See what our Experts say about this Optronics Trailer Lights

• Replacement LED Trailer Lights for a 2000 Ranger R71 Boat Trailer
  I would love to help you upgrade to LED lights on your trailer but unfortunately, trailer manufacturers don't just give us a list with every light on the trailer for situations like this. If you can provide me with your full 17 digit VIN I would be more than glad to call on your behalf and see if we have the correct replacements for you.
  view full answer...
• What Direction Should Trailer Tail Light # STL72RB Face When Mounted on Trailer
  When mounting the Trailer Tail Light # STL72RB as a turn signal/tail/stop light it has to be facing directly behind the trailer towards a vehicle that would be behind you. The orientation of the wiring harness pins is not super important but it has to be visible directly from a vehicle behind the trailer.
  view full answer...
  
• Installation of Optronics Sealed, 6-1/2 Inch Oval LED Trailer Stop, Turn, and Tail Light
  Thank you for your purchase from etrailer.com! The Optronics Sealed, 6-1/2 Inch Oval LED Trailer Stop, Turn, and Taillight # STL78RB that you purchased will need to be hardwire installed on your trailer. You will want to connect the light to your trailer's wiring by function. You can use a circuit tester, like # PTW2993, to determine the functions of your trailer wiring. The white wire on the light will need to be grounded. I recommend running the light ground back to the main trailer...
  view full answer...
  
• Oval LED Trailer Taillights that are Red and White with More than One Diode
  Hey Brian, for white you could use the part # BUL72CB which has 10 diodes and then for red # STL72RB which is also 10 diodes.
  view full answer...
• Replacement LED Trailer Lights For a 2003 Pace American JT612TA2 Enclosed Trailer
  Unfortunately Steve, I have no way to see exactly what lights came on your 2003 Pace American JT612TA2. Based on some images I could find it looks like your trailer uses the oval style light like the Optronics # STL72RB which is 6-7/16" long. If yours is a different length please let me know. For the clearance lights on the fenders they look like the snap in lights like the Amber # AL91AB and Red # AL91RB. The top 3 marker lights look like the # MCL0032RBB. These are the very common 4"x2"...
  view full answer...
• Recommended Replacement Grease Seals and Grease Cap for a Boat Trailer
  Marty, it looks like the closest grease seals we have to what you're looking for is the Grease Seal # 010-180-00. This seal has a 1.68" inner diameter, a 2.33" outer diameter, and is sold in a quantity of 1. For the grease cap (which I assume is what you meant by hub cap) you can use the Fulton Grease Cap # F001524 which has a 1.94" outer diameter.
  view full answer...
• Tail Light That Fits Mounting Bracket for 6-1/2 Inch Oval Trailer Tail Light 337LB1
  The Mounting Bracket for 6-1/2" Oval Trailer Tail Light # 337LB1 comes as a single piece, so for multiple you would just need to enter the number of brackets you wanted in the "Quantity" box on the product page. For the complete kit you will need a the bracket, lights, a grommet, and a wiring harness, which I'll list out for you below. - Mounting Bracket for 6-1/2" Oval Trailer Tail Light # 337LB1 - PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb - Optronics LED Trailer Tail...
  view full answer...
• Tail Light Replacement for Vision LED TL63020
  It looks like the specs are close enough and the connector at the back of your Vision LED TL63020 R matches the Optronics LED Trailer Tail Light # STL72RB so I'd say you're good to go! If you need to replace the grommet as well you can do so with part # a70gb Attached is an installation video for you to check out.
  view full answer...
  
• Tail Lights, Grommets and Wiring Needed For the Buyers Products Tail Light Mounting Box # 337LB383SL
  For the 6" oval hole in the Buyers Products Tail Light Mounting Box # 337LB383SL you will need the PVC Grommet # a70gb and a Optronics LED Trailer Tail Light # STL72RB. A 3-Wire Pigtail # A45PB is needed for connecting to the light. The 2" hole on the side will use the 2" Round Grommet # A54GB and Miro-Flex LED Clearance or Side Marker Light # MCL50RB. A 2-Wire Pigtail # A86PB is needed for connecting to this light.
  view full answer...
• Grommet And Wiring For Optronics STL72RB Light
  I took a look at your Optronics LED Trailer Tail Light # STL72RB, and the only grommet I was able to find that fits this light, is the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb that you mentioned, unfortunately. Additonally, to complete install of # STL72RB you're also going to need either the Right Angle 3-Wire Pigtail for Optronics Trailer Lights # A47PB or the 3-Wire Pigtail for Optronics Trailer Lights # A45PB, depending on the orientation needed.
  view full answer...
• Will the ST70RB and the STL72RB Both Fit on the Same Sized Light Housing?
  To answer your question, both of the # ST70RB and the # STL72RB are 6-1/2" long x 2-1/4" wide x 2-3/8" deep lights; the main difference is that one is an LED light while the other is an incandescent. I was able to find some information on your TruckLite 60283 light and the best match to replace that light is the # ST70RB , since your trailer light system is wired for incandescent lights. If you wanted to switch both lights over to LED, you would use # STL72RB but you would likely need...
  view full answer...
  
