1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side

ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side

Item # STL0066RBG
lowest price pledge
Our Price: $55.27
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.8 lbs
Quantity: 
In Stock
STL0066RBG - Submersible Lights Optronics Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. 3-Prong molded plug Lowest Prices for the best trailer lights from Optronics. ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side part number STL0066RBG can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (449)
  • Q & A (5)
  • Videos (2)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - STL0066RBG

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 7-1/2L x 3W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Side Marker
  • Submersible Lights
  • Optronics

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. 3-Prong molded plug


Features:

  • LED trailer combination tail light serves 5 functions
    • Stop, tail, turn, reflector, and side marker
  • ONE Series provides bright light using fewer diodes than other LED lights
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Built-in rear reflex reflector removes the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red screw-on lens over white LED
  • Surface mount on trailer - hardware not included
  • Molded 3-prong plug provides a watertight connection
  • DOT compliant


Specs:

  • Configuration: passenger side
    • Driver side: STL0067RPG (sold separately)
  • Dimensions: 7-3/4" long x 3-1/8" tall x 2-7/8" deep
  • Total diodes: 3
    • Tail: 1
    • Turn signal: 2
  • Power draw at 12.8V:
    • Stop: 0.154 amps
    • Tail/turn: 0.060 amps
  • Lifetime warranty on LEDs


Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.



STL0066RPG Optronics ONE LED Trailer Combination Tail Light for Tracker Trailers - Submersible - 5 Function - 3 Diodes - Red Lens - Right Side




California residents: click here


Video of ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics ONE LED Trailer Tail Light Installation

Hello trailer owners, today we're going to be taking a look at Optronics replacement, taillight assemblies. We're going to be installing the driver's side, which has an additional light, which is a license plate on the bottom. But you can also pick up the passenger side here at etrailer. It's going to be exactly the same, just set up mirrored for that side, without that license plate light.And this is what our replacement taillight is going to look like when it's installed. This is going to be an upgrade over your existing tail lights as this one is LED, which is going to provide you with brighter lights that draw less current. So, it's less draw on your battery and on your truck.

And they also last about 50 times longer than your typical incandescent bulbs. This is going to be a six function light over here on the driver's side.It's going to provide you with your stop, tail, turn and side marker lights, and also function as a reflector. The six features exclusive to the driver's side, and that's going to be our license plate light down here on the bottom to eliminate your license plate. Our passenger side light here is going to have all the same features minus that light on bottom for your license plate.These lights are easy to install. There's only three wires to make the light function.

This one here is for our driver's side. They are side specific, due to the extra feature. So I do recommend you pick up one for the passenger side as well. It's a separate part number. That way you can have matching lights to provide all the signals here at the back of your trailer.

We get our replacement by cutting our wires. So, we're just going to grab our wires here. We're going to go ahead and cut both of them.And we'll set that aside. And then we can remove the screws here on the back. Ours are in 11 millimeter, but yours may vary.

