See what our Experts say about this Yakima Roof Rack

• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Will Yakima Roof Rack and Yakima SkyBox 21 Fit a 2018 Mercedes-Benz GLC300 with Flush Rails
  I'm not sure what Thule products you already have but there are roof rack options from Thule, as well as Yakima, that are compatible with your 2018 Mercedes-Benz GLC300 with the flush mounted rails. The Thule roof rack option includes the 47" WingBar Evo Bars # TH711220 Black or # TH711200 Silver, the Foot Pack # TH710601, and the Fit Kit # TH186020. The Yakima roof rack options include the 50" JetStream Bars # Y00425 Black, along with the RidgeLine Towers # Y00145 and Fit Kit # Y06022. When...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
  Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Recommended Roof Rack for 2024 Toyota Sienna
  For an extremely quiet roof rack that fits your 2024 Toyota Sienna I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and wind vibration. This means they will definitely be quiet compared to the factory crossbars. You can also add...
  view full answer...
• Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee Laredo
  I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Kuat Switch 4 Ski and Snowboard Carrier # KU94FR. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for Flush Mounted Rails on 2014 Lexus GX 460
  We can help you find the parts you're looking for, and really, if you're using a set of crossbars with T-slot mounting paired with accessories that mount in those channels the clearance from the roof won't be a factor. With that said, the Inno kit you mentioned would potentially work, but I do have something that has a bit taller towers to give you some extra clearance from the roof. I recommend using the Yakima Roof Rack for 2014 Lexus GX460 using parts # Y00425, # Y00145 and # Y28FR....
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• What is the Largest Cargo Box I Can Mount on My 2018 Jeep Grand Cherokee?
  The largest Thule cargo box that will fit your 2018 Jeep Grand Cherokee is the Thule Motion XT Rooftop Cargo Box - 22 cu ft - Titan Glossy # TH629907. If you want a Thule roof rack that is compatible with your 2018 Jeep Grand Cherokee that will be compatible with the Thule Motion XT, I recommend the following system: - Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400 - Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R - Fit Kit for Thule...
  view full answer...
• Rhino Rack 3 Bar Roof Rack that Fits 2021 Lexus GX 460
  The components you'd need to complete a Rhino Rack roof rack on your 2021 Lexus GX 460 are part numbers # RRVA126B-3, # RRRCH6, and # RRRCP23-BK. This does not require removal of the factory roof rails.
  view full answer...
• Roof Rack Recommendation for a 2019 Mercedes-Benz GLC 300
  For your 2019 Mercedes-Benz GLC 300 with the flush rails I recommend going with a Yakima JetStream roof rack because the crossbars are a lightweight aluminum and feature a rubber strip that doesn't have to be trimmed when using T-Slot accessories. This roof rack consists of the 50" JetStream bars # Y00425, along with the RidgeLine Towers # Y00145, and the RidgeClip Fit Kit # Y06022. Not only does this roof rack look very sleek but it also has a weight rating of 165 lbs so you can get...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• How to Fit Yakima Show Down Kayak Carrier on 2014 Subaru Outback with Factory Roof Rack
  The Yakima ShowDown kayak carrier part # Y04081 can fit your 2014 Subaru Outback Wagon but would require an aftermarket roof rack as it won't fit the factory bars. So for that Yakima recommends the Jetstream bar roof rack # Y00425 and # Y33TR which is a high quality and aerodynamic roof rack confirmed as a fit for your vehicle.
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• Roof Rack Recommendation for a 2021 Toyota RAV4 with Flush Rails and Moonroof Clearance
  For your application I recommend installing the Yakima JetStream roof rack on your 2021 Toyota RAV4 with flush rails: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 23 - # Y98FR You honestly shouldn't have any clearance issues with any roof rack when it comes to the moonroof, but the Yakima towers tend to sit on the higher end so you'll get as much clearance as possible. Most roof rack manufacturers don't recommend opening up a sun/moonroof with the roof...
  view full answer...
• Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-V
  For your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
  view full answer...
• 2025 Mini Countryman Roof Rack Recommendation for Flush Rails
  Hey Anderson, thanks for reaching out! I have a fit from Yakima that works for the flush rails on your 2025 Mini Countryman, and it includes these parts: - 50" Yakima JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y24AR - Lock Core Kit # Y07204 (optional) I've attached a photo that Yakima took when they tested this fit. What are you planning on using the roof rack for?
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack Fit on 2018 Dodge Durango With Sunroof & Naked Roof
  There is an option for a roof rack that will fit your 2018 Dodge Durango that has a sunroof & naked roof (which simply means no rails on top). The one that will fit is from Yakima and is made up of a few different parts: - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180 Not only is this Yakima rack a fit for your '18 Durango, but it will also give you the best roof rack you can get for...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Naked Roof Rack Recommendation for 2013 Honda CRV to Carry Longer Roof Box for Skis
  The naked roof racks that fit your 2013 Honda CR-V do put the front bar significantly closer to the windsheild like with the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK284 we have installed on a 2013 CR-V so this would be the way to go. I attached a picture that shows the front bar is more than the amount of inches forward that you would need plus an install video on a similar 2014 CR-V as well.
  view full answer...
  
