST51

by: Mike H04/29/2013

What can I say... these lights are "replacements" and not the OEM lights, but they are higher quality and better looking than the originals. Etrailer shipped them right out... they were shipped out the day I ordered them and on my doorstep 2 days later. When I took the originals off, I noticed they were in place by rivets, and I was nervous about drilling them out of my ABS trailer. However, it was no problem at all, and I'm so glad I took on this project. I replaced 11 lights and both brake lights, and it has given my 1996 trailer a much needed facelift. The old lights were tired, and the bases were black. The new lights have white bases and they they are MUCH brighter and more vibrant. The lenses fit snug. Oh, and the price was incredible. Great transaction. 78422

- RVST51

by: Roy C04/29/2014

This item is an OEM replacement, the same item originally used. I could not be more pleased to have found it at etrailer.com. Installation was easy. I will look to etrailer first in the future for replacement items. 128074


Still like new, working great....

Roy C - 04/29/2015


- RVST51

by: Gary04/22/2013

easier to install then I thought it would be 77206


got it right the first time, easiest lights I ever put in. Matched right up and actually enjoyed doing the work. No shopping around, right product the first time. Would definitely buy from you again

GaryW. - 04/22/2014


- RVST51

by: Jim of G burg10/09/2014

This is an exact replacement for my broken light. Old light was taken to task when lifting cover off of trailer and it was caught in the license plate. Tugging on it was a disaster, broke both tabs for license. 155315



Jim o - 10/09/2015


- RVST51

by: Jeff S10/26/2015

Fit perfect Great videos help with proper installation. Price very reasonable. Will be buying my trailer needs here Thanks 230847


Works great. It was easy to install and well pleased. Thanks

Jeff S - 11/01/2016


- RVST51

by: K noble07/04/2013

Exactly like the ones on my 97 camper! Smooth install and freaky fast shipping! Etrailer is my go-to place for my trailering needs! 87726


Still bright and no fading on the lens. Camp on!

K n - 07/04/2014


- RVST51

by: LaDona04/22/2013

thank you so much, our replacement light was an exact match! quick and easy to switch out with the old one too. 77352


worked perfect. easy swap from the old light. Thank you

LaDona W - 04/23/2014


- RVST51

by: Karen R.07/02/2014

My husband broke the original tail light license plate bracket on our travel trailer when he hastily yanked the cover off this Spring and the license plate got caught up in it. I can't believe I was able to find this replacement part on your web site so easily -- exactly the same part as the original! Ordering was a breeze and the part arrived right on time. We successfully replaced this in just a few minutes, tested the brake lights and blinker, and it works like a charm! I'm thinking of buying a spare in case he breaks it again next year. I will definitely do more shopping on this site -- we are completely satisfied with our purchase. Thank you! 138662

- RVST51

by: Ray A.11/02/2012

good products good service good price good everything 58719


working good after one year,,! good pricing fast delivery..would buy from you again,,!

Ray - 05/03/2014


- RVST51

by: Lisa D05/13/2014

Just like the one I had to replace. Very easy to replace. 130423


Its still working great!

Lisa D - 05/13/2015


- RVST51

by: Mike Palmer04/14/2017

I bought a pair of these to replace originals on my 1981 Nomad trailer. First mistake, I bought a pair instead of one left and one right. I called up support and spoke with Ian, a most excellent gentleman, who corrected my error and followed up with me. What awesome service. As far as the lights go, I cut off the old ones which were not working and simply wire nutted the new ones in place and wallah, I now have new trailer lights that work and I paid less for the two of these lights then I would have paid for one lens replacement cover on my old cheapo lights. 369506

- RVST51

by: Doug S.09/22/2015

Good quality replacement products 226999


Still working as it should

Doug S - 09/21/2016


- RVST51

by: Jason S.06/13/2011

After working on the old lights on my camper numerous times just prior to leaving on a trip and while traveling, I decided it was time to replace all of the lights. I purchased two new tail/brake lights, and four new side markers. The total price including shipping was just over $28 (I should have done this a long time ago). The lights arrived within 3 days of being ordered, and I was able to install them fairly quickly. I am so happy that I now have all six lights working perfectly, and shouldn't have to worry about them for a long time 16915

