Lug Nut Torque Chart for Trailer Wheels
Question:
CAN YOU GIVE ME LUG NUT TORQUE FOR MY DEXTER 16,000 LB AIR BRAKE AXLES? THE NUTS ARE 1-5/16 IT LOOKS LIKE THEY HAVE A BUILT IN ROUNDED WASHER? I HAVE A PICTURE OF THE AXLE END AND THE LUG NUT IF THAT WOULD HELP.
asked by: PETE P
0
Expert Reply:
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
click to enlarge
expert reply by: Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Similar Expert Q&A Pages
- Recommended Trailer Brake Assembly for Flexride BD75450
- Electric Brakes for 10 Inch Wheels
- Parts Needed to Install Trailer Brakes on a 2,200 lb Dexter Axle
- Can Electric Trailer Brakes be Used with Hydraulic Brake Hub and Drums
- Adding Electric Brakes to a Trailer with Inner and Outer Bearing L44649 and 13 Inch Wheels
- Replacing Dexter Idler Hub 008-258-05 with Hub and Drum Assembly # 8-257-5UC3
- How To measure a Spindle to Determine the Correct Grease Seal
- Lug Nut Torque for Higher Capacity Trailer Axles
- Trailer Brake Parts for a 2,200 lb. Dexter Axle
- What are the Lug Nut Torque Specs on a Dexter 13x4.5 Vintage Trailer Wheel
- Torque Rating for Spindle Nut on Trailer Hubs
- Adding Brakes to 1994 Coleman Pioneer Chesapeake Pop-Up Camper
- Torque Specs for Trailer Wheel Lug Nuts
- Grease Seal Inner Dimension that Comes with Trailer Hub 8-257-5UC3
- What Is The Minimum Wheel Size for a 7 Inch Hub/Drum
- Trailer Brake Replacement Solution for Dexter #9 Axle
- Lug Nut Torque for 13 Inch Trailer Wheels on a 2014 KZ Sportsman Classic
- Lug Nut Torque for 16 Inch 8-lug Wheels
- Replacement 7 inch Dexter Hub for 2004 Fleetwood Yuma with Hubs 8-257
- Recommended Brake Hub and Drum To Replace AL-KO 363216
- Replacement Grease Seal Number for Dexter 8-257 Drum Hub
- What is the Correct Torque Specification for Trailer Wheel
- Recommended Torque Values for Lug Nut on 1/2-Inch Wheel Stud with Steel Wheel
- How Tight Should Lug Nuts of Trailer with 15 inch Steel Wheel Be
- How Tight Should Spindle Nut Be on Trailer Axle
- How to Pick Out Replacement Hub for an Old Horse Trailer
- Recommended Lug Nut Torque Specs on 6,000 Pound Trailer Axle with 1/2 Inch Studs
- Do Dexter Trailer Hub and Drum Assembly for 2,000 lb Axles Fit Same Wheel Sizes
- Is Dexter Hub and Drum Assembly 8-257 Available