• Recommended 6-1/2 x 2 Inch Oval LED Tail Lights With Wires And Grommets
  We have 6-1/2 x 2 inch lights but the wires and grommets are sold separately. I recommend the the Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 10 Diodes - Red Lens # STL72RB along with the 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead # A45PB and the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB. This combination will give you the lights you are looking for.
  view full answer...
• Do The Optronics # STL72RB And # STL82RCB Use The Same Bulb And What Is The Wattage?
  The Optronics # STL72RB and # STL82RCB are identical in size at 6-7/16" long x 2-5/16" tall x 1-3/4" thick and they do use the same shape/style of lens and bulb so it certainly could be used as a replacement. The 72 and 82 in the part number is not an indication of the wattage. LED trailer lights will have much lower wattage than that. I was not able to find a specific wattage listed for the # STL72RB and # STL82RCB lights, but I can tell you that other similar 8 and 10 diode LED trailer...
  view full answer...
• Recommended Replacement Lights for Truck Lite Stop/Tail/Turn Lights on a Featherlite Trailer
  Good news, I can help find you replacement lights for your Featherlite Trailer. I was able to find LED stop/tail/turn lights that will be compatible with your Truck Lite weathertight plug. I have attached them to this page for your convenience. If you are in need of a replacement grommet as well the # A70GB will be the for you.
  view full answer...
• Replacement Running Board Lights For A 2003 Chevy Express 1500
  Like the Custer Rubber Grommet # G65G, all the oval grommets we currently carry will be designed to fit a 6-1/2" light, like the Optronics LED Trailer Tail Light # STL72RB. However, we do have the Replacement Lenses and Housings # 27-9904, Replacement Light Housings # 27-9902, Replacement Wiring Harness # 27-9903, and Replacement Bulbs # 27-9905 that are designed to fit the Westin Molded, Lighted Running Boards # 27-0015. These do look remarkable similar to your lights, but will measure...
  view full answer...
  
• Replacement LED Tail Light For Pacific Trailer
  We have LED trailer lights available. If you have the dimensions of the light you want to replace that would help in finding the right replacement for your Pacific trailer. From my research I found that some of the Pacific trailers use part # STL42RB. This is a 4-inch round flange mount light that has 10 LEDs. It is a three function stop/turn/tail light. If you need a flush-mount light, we also have part # STL43RB. this is also a 3-function 10-LED light. If you are looking for an oval...
  view full answer...
• Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
  I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light # STL72RB. This is also a 10 diode LED light with stop, turn and tail light functions like the light you're replacing and also measures 6-7/16" long and 2-1/8" wide like your Glo-Brite light. The Optronics brand is synonymous with high quality craftsmanship...
  view full answer...
• Can Trailer Lights Be Wired for Both Turn Signals and Brake Lights Using Only One Light Per Side
  You can absolutely wire your trailer for both turn signals and brake lights using only one light per side, as long as each light has either 3 wires (tail lights, stop/turn, ground) or 2 wires with a ground that goes through the mounting hardware. When using a 4-Way connector, this is very standard and typically how the trailer lights will be wired. You will have no issue wiring your trailer in this manner. I have included an article on trailer wiring that you might also find helpful.
  view full answer...
• Grease Caps and Light Parts for 2004 Mac-Lander 16T FSWS Utility Trailer
  We can help you with grease caps and light parts for your trailer. To select correct grease caps you will need to measure the inside bore of your hubs using a precision digital caliper like # PTW80157. These dimensions need to be very precise, such as 2.30-inches as an example. The simply select the size to match, such as # F001601, using the grease cap page I linked for you. For the lights we offer both lenses only and complete trailer lights of all kinds. Links to both types of items...
  view full answer...
• Replacement LED Lights for a 1998 Ranger Boat Trailer
  We have a large selection of LED trailer lights which I have attached for you. You will need to go through these and pick the one that best matches your existing lights. You could also provide me with a dimensional photo to which I could then search our selection and find the best match for you but these would be your only options as we do not have information about what lights your trailer came with.
  view full answer...
• Correct LED Replacement for Optronics ST70RB Trailer Tail Light
  The Optronics Fleet LED Trailer Tail Lights # TLL12RK are a slightly longer light so they aren't a replacement, but we do have the LED replacement you need for the Optronics # ST70RB. That part is the Optronics LED Trailer Tail Light # STL72RB. This light uses the same PVC Grommet # a70gb with the 3-wire Pigtail # A45PB or # A47PB (right angle pigtail) for installation. I have added a link to a video review for you to check out as well.
  view full answer...
• Are Replacement Bulbs Available for Optronics 10 LED Oval Trailer Light # STL72RB
  The Optronics 10-LED Oval Trailer Light, part # STL72RB, is made with a housing that is sonically sealed to make it waterproof. This means that there are no user-replaceable parts inside.
  view full answer...
• Replacement Trailer Taillight for Texas Pride Car Hauler
  I looked up pictures of Texas Pride car haulers and based on what I saw the Optronics LED Trailer Tail Light part # STL72RB is the correct replacement. If you need the grommet too you'd want the part # a70gb.
  view full answer...

Do you have a question about this Trailer Light?