- RVST51

by: Joseph F.09/20/2014

This is a replacement piece for my Palomino Pony pop up camper. The original worked, but the silly plastic lic. Plate holder cracked up from Sun exposure and wasn't secure anymore. This is of the same design, although not exactly the same lense. I bought the other side just so they'd match. Seem to be as good as the original. I didn't give it the best rating just because I don't think much of the original design. This will no doubt have the same problem in the future. Transaction was easy and parts were as ordered. 152274

- RVST51

by: Joel D.08/11/2012

This product is exactly as presented. I installed this product on my Flagstaff Pop-up camper and it worked perfectly. The mounting holes and wire colors were an axact patch to replace the original equipment. The price was about 50% of the originals and is a superior product in my opinion. I removed the cover lens and applied a coat of chrome metallic paint to the lamp mounting surface and this gave a reflective and produced a brighter glow. This is a small improvement to a near perfect product. 51354

- RVST51

by: Bill OD12/03/2016

I chose these lights to use in addition to the set already installed on the trailer. They have an advantage in the construction of plastic, no rusting, long bulb life, and larger face exposure for better visibility. I am very happy with these lights and even happier with the folks at ETRAILER. My shopping experience was flawless, simple online ordering process, quick order processing, timely shipping, and protective packing. All of my trailer needs will continue to be directed to ETRAILER. 321877

- RVST51

by: ZaBigD07/11/2015

I replaced the tail lights on my travel trailer with the Optronics Trailer Lights - RVST50 & RVST51 for half the price of other name brand lights. The installation was easy and the lights worked great. They are bright and easy to see, both day and night. My only complaint is that the lens cover may be a little too tight of a fit. I was afraid I was going to crack the lens pressing it onto the base but it snapped into place without any problem. I suppose that is a good thing after all. 211029

- RVST51

by: Jay L08/10/2017

Okay for the price,works well. The only complaint is the plastic base is flimsy,when you tighten the screws it tends to draw the plastic ears in. This causes them not to be flush when you pop the lenses on, my concern is hopefully they are holding the cover on tight enough,would hate to loose one going down the road. I played with the screws letting up on them trying to find a happy medium,but still couldn't get the white tabs to fit flush to the outside of the lens. Shipping was fast. 418698

- RVST51

by: Gunny04/26/2011

Very prompt service, excellent shipping and communication from the sales team. I ordered multiple items at once and the staff bundled them all in one shipment and had them shipped the same day I ordered. Each product was exactly what I needed and as research will show, they have the best prices on the web. Couple that with free shipping and it's impossible to not recommend this company to all. Thanks etrailer staff!! Semper Fidelis Gunnery Sergeant Scoggin United States Marine Corps 12373

- RVST51

by: Brad06/02/2015

Replaced old original tail lights on 91 Dutchmen TT. Much brighter and I don't have to hit the lights before each trip to make them work. Easy to install, the only problem I had was these mounting hole didn't match up with original holes so I had to seal old holes and make new ones. Didn't come with directions so you'll need to remember or label the wires as they come off old lights. one draw back is the license plate holder is plastic, not sure how it will hold up over time. 200027

- RVST51

by: MJE08/28/2015

First, the price is amazing. I was thrilled to find a pair of lights for such a low price. Especially lights that will put me back on the "right side" of the law. (My tags were not illuminated) The lights came very quickly and the tracking information was very specific. I had a quick install question and was on and off the phone with Vince in less than five minutes. I am glad I found etrailer. The service and prices are great. Best, MJE 222333

- RVST51

by: Pete S.04/26/2013

I purchased these two lights as replacements for the unit on my pop-up Viking camper. Excellent product for the price. Delivery was much faster than I had expected. The only possible fault I can imagine is that the wiring leaves the body on the left side of the lamp assembly where, of course, my camper has the hole on the left. The wires are just (barely) long enough to be routed and enter my camper. One inch more would have been great. 78040

