Trailer Lights - Peterson

7-11/16" x 3-5/8" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts AMP connector.

4-3/4" x 4-1/2" Square. Incandescent trailer light kit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount with included hardware. 20' Harness. PC rated.

4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.

14-1/4" x 1-3/16" x 1-1/16". Waterproof identification light bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.

3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.

Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.

5-3/8" x 4-5/8" Square. Waterproof, LED lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers over 80". Stud mount with included hardware. 25' Harness.

8-5/8" x 3-1/4" x 1-15/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.

1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable chrome-plated steel housing. Easy, snap-in installation. 2-Wire pigtail.

7" x 2-3/4" LED trailer tail light with chrome bezel functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Hard-wired design with stripped leads. Surface mount. 12 Volt.

4-1/8" Round. Incandescent trailer light functions as a stop, tail, and turn signal light. Durable black plastic housing and snap-on lens. Pedestal mount with included stud. 2-Wire design. (1) 2057 Bulb.

3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). Accepts 2-prong plug.

8-13/16" x 5-1/16". Incandescent trailer light serves 4 functions: stop, turn, tail, rear-reflex, and license plate light. Corrosion-resistant bulb sockets. Surface mount to trailer - hardware not included. 2-Wire design. (1) 1157 bulb.

5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.

4-1/2" x 2-3/16". Incandescent trailer light serves as a clearance and side marker light. Vibar socket absorbs road shock and vibration. Durable steel housing. Surface mount - hardware not included. 1-Wire design. PC rated. (1) 168 bulb.

3-3/4" x 2-1/4" Rectangle. Incandescent trailer light serves as a clearance or side marker light. Durable chrome-plated ABS housing. Flush mount to trailer with included screws. Twist-in socket with 2-wire design. P2 rated. (1) 194 bulb.

...Features: Incandescent trailer light functions as a mini identification light bar for trailers over 80" wide 3 Peterson 107R lights are replaceable (422600 - sold separately) Durable...

6-1/2" x 2-1/4" Oval. LED trailer tail light serves 4 functions: brake, tail, turn, and backup light. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed with grommet (not included). Accepts AMP connector.

8-13/16" x 5-1/16". Incandescent trailer light serves 4 functions: stop, turn, tail, and rear-reflex. Built-in reflector. Corrosion-resistant bulb sockets. Surface mount to trailer - hardware not included. 2-Wire design. (1) 1157 bulb.

7-15/16" Waterproof, LED light displays brake, tail, and turn signals on the passenger side of your trailer, and also provides a side marker light. It mounts on the surface of your trailer with the included bolts and hardwires to the trailer.

5-5/16" x 3-7/16" Rectangle LED trailer tail light functions as a stop, tail, and turn signal light. Sealed lens and housing meets IP67 ingress protection level. Recessed mount with grommet (not included). Connection accepts AMP plug.

4-9/16" x 2-1/2". Incandescent dome light illuminates your trailer's interior. Push-button nylon switch controls on/off function. Screw-on lens. Durable steel base. Surface mounts with included hardware. 2-Wire design. (1) 1141 bulb.

16-1/4" Long x 1-1/4" tall x 1" deep. Identification light bar is designed for trailers wider than 80". Mounts to surface of trailer - hardware not included. 2-Wire pigtail.

...Features: Incandescent trailer light functions as a mini identification light bar for trailers over 80" wide 3 Peterson 107A lights are replaceable (422400 - sold separately) Durable...