Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (107 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Original equipment and fit perfectly. Nothing like new brakes. E-trailer sent the items to me within a week.
Think I received the wrong size on first order. But seller was quick to send another version that did fit. After struggling with getting old parts off, the less time between that and putting new parts on, the greater the satisfaction of getting everything back together. But even with a couple of weeks passing, I can tell you that the new parts go back on a whole lot easier than the old parts came off! All told, it was a good company to deal with, and they do work with you to get the right parts. Its cheaper for them to get it right the first time, but they can't see what you have in front of you. That said, some of their charts of what SHOULD be the right parts, were not in my case, and I bought the trailer new and know that no one modified it. But trailer manufactures change things up sometimes, and the documentation is not good. That said, you can rely on this seller to help you when you need it.
My home-made (not by me) trailer used trailer house axles, and the hubs were shot when I got it. Based on the spindle dimensions (thanks, eTrailer!), I determined that these 5200-lb hub/drum assemblies would fit, and they did perfectly. I've repacked many wheel bearings, so installing these was simple. They spin smoothly and seem to do their job well. The most weight I've put on these four hubs is about 5800 lbs, which was near the limit for the tires, but not a problem for the hubs. I've also driven an hour down the highway on multiple occasions, and have no complaints.
I haven't wired up my brakes yet, so I can't comment on how well the drums work.
Can’t go wrong. These are excellent products from a good brand. New brake assemblies fit like a glove.
The four Dexter hubs arrived on time without damage due to the packing technique. They fit and mounted on my Dexter trailer axles perfectly.
Much more rust than I expected, I may have to take one drum to a brake shop and have it turned to clean up the rust.
The brakes on my 2002 Komfort 24-TS trailer were completely shot. I needed to replace the drums (cheaper than having them turned). I also needed to replace the electric brake assemblies and to upgrade them from manual to automatic adjusting. I called etrailer.com a couple of times to make sure I was ordering the rights parts and the phone reps were very helpful and courteous. The parts arrived on time and in good shape. I had everything I needed to complete the job. It took me all day to do all 4 wheels but I saved myself a whopping $1,000 over having the shop do the job.
I ordered 4 drums that came with bearings,seals,lug nuts,and dust caps. the bearings all came loose with no protection. one of the drums came without the package of bearings,seal,lug nuts, and dust cap. when they sent me the replacement package it came with a different seal definitely cheap Chinese junk also no dust cap. the bearings were Chinese as well. I will never order from this company again.
Jenny N.
12/20/2021
I will have our customer service team reach out to you.
Wanted to wait until after our most recent trip with our trailer before giving you the one year follow-up. Just pulled the trailer almost 1000 miles in the Rocky Mountains. The Nev-R-Adjust brakes & drums worked great and I felt very confident in their performance. I really appreciate not having to crawl under the trailer to adjust the brakes. All are good products and I would recommend them to all.
So this was the final upgrade to an 18 year old travel trailer - new brake assemblies, bearings, seals and hubs. The new brakes were a great improvement after a couple of trips break in, assembly was easy (although I do recommend buying a couple extra seals, just in case they get bent on install (ask me how I know). I have never worked on axles before but as a confident diy-er I was comfortable tackling it. Great products that were perfect fit made this an easy deal.
Fit exactly as expected to replace obsolete hub requiring wheels no longer available. Have about 500 loaded miles on it. Performed as expected.
I have ordered from etrailer.com on other occasions and for the most part what keeps me coming back in the pricing. They usually have the lowest price for the same original equipment. Be careful if you haven't heard that your product has shipped in a reasonable amount of time, even if their website says they have the item in stock. They will hold your order until they have all the parts to ship. I had not seen a shipped email for almost a week and when I called they said they would have it to ship in mid august, about a month after I ordered. I was told they had a similar item in stock ready to ship now if I wanted to change my order. I appreciated that and did change my order, however, I needed to know that information at the time they knew it because I had to change my vacation plans because I could not get the parts in time to take our 5th wheel. Overall this is a good place to order parts from and I will keep doing so.
The hub is a quality replacement for the OE hub/drums on an 1967 Airstream. The bearings/seals that come with the kit are not quite the quality I trust, but local shops have better quality ones available. Also, I'm confused as to why it's not listed (and confirmed in sales rep replies of customer questions) for 15" wheels as it fits in the two different styles of 15" wheels we have with plenty of clearance and the neutral offset loads the bearings correctly. I'd also recommend running a thread chaser on the lugs as paint can cause nuts to jam and not seat fully and thus work lose. All in all, with a little TLC, a better replacement option than rebuilding the original hubs.
Dexter provided a new rear seal, but it was the wrong size (apparently they use two different sizes of spindles on these axles). They also neglected to include a new cotter pin. Otherwise its a great product.
Jenny N.
10/26/2021
It is possible that the spindle could use a seal that has the outer dimension of 3.376 and an inner diameter of 2.25 like part # RG06-070. A cotter pin isnt included with the hub however we do have them available like part # 3371302250.
Helpful Links
Recieved drum a day earlier than expected. Was a little concerned when I got it because the bottom of the box was open about 4in. Opened and everything seemed to be there. Almost exact replacement for my 97 prowler 5th wheel. Only difference was original drum had slots on sides to adjust the brakes without having to crawl under the camper. Overall it looks to be very good quality. Just pack the beaings, install grease seal, put on and adjust the brakes. Done!!!!!
Bought these for my trailer house axles. I converted to 6 lugs. Everything was easy. I don't use the brakes as of now. But t looks like a perfect fit. When I do go to brakes ill buy the parts for that.
Same as the backing plates, these hub and drum assemblies fit just right and have been doing a good job on my 10,000 LB dump trailer for over a year now with no issues.
Replacing mobilehome brakes and drum. Ordered drums, brake assemblies, and mounting flanges. Hard part was the flange. The rest is easy. Very satisfied with product and service.
Exact match, installed with new backing plate ordered as well. Packaging could of been better, had 1/4" x 3" rear edge of forward shoe chipped off due to you folks placing drum onto backing plate at an angle during boxing. Have seen this error occur many times from someone not wanting to smash fingers this way with heavy hub assy. Ease to install and adjust, heed my advice to pay attention in the shipping dept to not have damage done this way again.
Very good quality, with straightforward installation. Only negative is the fact that the kit doesnt come with new key washer, castle nut, and cotter pin. So if using this kit make sure to save those!
Purchased 4 new dexter hub assy's with bearings. So far so good. No problems to report.
Product was exactly as described and worked perfectly as a replacement on my Ezloader trailer, shipping was very fast and employees were very knowledgeable and friendly on the phone.
i was afraid this was going to be wrong!!, you know, ordering from the internet!!! but was an exact match!!
William
7/25/2016
great!!
Very professional staff.had nothing left for brakes and Jesse hooked me up.everything fit perfectly.Thank you for the fast shipping too
Alan S.
8/23/2021
Perfect
Haven't installed yet, but got last evening and checked parts....everything looks! The process of ordering with Suzanne at etrailer was a good experience....she knows her trailer parts! I received my brake parts in about 48 HRS! I only wish that etrailer offered a bearing option of Timken brand or some other American made bearing sets!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave T.
10/2/2017
Fantastic!