- RVST51

by: Tony K.06/07/2013

Perfect match for one of a pair on our camping trailer.. Excellent quality at a great price. Also excellent and rapid service from etrailer.com. Perfect match for one of a pair on our camping trailer at a great price. Excellent quality. Also excellent and very rapid service from etrailer.com. perfect match for one of a pair on our camping trailer 83729

- RVST51

by: Phil N.08/11/2014

This is my first time ordering from etrailer.com. I am extremely pleased. The item I purchased was generic (could have gotten oem at double the price from same vendor) and it fits and works perfect. Heck, I think it is more solid than the original one. Extremely fast and reasonably priced shipping. I highly recommend this vendor and I will return. Bottom line, extremely pleased, highly recommended! THANKS!! 145848

- RVST51

by: Tim06/24/2013

I have a 1999 coachman 5th wheel and somehow the tail light license plate holder became broke i did not think i would find the same one but i did and for a great price. Installed and working fine 85873

- RVST51

by: Bill Adams03/22/2017

I found etrailer online while looking for a replacement lens for a taillight on my camper. Their website was easy to navigate, making it easy to find the part I needed. Called to place my order and the staff was friendly, knowledgeable and professional. Price was very good and the part arrived in three days. If you need a part for your trailer or camper, I highly recommend using these guys. 357202

- RVST51

by: Paul J08/14/2014

I was searching for some replacement tail lights for my vintage 76' Scotty Sportsman, these turned out to be a perfect fit (size) They do feel alittle fragile especially the license plate posts, but they seem to be more than tough enough once installed. I will definitely be using E-Trailer again for future purchases. My next project is to replace the teardrop running lights on top. 146728

- RVST51

by: Jaymac02/25/2016

Place my order one day and received two days later!!! The perfect OEM match for my RV. I do wish the manufacturer would fix this problem by replacing these plastic clip with metal clips. These tabs don't last, but I guess that is how they make their money. Can't blame etrailer.com for that!! They are the best!!! And the price was right!! Thanks etrailer.com!!!!!! 238676

- RVST51

by: Ralph L.08/26/2013

The license plate holder was exactly the right fit and replaced the original perfectly. Because it is new and my other lens is 14 years older the red color is brighter. I'll be ordering another replacement for the other side to make them match. I couldn't be more pleased with the whole process from etrailer - it was easy ordering and everything came in a timely manner! 96985

- RVST51

by: Dawn K12/27/2014

After we lost a lens on our OEM lights on our Rockwood Mini Lite, I bought a set of new lights, this item and the matching one for the other side. They are a bit larger than the OEM lamps. They were easy to install and fit well in the same space as the OEM. My husband said the camper wire colors didn't match up exactly but it was easy for him to figure out. 167062

- RVST51

by: Tom04/15/2013

There was a question on what size these tail lights really were that was listed on the website. I had called customer services, and verifed which was the correct size, customer services was courteous, and efficient. I was really please on the prices of these tail lights, and how fast I recieved them, not to mention how easily they were to replace on my RV. 75974

- RVST51

by: Billy03/05/2016

I have used etrailer for several years now, and have no complaints, product that is received, is exactly as advertised. Parts are packaged well and delivered without any delays. If I have any questions, their customer service is always available with plenty of knowledgeable, and helpful service. I will continue to use their service In the future. 239713

- RVST51

by: krb2405/29/2015

The RVST51 travel trailer stop, turn and tail light with license plate light and bracket is an exact match to the old one, so it works out great for me as a replacement. I couldn't be more pleased with how well etrailer responded to by request. I will be sure to do business with etrailer in the future as I have other needs for my travel trailer. 198532

- RVST51

by: John M.01/02/2017

The picture shown is the one I ordered and received. Ordering, shipping and receiving were pleasant and timely. Only I would have appreciated it if I had been notified in advance that this would be delivered by US Mail (from UPS). Although the tracking map showed where it was located, it was not delivered as quickly as UPS would have done. 329353

