Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens
(36 reviews)
Price: $64.71
In Stock
Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens
Item # CE86FR
Retail:$68.50
Our Price: $64.71
You Save: 6%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (36)
- Q & A (0)
- Videos (1)
- Photos
Command Electronics Trailer Lights - CE86FR
- Tail Lights
- Rectangle
- LED Light
- Red and White
- 9-5/8L x 7W Inch
- Surface Mount
- Stop/Turn/Tail
- Non-Submersible Lights
- Command Electronics
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.
Features:
- Rectangular LED trailer light works as a stop, turn, tail, and reverse light functions
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Red and clear lens with white LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- 4-Wire design
- DOT compliant
Specs:
- Dimensions: 9-5/8" long x 7" tall x 5/8" deep
- Diodes: 20
- Wire length: 7"
- Weight: 0.95 lbs
- 1-Year limited warranty
ET003-2000 Command Electronics Ultra Modern LED Double Tail Light - Stop, Tail, Turn, Reverse - 12V DC
Replaces 003-2000
Video of Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Command Electronics Trailer Lights - LED Tail Lights - CE86FR
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this LED dual trailer stop, turn, tail and backup tail light with the red and the clear lens. This is a rectangular LED trailer light, which will work as a stop, turn, tail and reverse light on your trailer. You can see it's a very nice thin rectangular design, which is very lightweight. And it does use LEDs, which make great replacements for incandescent lights.
LEDs will last 50 times longer. They are more efficient because they provide better light with less power output. And of course, no bulbs to replace or brittle filaments to break.This does use a nice red and clear lens. Has 20 white LEDs, 10 on this light and 10 over here. Now, at the end of this video, I'm going to hook this up to some 12 volt power just to show you how the lights, how bright they are, and how they operate.This light is compatible with 12 volt DC systems.
It is designed to mount on the surface of the trailer. Now, the hardware is installed this is not included, but it does include this foam mounting gasket that you'll use when you install it. It is a four wire design, has a black wire for the tail light, white for the ground, red for the stop and turn, and then the purple for the reverse function. The length on the wire leads are about seven inches. The slide is DOT, Department of Transportation compliant.
Give you some dimensions on this and then we'll hook it up.So the overall width on the slide from one end to the other is right at nine and 5/8 inches long. Height of it is right at seven inches tall. And the depth on it is only about 5/8 of an inch deep.So we're going to do now is I'm going to hook these wires up. So get our white wire for the ground, our black wire for the tail lights, and our red for the stop and turn. And then the purple I'll be attaching that to the power, just to show you the reverse section.So we'll go ahead and turn on the 12 volt power.
And there you can see the tail lights come on. I'm going to go ahead and turn off the overhead lights. There's your tail lights. And then when you hit your brakes, you can see your brakes, how they'll light up brighter. And then if you operate your turn signals, you can see there's your turn signal. And then again, if we do the reverse, there's your reverse. See the reverse is very bright white light. So it lets everybody know that you're backing up.We'll go ahead and turn back on our overhead lights. And we'll turn off our power. But that should do it for the review on this LED dual trailer stop, turn, tail and backup tail light with the red and the clear lens.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens - CE86FR
Average Customer Rating: 4.9 out of 5 stars (36 Customer Reviews)
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.by: Jack 310/09/2022
This is second unit we purchased. They are to replace originals on a jayco RedHawk that cracked and developed electrical shorts. Recommend you buy the pair and replace both at the same time. They look a bit different from the original equipment. The first we had installed looks very good.
by: Scott05/29/2023
I had a failure with OEM light and found a close looking replacement but only better. The replacement light is a little thinner and looks better so I purchased another one for the other side. It just takes a little basic electrical knowledge and some sealant to install.
by: Bobby 05/05/2023
They were very close to the ones I had on the camper. Was adding a. second set of light because of the biked covering a portion of the existing lights.
by: Matt 09/19/2023
It fits, works, and looks great!
by: Kendra09/13/2023
Fast and correct very
by: Joseph 06/09/2023
Fit perfectly and is obviously brighter than the original. Ended up replacing both sides to make them look nicer.
by: William11/29/2022
Will @ customer service was helpful when asked about the wiring configuration, despite the main server bring down. He jumped on Google and found the information.
by: Scott05/20/2022
Just installed my new rear tailer light that closely matched my OEM in size, shape, and the mounting holes lined up exactly as the OEM. I could not get an OEM form Northwood any more so the dealer found this one on etrailer for me and it's probably an updated dated version of my original, but it's better than the original because it has a rubber seal on the back so it seals better, and it's brighter too. I only needed to replace one light because for some reason all of the LED's were not illuminating so I only order one light but because the replacement from etrailer is better I just ordered a second one so it matches better and the performance of the lighting is better too.
by: Rene 05/31/2023
perfect match perfect fit!
by: CECILIA04/24/2023
RECEIVED PART IN GOOD CONDITION AND IN A TIMELY MANNER.
