See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Recommended Crossbars to Mount a Thule Hullavator to a 2024 Subaru Outback Touring XT
  Bruce, to mount the Thule Hullavator # TH898 on your 2024 Subaru Outback Touring, you're just going to need to add a set of crossbars. I recommend going with an Aero style, personally, like the Thule WingBar Evo Crossbars # TH711120 with the feet # TH710601 and the fit kit # TH37CE. These aren't any more or less special than the others, but I think the shape of these bars are much nicer and it will work with about every accessory that requires bars to mount.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Should Yakima HD Crossbars Have Downward Bow in Middle
  Hey Bo, it is not normal for the Yakima 60 inch HD crossbars like the part # Y01156 to have a downward bow in the middle of them. They should be basically totally flat. I attached a picture of what they should look like for you to check out.
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Roof Rack System For 2023 Lexus GX 460
  Hello Mike. I am happy to find the right roof rack system for you but first I need a little more information about your Lexus GX 460. The rails that run from front to back, are the flush mounted or raised?
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Installing The Thule Hullavator On Yakima HD Crossbars On A 2021 Toyota Highlander
  The Yakima HD Crossbars # Y01156 will work with the Thule Hullavator # TH898. Based on the pictures you sent in it looks like you have the crossbars installed upside down. The end caps have an opening on the other side that lets you easily slide in t-slot accessories. You'll just need to unmount the crossbars from the towers, flip them over, and remount them to the towers. The screw seen in your pictures is what holds the endcaps in place. Removing those will allow you to remove the endcaps....
  view full answer...
  
• Recommended Roof Rack for a 2023 Kia Sorento w/ Raised Side Rails
  I would be happy to help you find a set of crossbars that will fit the factory raised rails of your 2023 Kia Sorento. This kit mounts directly to the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR HD Bar SL Adapter for Yakima TimberLine Towers - Qty 4 item # Y03541 This aero bar roof rack...
  view full answer...
  
• Can Two Thule Hullavators Be Used On A 2021 Toyota RAV4?
  I have a different kayak carrier option for you, but the Thule Hullavator # TH898 you mentioned are 36" long each and while a bit of them will hang over the end of the crossbars the longest crossbars available for your 2021 Toyota RAV4 are 55" so you will not have enough room. Instead I recommend going with the Hullavator on one side of the vehicle, and a standard carrier such as the Malone SeaWing W/Load Assist # MPG113MD one the other side as it is much lighter and quite a bit narrower. The...
  view full answer...
• What is the Dynamic Weight Capacity for the Yakima HD Crossbar System on a 2022 Subaru Outback?
  The maximum static weight capacity for the Yakima HD Crossbars # Y01156 along with the Timberline Towers # Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have a complete crossbar system, you will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine # Y03541. You also have the option to add Yakima Same-Key Lock cores # Y07204 to deter the theft of your crossbars.
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Compatibility of Mounting Bracket for Yakima Skyrise Tent with Yakima HD Crossbars
  This Replacement Mounting Bracket # 8880735 is for the Yakima SkyRise Rooftop Tent like # Y07437. These tents and their clamps are compatible with most aftermarket round, square, aero, and elliptical crossbars including Yakima HD crossbars like # Y01156. I recommend getting replacement lock cores # Y07204 as well so that you can use the same key with both your new bracket and your old brackets. If you know the key numbers of your other mounting brackets, you can order a single separate...
  view full answer...
• 2016 Lexus GX 460 Flush Mounted Rails Fit Kit
  For your 2016 Lexus GX 460, you will need the Landing Pad 30 for Yakima SkyLine And Control Towers - Qty 6, part # Y25ZR, and not a RidgeClip. This kit works for Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 part # Y01156. You will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03541. The last thing you will need is the Yakima RidgeLine Towers For Yakima Crossbars part # Y00145. This rack will have a weight limit...
  view full answer...
• Thule Hullavator Kayak Carrier Mounting Requirements
  To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
  view full answer...
  
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• What Crossbars Allow Me to Use the Hullavator # TH711420 on My 2022 RAV4 with Flush Rails?
  I recommend looking at the Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156, which also requires Towers # Y53TR, Adapter # Y03541, and Landing Pads # Y98FR. This will fit your 2022 Rav4 with flush factory rails and should give you 4" of crossbar overhang on each side to use the Hullavator. One way you can tell for sure is by measuring from mounting point to mounting point on your roof. If that measurement does not exceed 47 inches, the Hullavator will have enough length.
  view full answer...
• Do the Yakima HD Bars Fit A 2015 Lexus ES 350 With A Glass Sunroof?
  I went ahead and spoke with Yakima and they said that you actually can use the Yakima HD Crossbars # Y01156 with the BaseLine Towers for Yakima Crossbars # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 and the fit kits # Y06175 & # Y06160 with your 2015 Lexus ES 350 that has a glass roof. We list this as a "non-fit" due to the fact that you could potentially damage your sunroof while this system is installed, but it'll physically fit...
  view full answer...
  
