Customers compare TLL56RK to these similar products
Products Featured in this Video
Today you're going to be taking a look at the Optronics LED Combination Tail Light Kit for trailers under 80 inches wide. Now it is available with just the driver's side tail light, as well as just the passenger side tail light. So here's what our trailer kit looks like once we have our lights installed. It's going to give us two combination tail lights that are going to have seven functions. Each… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thanks for the photo, that really helps to narrow it down! For incandescent replacements you need these Optronics Lights: - Driver Side #ST57RS - Passenger Side #ST56RS Then for LED replacements you need these Optronics Lights: - Driver Side #STL57RB…
view full answer...For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked…
view full answer...We do indeed have some LED taillights that'd work great on your boat trailer. I'd recommend #STL57RB for the driver side and #STL56RB for the passenger side. These lamps measure 6-1/16 x 2-5/8 inches, and would work well on your trailer. As…
view full answer...The description of the LED Combination Tail Light Kit for Trailers under 80" Wide #TLL56RK does specify that the lights have a side marker function (in the second line under "Features"). I have added a link to a help article which…
view full answer...Yes, you can use the NOCO GEN On-Board Battery Charger #NOC34FR on your pickup's parallel batteries without disconnecting them. If your batteries were in a series, they would have to be disconnected. Since your batteries are parallel and maintain…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...The Timbren #A20RS545 product's description means that it is compatible with up to 13" wheels, not tires. The 3500 lb. Axleless Trailer Suspension System by Timbren #A35RS545 will work for you. Sturdier than a 2K setup, it still maintains…
view full answer...To upgrade the axle and hubs on your Northern Hardware Trailer, I recommend looking at an Axle-Less System like the Timbren #A20RS545. This suspension system will provide you with a smooth, quiet, and safe ride and can completely eliminate the need…
view full answer...We do have a Timbren Axle Less setup that can have the bolt pattern you are wanting of 5 on 5-1/2 inches if you went with the part #TASR1THDS04 and then the hub/drum #AKHD-555-35-EZ-K with the brake assemblies #AKEBRK-35-SA and you'd be set.
view full answer...Our largest wheel and tire we carry I recommend using for the Timbren Axle-Less Trailer Suspension #A20RS545 is the Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel #KE27JR. This is our largest wheel diameter with the 5 on…
view full answer...The Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs #A20RS545, the maximum load is 2,000 lbs per kit which is one axle, or 1,000 lbs per side if they could be used individually. If you wanted the trailer…
view full answer...