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked Roof
  I went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima. Instead, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189. These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and is...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-V
  When you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• Does The Rola Rail Extreme Work With My 2019 Honda CR-V With A Naked Roof?
  The Rola Rail Extreme # R4002 comes with just the rails, so they will not work. In the product title you may have read "Flush Rise Rails" thinking it came with it. What that means is that the Rola Rail Extreme will mount to the flush side rails. These rails will not work with your Naked Roofed Honda CR-V but will work with most vehicles with raised side rails that are less that 47" apart. To get a roof rack on your 2019 Honda CR-V I recommend the following Yakima JetStream Crossbars:...
  view full answer...
• Roof Rack Recommendation with 60 Inch Crossbars for 2017 Honda CR-V with Naked Roof
  Rhino-Rack has their 59" Vortex Bars # RRVA150B-2 which are more likely to fit than their 65" Vortex bars for your 2017 Honda CR-V with a naked roof. The Vortex bars have limited space on the underside where they fit with the feet so even if you cut the 65" bars it wouldn't change where that spacing is at. Since Rhino-Rack hasn't tested and confirmed the fitment of the 59" bars on your CR-V I recommend going with the Yakima JetStream roof rack system instead. It uses crossbars that have...
  view full answer...
• Roof Rack Recommendation for Carrying 2 Heavy Kayaks on a 2018 Honda CR-V Naked Roof
  It looks like you have a naked roof on your 2018 Honda CR-V. Because of this, there is no Inno crossbar fit for your vehicle, but we do have alternate roof racks for you. As for the Thule option, the highest capacity of any Thule combination is 110 pounds (the lowest capacity component must be used, so the 165-pound capacity feet will still be hindered by smaller capacity components). In fact, the highest capacity of any combination available for your vehicle is 165 pounds. That is why...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
  I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
  view full answer...
  
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
  Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked Roof
  I went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima. Instead, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189. These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and is...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-V
  When you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
  view full answer...
• 2018 Porsche Macan Yakima Fit For Naked Roof
  The Yakima roof rack that will fit your 2018 Porsche Macan consists of the following; Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06163, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06189, and Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has two different...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• What is Needed For Platform on Roof Rack For 2021 Honda CR-V With Naked Roof
  Hey Bob, We can get your 2021 Honda CR-V with a naked roof set up with a platform that goes on a roof rack. For that all you'll need is the following: - Yakima BaseLine Roof Rack for Naked Roofs # Y62XB - Yakima LockNLoad Platform Rack for Crossbars - 55" Long x 49" Wide # Y05044-39 The LockNLoad will mount directly to the roof rack's crossbars, and I verified with Yakima the 55" x 49" is the correct fit for your CR-V.
  view full answer...

Do you have a question about this Roof Rack?