And we are going to go ahead and remove the license plate bracket since we're doing our driver's side. Our license plate bracket is held on by the same hardware. We're actually going to be replacing this with a nicer one.Our passenger side is going to be the same way, just won't have that license plate bracket. And you can see here. Our last wire was a ground wire that just had to run around and connect it to one of those studs. So, here we can see our wires and they're all smashed there. It looks like when they we're installed, they had gotten smashed from the previous installation. So, we're going to try to avoid that so that we don't have any more issues with our new light like we have with this old one.Now the studs that you see here, we are going to have to reuse those. So, you want to pull those out of there. They just slide down the slot. We're going to do this one as well. And we're going to be using those with our new light. Now, if you're adding new lights or replacing ones that didn't have the little studs here, these are just carriage bolts. You can get those at your local hardware store. So, then I'm going to slide them in. We're going to be using the two holes closest to the inside of our light because it's our outer marker light.And they just slide in. They're going to be a little difficult, because there's a little tab there that kind of holds it to lock it in place. And then boom, it just clicks in and do the same thing with this one and you do got to push kind of hard to get it started.And then it just snaps up right into place. Now you're going to notice here that the end of the new light has this pigtail on it. It's your old trailer has a matching pigtail. You can just plug those right in and you're good to go. Our trailer doesn't have a matching pigtail. So, we're going to be hard wiring ours with just butt connectors. You can get heat shrink butt connectors here at etrailer. We're going to be using the blue ones as it's going to be the most appropriate size for our wires. So, we're just going to cut this pigtail off here, set it aside. We don't need it. And then we can take these three wires and we're going to strip them back.We can now install our new light. I'm going to take the wiring first and I'm going to pass it through the hole inside of the frame. So, that way it goes out to meet the wires on the other side that we need to connect it to. And if we look there're little notches here at the top and bolt on the side, we want to make sure our wiring is in that notch so it's not pinched like our old one was. We're then just going to line up the studs with the slots. We can then install our new license plate bracket.And if you need a new license plate bracket, you can pick one up here at etrailer. And then we'll just, re-install the nuts back onto our studs. Well and just re tighten them down.Now we can start hooking up our wires. So we have our white, our brown and our yellow and previously our white was attached to the stud on the back. But with these all being inside this duplex sheeting here, the white wire, we'd have to cut the sheeting off in order to put it over here. So, we're just going to run a new ground just with a self-tapper directly to the frame. We're going to strip each one of those back now.Now that we've got all the wires stripped, we're just going to start hooking them up and we're going to match them up color for color because yellow is our left turn so we're going to match that with the left turn on our trailer. Brown is our tail light so we're going to match that with the tail light on our trailer, which is also brown. And that's your typical colors that you're going to find.We're going to be using heat shrink butt connectors to make these connections. First I'm going to slide it on one end, crimp it down. Now again, that side crimped on grab the yellow wire from our new light. Slide it into the other side and then crimp this one. We'll then use our heat gun to shrink down our butt connectors.Now on our white wire. This is our ground wire. So, we're going to slide on a ring terminal. You can also get those here at etrailer, if you need one. And then we're just going to be running this right into the frame of the trailer, just right down here. I'm just going to use a self tapping screw and run it right in. You can get self-tapping screws also here at etrailer.Just want to make sure it's nice and snug. So we're going to go a little more. You don't want to break the head off the screw though. So, just kind of check. If you're replacing the other side, you do want to keep in mind that this one is a different part number because it's specific for this side, hooking it up. It's going to be exactly the same, except for it's going to be a green wire instead of a yellow wire because green is the trailer standard for passenger turn or right turn.Go ahead and hook up the test box. And we want to make sure that our lights work. Here's our tail lights, and we can see that all the lightings are functioning properly on our tail lights. I would turn on our turn signal. We can see it blinking here. Everything's good and brake lights. We can also see that that's all working properly. And that completes our look at Optronics replacement, tail light assemblies.


Customer Reviews

ONE LED Trailer Tail Light - 5 Function - Submersible - 3 Diodes - Red Lens - Passenger Side - STL0066RBG

Average Customer Rating:  4.8 out of 5 stars   (448 Customer Reviews)

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. 3-Prong molded plug

- STL0066RBG
by:

Perfect replacement for the broken tail light on my 2017 tracker 175 TXW boat trailer, literally plug and play, all of the holes lined up, etc.


Comments
Still working perfectly
Chris G - 06/19/2021


- STL0066RBG
by:

I just got a new tracker boat & trailer and I did not notice the taillight light was cracked (it still worked). This light cost more then most, but the quality is evident immediately and a perfect match from the old one. It was a 5 min. replacement.



- STL0066RBG
by:

We ordered the light and it's was broken when we opened it. I contacted them and they sent a replacement immediately. Great service.



- STL0066RBG
by:

It's as simple as two bolts and plug in, it can't get any easier than that. No splicing of wires or anything just plugin and go. It's about time a product of this quality has hit the market.



- STL0066RBG
by:

Never received


Comments
Thank you for letting us know. Our customer service team should ben reaching out to you in the near future.
-- Etrailer Expert Brooke M - 10/01/2021

Comments
Thank you for letting us know. Our customer service team should ben reaching out to you in the near future.
-- Etrailer Expert Brooke M - 10/01/2021


- STL0066RBG
by:

bought this light for my 2019 bass pro trailer. was identical to the drivers side minus the license plate light of course. had to use the hardware from the old light but no biggie. plug and length of wires were exact to old light. very happy with this product. would buy again.



- STL0066RBG
by:

Product was exactly what I wanted and needed. Ordering from etrailer’s website was easy and shipping was about the normal, as in not fast but not slow. Will continue to do business here in the future, thank you for offering good products!



