Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
(284 reviews)
Price: $58.46
In Stock
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
Item # AKIHUB-545-35-G-EZ-K
Our Price: $58.46
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (284)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-G-EZ-K
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- 1/2 Inch Stud
- etrailer
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
H-545-97 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube
Compare to Dexter 8-248-50UC1-EZ
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-35-G-EZ-K
Average Customer Rating: 4.7 out of 5 stars (284 Customer Reviews)
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.by: Glenn04/07/2024
The grease caps that came with the set does not fit the hub. It is bigger.
by: George 02/20/2024
I placed my order for hubs and bearing w Bay in customer service as I had a couple questions which she answered well. The package was shipped quickly. It arrived with one problem. I called Customer service and spoke with Kate who was very helpful and provided a solution and to replace a item. I was called later by Patrick the shipping lead who assured me the replacement was shipped and apologized for the error. Always excellent service at Etrailer. The only place i will shop for trailer parts.
by: Kevin04/12/2019
Ordered the hub and recipe it very quickly. They provided a video for reference on installation. It was very well made and easy to install. Very pleased with it, but the best part was the customer service. The old hub and bearings were so destroyed that I couldn’t get any numbers off of it. The lady from etrailer stayed on the phone and helped me research it until we found the right hub and bearings!!! In the end it was exactly what I needed and as happy as I am with the product, I’m more happy about the friendly and knowledgeable customer service they provided!!! Highly recommend the company and the products they sell!!!!
by: Casey 03/11/2024
The team at etrailer helped me find the right parts for my trailer. They provided excellent customer service.
by: Paul 12/29/2023
I've had the hubs on for one year of use and they have performed perfectly. The price was good and delivery was timely. I'm very satisfied.
by: Joe05/11/2024
etrailer was very helpful. The hub that was sent turned out to be the wrong one for my trailer. A refund was promptly issued. The customer service was kind and helpful. I will definitely do business with etrailer again.
by: Lynes Special Delivery 09/20/2017
Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD
Lynes D.
9/20/2018
1 year - 35k miles Im still very happy with the set of idler and brake hubs, bearings are still rolling smooth. I only use 1 type of grease Lucas RedNTacky2, about every 1k miles pull the rubber plug, 1/2 pump of grease not too much or youll blow the seal! Most common problem people have! Ill be buying another set for the trailer Im building. Keep making people happy, Thankx LSD
by: Andrew 08/30/2023
I ordered on a Sunday to replace old 5x4.75 (uncommon size) hubs after discovering the new wheels and tires I ordered were 5x4.5 (common size) no I did not measure my old wheels. My old bearings were superseded by these bearings included in this kit. Assembly was a breeze. These were marked as shipped on SUNDAY! Thanks, you have my business.
by: Donald04/19/2020
Parts fit well and assembled easy, price was very fair. This is the 3rd time I've bought products from etrailer and have been pleased every time.
Thanks
Donald
4/22/2021
Good
by: Robert 11/21/2023
Great product, arrived a day earlier than expected with the free shipping option. Will buy again from etrailer when it’s time to do it again.
by: Check Bearing Sizes08/13/2023
The , order window for this product did not show the bearing sizes, and they shipped me the hub with wrong bearings, so I had to return it. Looking over the item description a 2nd time, It was difficult to locate the bearing sizes. That feature should be very visible for customers to find, so that they don't order the wrong size bearings.
by: James B04/05/2018
Thank you for your assistance with my purchase of new hubs for my boat trailer. They are exactly as described and they fit perfectly on my trailer. I am attaching a few photo's of the hubs installed. I would recommend your company to everyone who needs hubs........EXCELLENT SERVICE.
by: Bill07/05/2023
The hub assemblies I bought worked fine for my trailer, thank you Martha O. I was a little disappointed that I didn't get American made products but overall the Chinese parts fit fine. The packing left a little to be desired, one dust cap was dented and I had to do some filing on it before I could hammer it in to place. One roller bearing casing was also dented a small amount but the bearing was still smooth so I went ahead with it. The parts did travel from Missouri to California and the box was pretty beat up. Maybe etrailer could double bag the parts? The box did get here in just a few days so they shipping was good. I would buy these parts again if I ever needed to.
by: Charles 04/01/2024
Delivery was pretty fast and they didn't mess up my order.
by: Dominick10/11/2023
Absolutely excellent service and parts
by: Ron 02/12/2024
Received what I needed when I needed it. Very competitive price.
by: Paul05/26/2023
No castle nuts or washers with this
by: David 02/27/2024
Everything went together very easily
by: Brian 03/15/2024
Great service fast delivery.will use again for sure.
by: Kevin 06/18/2023
I have always had good service with etrailer but this time it appeared my order was going to be two weeks out on delivery which would of hampered my vacation. I contacted Gwen at etrailer asking if she could look into the delayed shipment, she was very professional and extremely nice stating she would look into the product shipping early but there was no promises. I received my order two days later, hats off to Gwen for saving my vacation
by: 03/08/2024
Great value
by: Steven S04/26/2021
Have not mounted on trailer yet, but test fitted. Exact fit part for 3500 lbs Road King boat trailer. All parts included as described on etrailer's website. One of the benefits from ordering with etrailer are the "how to" videos and their "ask an expert" forum.