THANK YOU FOR THE GREAT SERVICE..
by: Russell 04/01/2023
Fast delivery and exactly as described. Couldn't be more satisfied. Thanks again
by: Rowe Ford Sales03/27/2023
Great service and quick delivery
by: Larry 12/12/2022
Looks like a good product--appreciate the quick delivery as promised
by: Margaret10/12/2022
The product is everything you said it would be, thank you very much for the fast turn around.
by: David P06/13/2022
Love the sealed design. Fit perfectly!
by: James 08/03/2022
James
8/4/2023
The LED lights have held up so far with no leaks after a year in Ohio
by: Peter03/16/2022
Easy to install and works well.
by: Oneshot Automation03/03/2022
They are working great!! Very satisfied !!
by: John 09/01/2022
Works ok
by: Patrick 02/04/2023
by: Wayne 10/11/2022
by: Chris 03/16/2023
by: William 04/27/2021
by: David 09/02/2023
25
36
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Replacement Turn Signal Lights for SAE-IST-86 Lights on TrailerUsing the numbers you provided that are on your existing light, I have a replacement light for you to check out. This assembly will replace one standard, incandescent trailer light with a longer-lasting LED. I recommend the Command Electronics Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens Item # CE86FR. This would totally replace your current tail light. Check out the attached review video of this thin, surface mounted, tail light.
view full answer... - Can The Dual LED Trailer Tail Light # CE86FR Be Used On The Driver And Passenger SidesThe Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR has the wires directly in the center of the light allowing you to turn the light whichever way is needed depending on the side of the vehicle you're installing it on, therefore this light can be used on both sides.
view full answer... - Does Dual LED Trailer Tail Light Come With 1 or 2 LightsThe Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR comes in a quantity of one, so it is just a single light. This is a 20 diode, 9-5/8" long x 7" tall x 5/8" deep, surface mounted light. I have added a link below to a video review for you to check out as well of the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR.
view full answer... - Will Nicer Trailer Lights Keep From Burning Out on 1996 Bigfoot Truck CamperThe Command model lights like the Dual LED Trailer Tail Light # CE86FR tend to be a little more fancy than Bargman but the Bargman line of lights is a solid choice for sure. If you're seeing burn out with your trailer lights then you definitely need to check all of your ground and your connections. Your grounds need to be solid and connected to a clean, bare-metal surface, and then your wiring connections need to be clean and in good shape. Upgrading to nicer lights than a Bargman brand...
view full answer... - Replacement 84 Series Taillights for a Haulmark Car HaulerSounds like you have Bargman 84 series double lights which is what you referenced. If what you have looks like that style of light it would be the correct replacement. This is a very common style of light seen on trailers and I am very confident it's what you have. For a replacement, I recommend the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR
view full answer... - Replacement Light Assembly for Trailer with 84 Series LightsA good replacement for your current lights would be the Command Performance Dual LED lights # CE86FR that provide Stop, Turn, Tail, and Backup lights. It has a red light and a white lite. The white light serves as the backup. Check out the attached video of this product. You would need to purchase two lights.
view full answer... - Are The Dual LED Trailer Tail Light, Part # CE86FR, A Fit For The 2020 Jayco RedhawkWithout the VIN of your 2020 Jayco Redhawk, I cannot find out what lights came on your motorhome. If the lights on your motorhome measure 9-5/8" long X 7" tall X 5/8" deep, the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens, part # CE86FR, should work. Please keep in mind these lights do not come with hardware. I have included a video demo link below.
view full answer... - Replacement Tail Lights for 2018 Jayco Alante MotorhomeWhat you have there are the Command 003-20 incandescent tail lights. Although we do not have the incandescent replacement, we do have the LED version which is the # CE86FR. You will want to keep the lights the same way they are now with the brake light on the outer and the white light on the inner. These do not have a designation for driver or passenger side so all you need to do is flip it around to the correct orientation when you mount it.
view full answer...
- What is the Dimension of the Recessed Housing on the Command Electronitcs # CE86FR Tail LightI went out to the warehouse and pulled the Dual LED Trailer Tail Light # CE86FR, to measure. The Light is 9-5/8 inch long, 7" tall and 5/8" deep. It has a very thin rectangular design. This is a surface mount tail light so there is not a recessed part.
view full answer... - Replacement Tail Light for a 2020 Jayco Redhawk Motorhome Thanks for the additional information and picture of the brake light on your 2020 Jayco Redhawk. I have a solution for you but those lights are attached to a single board and not able to be separately replaced or even repaired. The replacement light your are looking for is the item # CE86FR. This is dual LED trailer tail light with Stop, Turn, and Tail functions. It is 9-5/8" long x 7" tall x 5/8" deep.
view full answer...