- STL0066RBG
by:

Exact replacement. Plug and play. 5 min install.



- STL0066RBG
by:

Great follow up after order was placed by way of emails



- STL0066RBG
by:

Perfect fit. The swap out literally took 5 minutes.



- STL0066RBG
by:

perfect replacement light



- STL0066RBG
by:

Highly recommend etrailer.com. Received my order in 2 days. The trailer lights I purchased was for my boat trailer and exactly what I had ordered. It took me roughly 10 minutes to replace the burnt led lights and replace with the new led lights. Driver and Passenger Side.



- STL0066RBG
by:

Great product, etrailer was the only place I could find an OEM replacement for my tracker boat trailer.



- STL0066RBG
by:

I am very satisfied with your company.



- STL0066RBG
by:

Great product



- STL0066RBG
by:

The part that I ordered was exactly what I wanted, if I have any complaint it would be that my order showed up 2 days after when it was suppose to arrive. In my opinion that wasn't a big deal.



- STL0066RBG
by:

Lighting for LED is a little dim in my opinion but the 3 way bullet connectors is great easy way to change a tail light. If the light was brighter and was completely sealed I’d give it 5 stars.



- STL0066RBG
by:

Product was exact match to my driver's side taillight. No manufacturer name on old part. The description, sizes and photos on Etrailer helped me pick the right light.



- STL0066RBG
by:

These where the exact lights that where on my trailer and they plugged right in. I would highly recommend etrailer.com to anyone needing parts.



- STL0066RBG
by:

Etrailer was the only place I could find an exact replacement tail light for my Tracker trailer.



- STL0066RBG
by:

The product replaced my broken taillight exactly and was easy to install



- STL0066RBG
by:

Package and product arrived in perfect condition! Took about 5 minutes to install and it worked perfectly. Thank you very much.



- STL0066RBG
by:

The light was an exact match of the original. Fast shipping. And knowledgeable chat staff. More help than parts desk at the boat dealer. Thanks



- STL0066RBG
by:

was the exact replacement for my broken tail light. fit perfect,easy to enstall.



- STL0066RBG
by:

The new tail light fit perfectly and was simple to install.


26
461
Show More Reviews

Ask the Experts about this Optronics Trailer Lights

  • Replacement LED Drivers Side Tail Light for Boat Trailer
    While we definitely have 3-wire LED driver's side tail lights for your trailer, there are none I could find that fit your exact description. The best way to find a replacement light is to measure your current tail lights and find the one that most closely matches your measurement, and also know if your lights are surface mounted or recessed mounted. For example, the Combination LED Trailer Tail Light - Driver Side # STL9RB is 5-1/16" wide x 4-9/16" tall x 2-5/8" deep and is a surface...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Tail Light Lens for a 2017 Tracker Bass Boat Trailer
    The tail lights you have on your trailer are the ONE LED Trailer Tail Lights part # STL0067RPG for the driver side and part # STL0066RBG for the passenger side. Unfortunately, Optronics does not offer a replacement lens for this particular light so your only option is to replace the entire assembly but this is super easy to do. It should just be plug and play once you remove the mounting hardware.
    view full answer...
    Image 1 for
  • Submersible Tail Lights with Triangular Connector to Upgrade Trailer
    Would you be able to send me some pictures of what your current lights look like and the triangular plugs that you mentioned so I can help you get something that works best?
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • What Causes Water To Enter a Boat Trailer Tail Light
    In regards to trailer tail lights, a common mistake that people make is not unplugging them prior to launching the trailer. The reason that this is important has to do with not only the mixing of electricity and water but also the rapid cooling. If you are using your lights down the boat ramp you'll be heating up the bulbs and housing. When the trailer is dunked under water this rapidly cooling can cause the housing to suck in water. Granted, this is more of an issue with incandescent than...
    view full answer...
  • Replacement Optronics Rectangular Trailer Tail Light with Three Prong Plug
    The ONE LED Trailer Tail Light part # STL0067RPG for driver or part # STL0066RBG for passenger has a three prong pigtail attached to the light so this may be what you're looking for. The ONE LED Trailer Tail Light measures 7-3/4" long x 3-1/8" tall x 2-7/8" deep and severs six functions; stop, tail, turn, reflector, side marker, and plate light.
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Video Edited:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.