Steven S.
4/27/2022
No issues
by: Eddie 07/03/2023
Love all the products I have purchased from E traile BUT until E trailer starts shipping with fed X or a faster delivery company other than the United States Postal Service, which is very slow. It cost me a weekend of no boating and almost missed out on Fourth of July boating.
by: Erik 02/16/2024
Great price and service, could package a little better. Couple dings on the studs.
by: Robert 07/19/2023
Bought 2 of these as an emergency fix if needed. Product was as described and appears to be of good quality. Came with every piece pictured and was shipped quickly. Only time will tell and hopefully I won't have to use them.
25
284
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Replacement Idler Hub for 3,500 lb Square Axle with 5 on 4-1/2 Bolt PatternThe bearings on your trailer match a 3,500 lb axle and the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K, but your grease seal is significantly smaller as this hub uses a grease seal with a 1.719" inner diameter. If you can verify that your grease seal inner diameter needs to be 1.6275" then you're looking for a specialty-type hub replacement and you'll need to reach out to your local RV dealer or trailer shop to help you with that, otherwise the idler hub I mentioned...
view full answer...
- Inner and Outer Bearing and Grease Seal for Older TrailerWe carry bearings, races and a seal that are very, very close to your measurements but not exact. For example, the inside bearing we carry is # L68149 and it has a 1.378" inner diameter; the correct race for this is # L68111. For the outer bearing we carry # L44649 which has a 1.063" inner diameter and the matching race is # L44610. Finally there is the grease seal, for which we carry # 58846 which has an inner diameter of 1.719". You could get all of these parts together on a new...
view full answer... - Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat TrailerThe UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com # AKIHUB-545-35-G-EZ-K. This is galvanized and will be the best option available for your trailer. This also includes both the inner and outer bearings, the grease seal, the grease cap, and the lug nuts.
view full answer... - Replacement Bearing Recommendation for H-1377 Idler HubYour H-1377 hub is for a standard 3,500 lb axle so I recommend replacing it using the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K which comes with the bearings, grease seal, lug nuts, and EZ Lube grease cap.
view full answer...
- Replacement Idler Hub for Hub Stamped With TMW 46210 1209It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub # AKIHUB-545-35-G-K for standard spindles or the Easy Grease Hub # AKIHUB-545-35-G-EZ-K if your spindle has a grease zerk on the end of the spindle. The 1209 may be a date code or batch type number the manufacturer used to identify and changes in materials or processing.
view full answer... - What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?Thanks so much for providing those details! Based on your bearing numbers, you definitely have a 3.5k axle with a 5 on 4-1/2 lug pattern. For replacement hubs, I recommend the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have standard spindles). Both...
view full answer... - What is The Replacement for Dexter 8-248 Idler HubI was able to verify for you what the correct replacement is for your Dexter 8-248 hub, and there is an option for standard or EZ Lube, as well as a galvanized option: - Dexter Trailer Idler Hub Assembly for 3,500 lb Axles # 84545BX - Dexter Trailer Idler Hub Assembly for 3,500 lb E-Z Lube Axles # 84545UC1-EZ - Easy Grease Trailer Idler Hub Assembly for 3,500 lb Axles - Galvanized # AKIHUB-545-35-G-EZ-K
view full answer... - Recommended Axle-Less System And Idler Hubs For Custom TrailerThe idler hub assembly you mentioned, part # AKIHUB-545-35-G-EZ-K would work well with the axles you referenced. This hub has a 5 on 4-1/2 wheel bolt pattern and has a weight capacity of 1,750 lbs. This hub includes the bearings, races, seal, grease cap, wheel bolts and lug nuts. Since you are building a custom trailer the axles you referenced, part # ASR2KHDS01 as another great choice and a little less expensive. These axles have a weight capacity of 2,000 lbs, have a straight spindle...
view full answer... - Galvanized Idler Hub That Fits Square #84 SpindleLet's start with the spindle and hub you asked about, and they are indeed compatible. Reason why is this spindle accepts hubs with inner bearing L68149 and outer bearing L44649, which is exactly what the Easy Grease hub you mentioned uses, so the two will work together: - Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K And as for the hanger kit and leaf springs you mentioned,...
view full answer... - Recommended 2200lb Axle That Uses 3500lb Hubs and BearingsI may have another option for you, but the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258 you were looking at uses inner and outer bearing # L44649 which is used for 2000lb hubs like the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 # 8-258-5UC1-EZ. If you would like to use 3500lb hubs I recommend the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Regular Tires - 2,200 lbs # ASR1THDS01 which...
view full answer... - How to Determine the Correct Replacement Hubs for a Boat TrailerTo determine which hubs would be best for your boat trailer there are a few things you will need to look at; the axle capacity on your boat trailer, the inner bearing number, outer bearing number, grease seal number, the bolt pattern of your wheels, and whether or not your trailer has brakes. If you do not know what your axle capacity is you can find it located on the axle itself. It is usually located towards the middle and will typically be stamped into the axle. The bearing and grease...
view full answer...