- RVST51

by: Ron12/01/2015

After long rode trip, placed our travel trailer in storage unit only to recheck on it to find some knuckhead had broken our left back light. Checked on the internet using the numbers from the right light and found replacements at etrailer.com. Ordered new lights and received within a week. The price is right and the service is spot on. 232791

- RVST51

by: Dave S07/15/2017

I could not be happier with my first experience purchasing merchandise from etrailer.com. The information provided in the FAQs led me the exact items I needed. They parts arrived in just a few days, installed easily and fit perfectly. etrailer will be the first place I shop for trailer parts from now on. Can't beat the price either. 406931

- RVST51

by: Linda08/04/2016

We recently purchased a 16 yr old travel trailer. The tail lights were working but the plastic holder behind the left tail light, is also the mount for the license plate. It needed replacing. etrailer had the exact part and shipped immediately. Installed and ready to roll. Great company to do business with. Linda from Georgia 279606

- RVST51

by: Rick in KS05/25/2015

This tail lamp assembly perfectly replaced one that had rusted out on our Forest River pop-up camper. Installation took about 15 minutes. The price for this item is very reasonable, and shipping was quite speedy. This tail lamp was part of my first order ever with etrailer. I will definitely do business with etrailer again. 196747

- RVST51

by: RMG03/16/2015

Installed two new taillights on my pop up camper after an incident broke one and was very pleased with the fit and look of these lights. Also the installation was very easy making the whole transaction very successful. I would do a picture but camper back in the garage because winter in western NY. is not quite over. 178560

- RVST51

by: Chuck B.08/12/2014

Exactly like the ones on my RV from the factory! So... Very easy to install! Good quality & fast delivery! Great Company to deal with! Seems like they are right on top of all my orders.... Will recomend to friends & will buy from them again for sure! Wish all Internet Businesses were this easy to deal with! 146227

- RVST51

by: Darnell03/13/2017

Have a 1985 Jayco popup camper. Got caught in a hailstorm which took out the tail lights among other things. Original tail lights no longer manufactured. Didn't think they would fit but thought they could be jury rigged. To my surprise they didn't fit perfect but went in very well. I give it an A. 356011

- RVST51

by: Dennis H06/22/2015

This replaced a damaged taillight/license plate assembly on our Jayco tent trailer. The quality matches the old one at an amazing price. Installation was simple; mounting holes matched, wire colors were the same. I had to supply silicon caulk and reuse the old mounting screws. I'm pleased. 206495

Show More Reviews

Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Light?

  • How to Wire the Left Rear Camper Tail Light # RVST51
  • When wiring the # RVST51 Tail light with license plate light, you should only have one wire going to the turn/stop signal connection and one wire going to the taillight connection on each side of the trailer. The Left side turn/stop wire on the trailer is yellow, Right side turn/stop wire is green, taillight wire is brown. On the left side you should connect the yellow wire from your trailer lighting to the green wire on the # RVST51 tail light, and connect the brown wire from the...
    view full answer...

  • Replacement Taillight Assemblies with SAE-AILRST-94 DOT Markings on Lenses
  • It sounds like you're needing a Bargman 92/94 series taillight. The DOT number you provided usually doesn't steer us to a replacement lamp, the actual part number of your lamps should be printed or stamped on the lamp housings themselves, not the lens. However, this particular one has come up enough that we had record of it. For the driver's side (assuming you need the license plate bracket), use part # 30-92-003 and part # 30-92-001 for the passenger side. If your existing lamps have...
    view full answer...

  • Replacement Trailer Tail Light Lens with SAE-AIST OPTRONICS On it
  • The SAE-AIST indicates the rating of the lens and is not a part number. Lens # AST51B is a replacement for light # RVST51. This light measures 8-5/8 inches across, 4-5/8 inches tall. If these dimensions match your light then lens # AST51B is likely the correct replacement.
    view full answer...

  • Replacement Lens for Camping Travel Trailer Stop, Turn and Tail Light # RVST51
  • For a replacement lens for tail light # RVST51, you will need to use # AST51B. You can see current pricing by clicking on the link to the lens I have provided.
    view full answer...