• Heavy Duty Roof Rack Recommendation for 2021 Subaru Outback Wagon
  For your 2021 Subaru Outback Wagon the Yakima HD roof rack kit part # Y01156, # Y00148, # Y46VR, and Y03541 is a confirmed fit and would work great. This is a higher capacity roof rack that has crossbars that are rated for 220 lbs. This does not require removing the roof rails either. I attached install instructions link for this for you to check out as well.
  view full answer...
• Is Yakima MegaWarrior Cargo Basket Compatible With Yakima HD Crossbars
  You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080. The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064. As for the Yakima HD crossbars, they are available in a number of different sizes: 55 inches...
  view full answer...
• Lowest Profile Roof Rack that Fits 2022 Outback Wilderness
  The lowest profile roof rack that fits your 2022 Subaru Outback Wagon is the Rhino Rack Stealthbar roof rack part # JA7970 which will only add right at 1-3/8 inches.
  view full answer...
• Yakima HD Bar Roof Rack For A 2022 Lexus GX 460 With Factory Raised Rails And Fixed Mounting Points
  Yes, you certainly can use the fixed mounting points on the factory rails of your 2022 Lexus GX 460 to mount Yakima HD crossbars. To do so you will need the following parts; Crossbars - Yakima HD 55" # Y01156 Towers - Yakima Skyline # Y53TR HD Bar Adapter # Y03541 Landing Pad # Y25ZR The 55" HD bar will have minimal overhang on a 2022 Lexus GX 460. it will have a very nice clean, factory look once installed.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked Roof
  I went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima. Instead, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189. These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and is...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• Does The Rola Rail Extreme Work With My 2019 Honda CR-V With A Naked Roof?
  The Rola Rail Extreme # R4002 comes with just the rails, so they will not work. In the product title you may have read "Flush Rise Rails" thinking it came with it. What that means is that the Rola Rail Extreme will mount to the flush side rails. These rails will not work with your Naked Roofed Honda CR-V but will work with most vehicles with raised side rails that are less that 47" apart. To get a roof rack on your 2019 Honda CR-V I recommend the following Yakima JetStream Crossbars:...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-V
  When you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
  view full answer...
• Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L Case
  I recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
  view full answer...
• Is there an Inno Fit Kit for the 2018 Honda CR-V Naked Roof
  I spoke with Inno to check on this for you. There is not a fit kit available for the 2018 Honda CR-V naked roof from them so instead you will need to get a new roof rack from another manufacturer. I recommend using the Yakima JetStream Crossbars, part # Y00425. They're aero-style crossbars with T-slots so they're compatible with most accessories. To mount them, you'll need the BaseLine Towers, part # Y28TR, and the two fit kits, part # Y06188 and # Y06189. I've linked to a video review...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
  I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
  view full answer...
  
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
  Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• Recommended Quiet Crossbars For A 2018 Honda CR-V W/ A Naked Roof
  I went ahead and checked out the Yakima BaseLine and Skyline systems, and it does not appear that either of those are a fit for your 2018 Honda CR-V per Yakima. Instead, I recommend checking out the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 & # Y06189. These crossbars measure 50" long x 2-3/4" wide x 1-1/8" tall, have a maximum weight capacity of 165-lbs, and is...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• 2018 Porsche Macan Yakima Fit For Naked Roof
  The Yakima roof rack that will fit your 2018 Porsche Macan consists of the following; Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06163, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06189, and Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has two different...
  view full answer...
• Does The Rola Rail Extreme Work With My 2019 Honda CR-V With A Naked Roof?
  The Rola Rail Extreme # R4002 comes with just the rails, so they will not work. In the product title you may have read "Flush Rise Rails" thinking it came with it. What that means is that the Rola Rail Extreme will mount to the flush side rails. These rails will not work with your Naked Roofed Honda CR-V but will work with most vehicles with raised side rails that are less that 47" apart. To get a roof rack on your 2019 Honda CR-V I recommend the following Yakima JetStream Crossbars:...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...

Do you have a question about this Roof Rack?