Replacement Hub Drum for Dexter 8-133

Question

Question:

I need a Dexter 8-133 brake drum. Want to stay with rim clamp wheels. Can you help

asked by: Cliff S

0

Expert Reply:

For a replacement Dexter hub/drum for your 8-133 the correct hub would be the part number # 8-201-5UC3. We have checked with Dexter in the past and this is for sure the correct replacement for the 8-133.

expert reply by: Jameson C

0

Answer 1

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 2

You'll need to do some quick measuring of your backing plate/brake flange to see if you can use the 6,000 lb Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand #23-105-09. I have added photos below that I hope will…

view full answer...

Answer 3

The Dexter 8-133 axle according to my contact at Dexter is an old motorhome axle they no longer make. Their tech said the motorhome axles like what you have are designed for one time use so there are not compatible parts made for even replacement…

view full answer...

Answer 4

Hey Dave, I do appreciate you reaching out but we do not offer any 15" 8 lug wheels. All of our 15" wheels will be either 5 or 6 lug. Any wheel with an 8 lug pattern will be either a 16" or 17-1/2" wheel like the Dexstar Silver…

view full answer...

Answer 5

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel part #AM22627 is an excellent option which is an aluminium trailer wheel that measures 15" diameter x 6" wide and has a 5 on 4-1/2" bolt pattern. That said, we also have some other…

view full answer...

Answer 6

I may have an option for you but mobile home axles are considered a one-time use only product and are not designed to be used on a standard trailer. Therefore, there are no hub conversion kits for them that will allow you to use standard…

view full answer...

Answer 7

Hello Constantin, thanks for reaching out. It might be possible to get a hub for your mobile home axle. Keep in mind that mobile home axels are not designed to be re used, and they typically do not use standard bearing combinations like most trailer…

view full answer...

Answer 8

I spoke with my contact at Dexter to find the bearing and seal information on the 8-133 hub. She confirmed that the 8-133 hub uses inner bearing #25580 and outer bearing #LM67048 with the 10-1 #GS-2125DL grease seal. These match with the hub…

view full answer...

Answer 9

You will need to get the other bearing number from inside your current hubs before we can pick you out replacement hubs. Most likely the outer bearing you pulled is a LM67048 and the inner you have is a 25580 which would mean that the #8-201-5UC3…

view full answer...

Answer 10

We have exactly what you're looking for with bearing kit #BK3-300. This includes one inner bearing and race, one outer bearing and race, the correct grease seal and a cotter pin for your Dexter 5,200 lb axle. For cross reference I'll list the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement Hub Drum for Dexter 8-133

Product Page this Question was Asked From

Continue Researching