  • How to Find a Trailer VIN
  • Typically trailer VINs have letters in them so most likely the number you found would not be the VIN. Usually commercial trailer manufacturers will indicate the unique vehicle identification number (VIN) on the same plaque that carries their brand name, model number information and the trailer specifications. The model number of the trailer is not the same as the VIN number; the same model number may be used on multiple trailers but a VIN number is unique and individual to each one produced. If...
    view full answer...

  • Replacement Trailer Lights to Replace Reflect-O-Lite 910-950
  • From my research the Reflect-O-Light 910-950 is an 8-5/8 by 4-5/8 inch light. For a replacement we have the Optronics # RVST51 for the left side and # RVST50 for the right. The driver's side does have the license plate light included. Unfortunately, we do not have any lights of that measurement that are LED.
    view full answer...

  • How to Wire Replacement Trailer Tail Light # RVST51 on 2005 Aliner Camper with 4-Wire Hookup
  • My research of Aliner campers indicates their tail light assemblies appear to be flush-mount rectangular units roughly 4-inches tall x 8-inches wide. We offer a flush-mount light from Optronics, part # RVST50, that is similar to the bracket-mount unit you referenced, part # RVST51. Both lights have a 3-wire hookup, the same dimensions at 8-5/8 long x 4-5/8 wide x 2-1/16 deep, both are weather and corrosion resistant and both have replaceable bulbs and lenses. The wiring arrangement...
    view full answer...

  • Need Replacement Tail Light Lens for 1999 Jayco Eagle 12so
  • It is possible that Wesbar Red Lens Kit for Wrap Around Tail Light, # 105825-26, will work on your 1999 Jayco Eagle 12, but that will depend on the type of tail lights it currently has. Some also used standard tail lights. The best way to find replacement lights is by using the part number of the current lights. Wesbar stamps the part numbers on the base of the light assemblies. Look at the base of both lights and look for a part number. Keep in mind, the SAE number is not a part number. If...
    view full answer...

  • How to Find a Replacement Lens for a 1990 Coleman Newport Pop Up Trailer Tail Light
  • To identify which taillight lens will match your housing you will need to look at the taillight itself and get a model number from it or look at the lens on the opposite side of the trailer to obtain a model number from it. The camper model really does not help much for the taillights. When ordering, remember that the left side may be different from the right side, as left usually has a clear bottom lens for license plate illumination. If you cannot find a lens and would like a whole...
    view full answer...

  • Need Replacement Tail Light Lens for Reflect-O-Lite 310-350 on 1968 Serro Scotty Trailer
  • 1968 Serro Scotty trailers came in various sizes and models (the Gaucho in 13- and 15-foot versions; the Highlander and the Sportsman). Based on the photos I found, both round and rectangular light assemblies were used, but since you reference the Optronics rectangular trailer lights # RVST50 and # RVST51 I take it yours are this shape. I contacted Serro Scotty to try to locate either an exact replacement lens or details about the appropriate size replacement, but they were not able...
    view full answer...

  • How to Remove Optronics Tail Lamp Assembly Part # RVST51 From Coleman Santa Fe Pop-Up
  • To remove the lamp assembly, you would first remove the lens by gently prying at each side. Once the lens is removed, you should be able to easily access the 4 screws holding the lamp base to the camper. Take a look at the photo I edited for you.
    view full answer...

  • Can Optronics Light # MC32AB Be Installed on Trailer that Grounds Lights Through Mounting Hardware
  • Sounds like you bought the # MC32AB and the # MC32RB to replace what you have on your trailer. This is the only style of light we offer in that size. It sounds like your trailer may ground it's light assemblies through the mounting hardware. Which in this case would mean that you would only need to run the ground wire of this light to the mounting hardware.
    view full answer...

  • Availability of a Replacement License Plate Mounting Bracket for Trailer Tail Light # RVST51
  • Since the license plate mounting tabs are part of the entire housing on light # RVST51, you will have to replace the entire light. The good news is this particular light is relatively inexpensive.
    view full answer...