- Taillight Replacement for Trailer with SAE Number 1ST P2-84-DOTWe have a full replacement for your light. The Command Electronics # CE86FR. Take a look at the attached video to see them in action.
view full answer... - Dimensions Of Command Electronics LED Tail Light CE86FRThe Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR, is a surface mount light. The light is 9-5/8" long x 7" tall x 5/8" deep. This is a very thin light assembly, so the depth includes the entire light from back of the base to the front of the light. I attached a video of this light to see the light being measured and to see the other features.
view full answer... - Command Electronics Ultra Modern Dual LED Tail Light Resistor RequirementsThe Dual LED Trailer Tail Light # CE86FR will not require a resistor if you are mounting it on a trailer. The flash rate is determined off the vehicle and the LED bulbs in the trailer should not be affected. Some vehicles will give a lamp out indicator on the dash as they believe the bulb is out. This is mostly found on European vehicles and can be fixed with a Trailer Connector Adapter w/ Lamp-Out Sensor Bypass # 20142. If you are installing these onto a vehicle a resistor may be needed...
view full answer... - Replacement Tail Light Options for a 2004 Forest River Lexington MotorhomeI do have an option for you but we don't carry new old stock or used parts. The only option we could offer you is a new assembly, one you'd likely have to retrofit to make work. I know this is not ideal or probably what you want to do but it sounds like you've already done your homework, the exact replacements are no longer available so the sooner you bite the bullet, the sooner you can get back up and running. The most like replacement option we offer is going to be with the Dual LED Trailer...
view full answer... - Availability of Mounting Bracket for Bargman # 47-84-008 Trailer LampThere isn't a mounting bracket available for the Bargman # 47-84-008 lamp. It's meant to surface mount on the rear of a camper/travel trailer. There will need to be a hole or recess in the outer wall of the camper for the lamp housing to sit nearly flush on the camper. I suppose it might be possible to fabricate a bracket of some kind, but that would leave the back of the lamp exposed to the elements and it wasn't designed for that. If you'd care to reply with some photos of the rear...
view full answer... - Does CE86FR LED Dual Trailer Tail Light Come in Quantity of One or TwoThe Command Electronics Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR comes in a quantity of one so you would need to enter "2" in the box next to "Quantity" on the product page if you wanted a pair. I have added a link to a review video of this light for you to check out.
view full answer... - Dimensions of Dual LED Trailer Tail LightI went out to the warehouse and pulled a Command Electronics Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR. This is a flush mounted dual LED light that has dimensions 9-5/8" long x 7" tall x 5/8" deep. Check out the attached video to see more about this product. This light is surface mounted meaning that it will protrude from the surface of the trailer by a total of only 5/8 of an inch.
view full answer... - Is Command Electronics LED, Surface Mount, Dual Tail Light FlexibleI went out to the warehouse and pulled the Command Electronic Dual LED, Surface Mount, Tail Light # CE86FR. which you referenced, and found that the mounting surface is a rigid, sturdy plastic material which will not allow for much flexibility.
view full answer... - Does the Command Electronics LED, Surface Mount, Double Tail Light, # CE86FR Come in PairsThe Command Electronics LED, Surface Mount, Double Tail Light, # CE86FR, is sold in quantities of 1. We do have several options for light kits that include 2 lights, wiring, and other accessories, but none that include this light. I have included a link to the tail light kits for you and a video of this light.
view full answer... - Dual LED, Surface Mount, Tail Light # CE86FR Sold IndividuallyThe Command Product Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR that you referenced is sold individually. For a pair, you would order 2 of these.
view full answer... - Does the CE86FR Dual LED Trailer Light Have Stop, Turn and Tail Light FunctionsYes, the Command Electronics Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR, is a Stop, Tail, Turn Light. It also has the Backup light so it is a 4-wires. Black wire - tail light White wire - ground Red wire - stop and turn Purple wire - reverse
view full answer... - Where to Take a Trailer With Excessive Inner Tire Wear For Tire and Axle MaintenanceExcessive inner wear on both tires typically means that the trailer is being overloaded. When your trailer is overloaded for an extended amount of time the axle could be bent which means that it is not holding your load appropriately resulting in the excessive wear on the inside of your tires. Another possibility is that the axle is flipped. Generally, an axle is flipped to gain more height, however, the natural bow that is in the trailer that helps support the load will be facing the...
view full answer... - Recommended Surface Mount Trailer Tail LightI have a surface mount tail light that is very similar to the # 47-85-611 recessed light you asked about and it is just under 10-inches, it is surface mounted. I recommend the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR by Command electronics. I attached a review video for you.
view full answer... - Can Command Surface Mount Light part # CE86FR be Used as Both a Left and Right Turn SignalThe Command Electronics Dual LED Surface Mount Light part # CE86FR can be installed on either side of a trailer. It does not have a left or right side designation. You would need to purchase 2 lights. Check out the review video I attached for more info as well.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Jerry B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jack 3.
10/10/2023
after a year, both lights still working and the units have not cracked as the originals did. Better looking units than the originals!!