- Recommended Replacement Hubs for EZ Loader Trailer With Disc BrakesThe VIN doesn't give me really any information beyond what you already gave so I reached out to the manufacturer. You have the 3,700 lb axle, but it has the standard 3,500 lb spindle size based on the bearing numbers they gave me for your axle. I recommend the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K if you are just looking for the hub for a rotor to fit over, or # K08-435-05 if you are seeking an integrated rotor. The...
view full answer... - Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.For the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K, there isn't an exact size Bearing Buddy available. The Bearing Buddy protectors # BB1980A-SS are the closest to the 1.99 size you need. They all measure 1.980 inches diameter. This most likely will still work, however there is a 1/100ths of an inch difference that would allow some grease to work its way out.
view full answer... - Correct Replacement for UFP H-1377 Trailer HubThe Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part # AKIHUB-545-35-G-EZ-K is a direct replacement for a UFP H-1377.
view full answer... - What Stub Axle Matches Up with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube AxlesThe Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K is designed for 3,500 lb axles. This could mean either leaf spring or torsion axles. It sounds like you might have a torsion axle and are looking for a replacement spindle. Unfortunately, this is no something we can help with and I suggest reaching out to the axle manufacturer. If you have a leaf spring axle and are looking for a replacement spindle, you can browse through the selection below based on...
view full answer... - Availability of Trailer Hub for 3,500 lb Axle that has 5 on 4-1/2 inch Bolt PatternThe hub you referenced is not galvanized and we do not have any similar ones that are since that bolt pattern is a little unique.
view full answer... - Spare Idler Hub for 3,500 lb Axle With 5 on 4-1/2 Inch Bolt PatternFor a 3500 lb axle, the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K is the correct fit if you have the E-Z Lube spindles with the built in grease zerk. If you have standard spindles without the grease zerk, then you will want # AKIHUB-545-35-G-K. If you don't need the galvanized option or the EZ Lube option, then you can use # CE13511 which is pre-greased with a carrying case.
view full answer... - Recommended Replacement Hubs For A Towblazer Tow Dolly Based on the bearing numbers you gave me I recommend the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. These Marine-grade hubs are designed for trailer idler axles and fit 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. I recommend measuring your bolt pattern to ensure you do in fact have a 5 on 4-1/2...
view full answer... - Replacement Idler Hub for a Triton WCII Watersport TrailerAccording to my research I believe your Triton WCII watersport trailer has 3,500 lb axles and a 5-lug bolt pattern for the wheels, which means the following idler hub should fit: - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K To confirm if this fits or not you just need to compare the bearings and seal part numbers or sizes. This hub uses L68149 inner and L44649 outer bearings, and then has a grease seal with 1.719" inner and 2.565" outer diameters. As...
view full answer... - Spindle Nut Size For EZ Lube AxlesThe Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K does not come with the spindle nut. That would come with your axle. For a 3,500 lb axle you would want the Spindle Nut Kit for EZ Lube Axles # RG05-100. The Nut is a 1 inch nut with 14 threads. The socket or wrench needed for this is 1-1/2 inch. If you just want the nut # 6-191. For the retainer # 6-190.
view full answer... - Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-KThe correct Bearing Buddies to use with the trailer hub # AKIHUB-545-35-G-EZ-K that you referenced are part # BB1980A for chrome plated or part # BB1980A-SS for stainless steel.
view full answer... - Electric/Hydraulic Disc Brake System for Tandem Axle Boat Trailer Exposed to SaltwaterThe hub/rotors included in the # T4843800 are Dacromet coated. Dacromet has a 400-600 hour salt spray rating, which means it can withstand 400-600 hours of exposure before signs of corrosion begin to appear. Although stainless offers better corrosion resistance, the Titan kit would last you for awhile, especially if you do a good job of hosing the trailer off after exposure to salt water. The Titan # T4843800 is compatible with 3500 lb axles, and uses a L68149 inner and L44649 outer wheel...
view full answer... - Correct Replacement Idler Hub for Reliable SureLube 4,700 Lb AxleThe Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part # AKIHUB-545-35-G-EZ-K should work great on the Reliable SureLube 4,700 Lb Axle as the bearings are an exact match. The hub has a 5 on 4-1/2" lug pattern which is the most common and standard application so it should work well for you.
view full answer... - Recommended Replacement Hubs For a 2020 Tracker TrailStar Boat TrailerFrom what I could find out about the Super Lube Spindles, they will be much the same as the Dexter EZ-Lube style spindles, like the # TRU74FR. This will include a zerk/grease fitting on the end that allows a grease gun to attach to. With that being said, I recommend going with the etrailer.com Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K. This will have a 5 on 4-1/2 bolt pattern and will match your bearings as well. One of the big pluses with this hub, though, is that...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Kathleen M
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
4/12/2024
I am sorry that these were not the right size. Let me get you over to customer service. They will be asking for your original grease seal numbers, please have those available when they reach out.