  • Differences Between Optronics # RVST51 and Bargman # 30-92-003 Trailer Taillight Assemblies
  • You're correct, other than the fact that the lamps come with bulbs that are slightly different (but interchangeable) and the # RVST51 is 1-3/4 inches taller, both lamps would install in the same manner. The running light filament of the 1157 bulb used by the Bargman # 30-92-003 lamp is just a few watts brighter. If you're replacing existing lamps on a camper, I'd choose the lamps that most closely match the size of the original lamps. The Optronics # RVST51 measures 8-5/8 wide x 6-5/16...
    view full answer...

  • Replacement Tail and Marker Lights for 1983 Rockwood Pop-Up Camper
  • Thank you for providing detailed information about your Rockwood camper's tail and marker lights that need replacement. We do have one tail light that exactly matches your 8-5/8- x 4-5/8-inch dimensions, part # RVST51 from Optronics. This non-submersible surface-mount incandescent fixture has a 3-wire pigtail wiring scheme (white is ground; black is tail and green is stop/turn). The white bracket mounts on 7" centers. I was not able to find definitive information on the Stratolite...
    view full answer...

  • Need Replacement Tail Lights for a 1999 Jayco Eagle 12so
  • It is possible that the Optronics Camping Travel Trailer Tail Light, # RVST51, will work on your 1999 Jayco Eagle 12, but that will depend on the type of tail lights it currently has. Some of them also used a wrap-around style lights. The best way to find replacement lights is by using the part number of the current lights. Wesbar stamps the part numbers on the base of the light assemblies, so we can start there. Look at the base of both lights and look for a part number. Keep in mind,...
    view full answer...

  • Recommended Replacement Tail Lights For 1999 Jayco Qwest Pop-Up Trailer
  • I pulled one of the tail lights from our warehouse that might work well for you. I recommend the Optronics Camping Travel Trailer Stop, Turn and Tail Light, part # RVST50. This light measures 4-1/2 x 8-1/2 inches. The mounting holes are 7 inches apart horizontally and 3 inches apart vertically. Although the mounting holes are not exact, this may work for you. This is a 3-wire incandescent light, and is designed for the passenger side of the trailer. For the driver side you would...
    view full answer...

  • What are the Differences Between Optronics # RVST51 and Bargman # 30-92-003 Tail Lights
  • The plastic brackets on the Optronics # RVST51 and Bargman # 30-92-003, # 30-92-108 turn and tail lights will be the same plastic grade. The red or white bracket will be the same molded plastic for either of the products. As I mentioned in the video the products are exactly the same in quality. The only difference is the brand name and cost difference. I have attached a couple videos as well as trailer lighting requirements for you.
    view full answer...

  • Replacement Taillights for 2001 Jayco Kiwi Camper
  • I have a solution to give your Kiwi functioning taillights again, but unfortunately there is not a replacement lens for the taillights on your 2001 Jayco Kiwi camper. As you noted, the replacement lenses you found are similar, but they are not the correct replacement. During the time your trailer was made, Wesbar made the wraparound taillights specially for Jayco. Unfortunately, the replacement lenses are no longer available from Wesbar for these taillights. The best solution is...
    view full answer...

  • LED and Incandescent Trailer Tail Lights with License Plate Bracket
  • For an LED trailer tail light with license plate bracket we have # RVSTL61 and # RVSTLB61. For incandescent we have the following: # RVST51 # 30-92-003 # RVST56 # 30-92-108 # 30-92-004 # 30-92-109 # RVST61 # RVSTB61
    view full answer...

  • Replacement Tail Light for 1998 Jayco Travel Trailer
  • Trailer manufacturers do not often maintain original parts information (or availability) for items such as lights, but we can certainly help you find a suitable replacement. You may want to just install a whole new light kit like # TL29BK or a high-efficiency LED kit # TLL9RK. This will avoid the same problem of no replacement part if the other light on your trailer should be damaged. Both kits include lights, a license plate bracket and all hardware. If you prefer to replace just...
    view full answer...

