Inner and Outer Bearing and Grease Seal for Older Trailer
Updated 06/22/2018 | Published 06/21/2018
Products Featured in This Question
Question:
I have single axle 1997 trailstar trailer for a 17 foot trackerboat that I want to change the bearings races and seals on. It has ez lube style spindles and had 2 rubber o rings that were all streched out and just hanging out on the very back of the spindle. It looks like there is a only one spot for an o ring so not sure If someone replaced it before me and just left the original one on there. The inside bearing was a L68148 the outer a L44648 and the grease seal is a nok ad2527e.. I am having trouble locating the correct grease seal the o ring as well as the L68148 bearing. my local trailer repair shop suggested I use a different hub that used a gs-1719dl grease seal however looking at the specs I think this wont seal correctly . my spindle specs are inner 1.38 outer 1.065 and seal surface 1.691 if you could help guide me to the right products to rebuild this properly I would really appreciate it.
asked by: Will
Expert Reply:
We carry bearings, races and a seal that are very, very close to your measurements but not exact.
For example, the inside bearing we carry is # L68149 and it has a 1.378" inner diameter; the correct race for this is # L68111.
For the outer bearing we carry # L44649 which has a 1.063" inner diameter and the matching race is # L44610.
Finally there is the grease seal, for which we carry # 58846 which has an inner diameter of 1.719".
You could get all of these parts together on a new hub at part # AKIHUB-545-35-G-EZ-K, for which I've added a link to a video review.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.38 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 640603315172
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: 68149
- Search Results: 68110
- Shop: Mounting Bolts and Hardware for 10" Single Brake Assembly
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Shop: Replacement Race - L68110
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Q&A: Recommended Torque Value For Installing Brake Assembly to 3500# Axle
- Q&A: What Race Does the L44649R Bearing Use
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Torque Spec for Tightening Replacement Brake Drum Mounting Bolt
- Shop: Mounting Hardware for 10" Brake Assemblies
- Video: Ultimate Overview of the Timken L68110 Replacement Race
- Search Results: l68149 bearing
- Search Results: race l68111 trailer bearings races seals caps
- Search Results: race l68110 trailer bearings races seals caps
- Search Results: l68148
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Trailer Wiring
- Q&A: What is the Best Grease for Trailer Bearings
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
on Trailer Bearings Races Seals Caps