  • Replacement Lens for Reflect-O-Lite 501 Trailer Bathroom Light
  • It looks like Reflect-O-Lite is no longer around. I did find that there is a Bargman replacement, 34-17-511, but I cannot find it in their system. I did find someone selling one online via a Google search. Or if you want to replace it with something that won't burn through its lens you can use # ILL24CB. I have included a link to all of the interior light options we offer to the right.
    view full answer...

  • Replacement Trailer Taillights to Replace Peterson M457 on a 2005 Clamshell Trailer
  • We don't have the exact style you are looking for, but the part # RVST51 and # RVST50 would be a very similar replacement. We don't carry the Peterson M457 style taillights, but these are very similar with the only real difference being the shape of the lens.
    view full answer...

  • How to Install Optronics RV Tail Lights RVST50 and RVST51
  • The Optronics RV Tail Lights # RVST50 and # RVST51 are both 3-wire designs that have a white ground wire, a green wire for the tail/running lights and a black wire for the stop/turn light signals. Installation is shown in the linked video. Both lights use replacement bulb # A2057B. Since trailer wire colors are not always consistent, the best way to know how to connect the lights to any given trailer is to test the trailer wiring with a circuit tester like # 3808. You can also use a...
    view full answer...

  • Availability of Rear Light Lens for Clipper 17BH Camper
  • I took a look at your Clipper 17BH online and it looks like it takes a light similar to our Camping Travel Trailer Stop, Turn and Tail Light # RVST51. If so the replacement lens is # AST51B. You may want to take some measurements to be doubly sure. The lens measures 8-5/8 inches wide by 4-5/8 inches tall. (see photo.)
    view full answer...

  • Differences Between Bargman # 30-92-003 and Optronics # RVST51 Camper Trailer Taillights
  • You're correct, other than the fact that the lamps come with bulbs that are slightly different (but interchangeable) and the # RVST51 is 1-3/4 inches taller, both lamps would install in the same manner. The running light filament of the 1157 bulb used by the Bargman # 30-92-003 lamp is just a few watts brighter. If you're replacing existing lamps on a camper, I'd choose the lamps that most closely match the size of the original lamps. The Optronics # RVST51 measures 8-5/8 wide x...
    view full answer...

  • Recommendation for an LED Trailer Tail Light
  • There is a LED light system that will work for you, but the Camping Travel Trailer Stop, Turn and Tail Light, part # RVST51, does not come in a LED version. What I would recommend you get is the Miro-Flex, Waterproof, Rectangular, LED Trailer Stop/Turn/Tail Light, part # STL35RB. It is similar in shape and performs the same light functions. It does not have the license plate bracket that part # RVST51 does though. You will also need to cut a hole in the trailer to install the Grommet...
    view full answer...

  • Replacement Tail Lights for a 2006 Forest River 5th Wheel Travel Trailer
  • The light in your pictures seems to be a # RVST50, wider at the bottom, little tabs on the sides holding the lens on. If your existing light is approximately 8-5/8" long x 4-5/8" tall then it will fit. The version with the license plate bracket is # RVST51 like you said. I think you have found the lights you need!
    view full answer...

  • Compatibility of Optronics Lamp Part # RVST51 with 1995 235G Viking Pop Up Camper
  • I do not have any information about which OEM lights came on that camper. We do, however provide a full drawing of the lamp itself on the product description that shows the dimensions of the lamp and the center to center distance between the plate mounting holes. I have also provided a photo of the lamp showing these dimensions. Simply measure the existing lamp to see if the Optronics Camping Travel Trailer Lamp shares the same dimensions.
    view full answer...

  • Replacement Trailer Lens for Taillight part # RVST51
  • Could you send in a picture of the light on the other side that you still have so I can see what you need? If it looks like the part # RVST51 (which is very popular on Jayco popups), the part # AST51B would be the correct replacement lens.
    view full answer...

Do you have a question about this Trailer Light?

  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Michael H
Installed by:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Updated by:
Adele M
Video Edited:
Andrew L
Expert Research:
Adam R
Updated by:
Laura H
Expert Research:
Jeffrey L
Updated by:
Amy B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.