See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails
  I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Will The Thule ProRide XT Roof Bike Rack Fit With Factory Honda Crossbars On A 2018 CR-V
  If you're talking about actual crossbars (running from side-to-side) and not factory rails (running from front-to-back) then yes the Thule ProRide XT # TH598004 will be a compatible fit. The factory honda crossbars are exactly like the Yakima Jetstream aero bars # Y56UV, as a compatible comparison. The clamps will allow you to easily install your rack in seconds, if you want a quick walk-through of this then check out the attached video below.
  view full answer...
• Recommended Roof Rack for a 2024 Ford Escape w/ No Roof Rails
  Congrats on the new SUV. It won't be a problem at all to add a roof rack to your 2024 Ford Escape that looks close to factory. To do so I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06152
  view full answer...
• Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150
  Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
  view full answer...
• Roof Rack Recommendation for 2021 Toyota Highlander with Naked Roof
  Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked Roof
  For your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Malibu Sedan w/ No Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevrolet Malibu with no roof rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06123 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• Roof Rack Recommendation for Carrying 2 Heavy Kayaks on a 2018 Honda CR-V Naked Roof
  It looks like you have a naked roof on your 2018 Honda CR-V. Because of this, there is no Inno crossbar fit for your vehicle, but we do have alternate roof racks for you. As for the Thule option, the highest capacity of any Thule combination is 110 pounds (the lowest capacity component must be used, so the 165-pound capacity feet will still be hindered by smaller capacity components). In fact, the highest capacity of any combination available for your vehicle is 165 pounds. That is why...
  view full answer...
• Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L Case
  I recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
  view full answer...
• Roof Rack Recommendation with 60 Inch Crossbars for 2017 Honda CR-V with Naked Roof
  Rhino-Rack has their 59" Vortex Bars # RRVA150B-2 which are more likely to fit than their 65" Vortex bars for your 2017 Honda CR-V with a naked roof. The Vortex bars have limited space on the underside where they fit with the feet so even if you cut the 65" bars it wouldn't change where that spacing is at. Since Rhino-Rack hasn't tested and confirmed the fitment of the 59" bars on your CR-V I recommend going with the Yakima JetStream roof rack system instead. It uses crossbars that have...
  view full answer...
• Is there an Inno Fit Kit for the 2018 Honda CR-V Naked Roof
  I spoke with Inno to check on this for you. There is not a fit kit available for the 2018 Honda CR-V naked roof from them so instead you will need to get a new roof rack from another manufacturer. I recommend using the Yakima JetStream Crossbars, part # Y00425. They're aero-style crossbars with T-slots so they're compatible with most accessories. To mount them, you'll need the BaseLine Towers, part # Y28TR, and the two fit kits, part # Y06188 and # Y06189. I've linked to a video review...
  view full answer...
• What is Crossbar Spread of Yakima Roof Rack that Fits 2020 Honda CR-V
  When you install the Yakima Baseline roof rack part numbers # Y00421, # Y28TR, # Y06188, and # Y06189 on your 2020 Honda CR-V the spread will be 39-3/4 inches. You have to install the rack at the exact width and specs that Yakima requires.
  view full answer...
• Recommended Yakima Roof Rack for a 2019 Honda CR-V w/ No Roof Rails
  I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162. The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked...
  view full answer...
• Yakima or Thule Roof Rack for 2019 Honda CR-V with Naked Roof
  When it comes to roof rack quality both Yakima and Thule are right there at the top. The Thule rack will be a little easier to install on your 2019 Honda CR-V and the crossbar design is pretty sweet but I like the Yakima brand because you can easily upgrade to larger crossbars with no issues, it has a similar-ish design in the abilities of the T-Slot that the Thule has, but my favorite part are the small adjustments in the legs that you make with the Yakima roof rack. Some people say...
  view full answer...
• Roof Rack For Rooftop Tent On A Honda CRV 2021 Hybrid
  The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189. This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty strong,...
  view full answer...
• Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
  I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
  view full answer...
  
• Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
  I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the Rear...
  view full answer...
• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
  Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
  Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y28TR, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
  view full answer...
• Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
  Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V with Naked Roof
  For your 2019 Honda CR-V with a naked roof I recommend going with the Yakima JetStream Roof Rack. This system consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06188 for the front Fit Kit, and # Y06189 for the rear. The aerodynamic bars on this system will allow for an extremely quiet ride and they have a 165 pound weight capacity. I have attached a video demonstration on the 2017 CR-V so you can get a good idea of what it will look like...
  view full answer...
  
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Are Yakima BaseClip Fit Kits Y06188 and Y06189 the Same as Yakima Baseclip 188 and 189?
  Yes, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06188 and # Y06189 are the same as the Yakima Baseclips 188 and 189, respectively. Both of these kits are a fit for a 2017 Honda CR-V.
  view full answer...
• Roof Rack Recommendation for 2018 Honda CR-V for Best Wind Resistance
  Since wind noise is a priority you will definitely want aero shaped crossbars for the roof rack you install on your 2018 Honda CR-V. We have a few options but the Yakima JetStream Kit part numbers # Y00425, # Y28TR, # Y06188, and # Y06189 would be the winner as it has the highest capacity of 165 lbs, has aero shaped bars, and has the shortest bars which also helps with wind noise. These bars are 50 inches in length.
  view full answer...
• Roof Rack for a Thule Hullavator # TH898 on a 2018 Honda CR-V
  In order to know what roof rack you need to use the Thule Hullavator # TH898 on your 2018 Honda CR-V, it depends on if you have flush factory rails or a bare roof on your vehicle. Also, the space between the feet where you install the crossbars is important as well. This is because the Thule Hullavator requires at least 4 inches of additional length past the feet in order to function. If you have flush rails, I recommend the following setup: - Yakima JetStream Crossbars - Aluminum -...
  view full answer...
• Can You Use Roof Rack Crossbars Wider Than The Roof Of A 2017 Honda CR-V
  The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425. To do this...
  view full answer...
• Parts Needed to Add Yakima Round Bar Roof Rack to 2020 Honda CR-V With Naked Roof
  You should be able to use your Yakima round crossbars to your 2020 Honda CR-V with a naked roof, so long as they are the right size in order to ensure there is enough room for them to cross the top of your vehicle, but also so they aren't so long they stick way out on the sides and become a hazard for people walking by. So you'll want to measure your crossbars to make sure you have the right size, as they should be the 48 inch bars. Here is exactly what you will need for a round bar Yakima...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked Roof
  For your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
  view full answer...
• Roof Rack Recommendation for a 2021 Honda CR-V
  A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts: - Yakima JetStream Crossbars - Aluminum # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189 - (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204 The reason why the Yakima setup is because the aerodynamic design...
  view full answer...
• Recommended Roof Rack for a 2021 Honda CR-V and Compatibility with Thule Accessories
  I'm glad to hear that you have had good experiences with our products! As for a roof rack for your 2021 Honda CR-V, I recommend the Yakima JetStream Crossbars, part # Y00425. They are aero-style bars that reduce wind drag and noise. To mount them to your roof, you will need the BaseLine Towers, part # Y28TR, and the two fit kits, # Y06188 and # Y06189. This system mount to a naked roof without rails (if you have rails, let me know), and as for the compatibility between brands, they are...
  view full answer...
• Can 60" Yakima HD or JetStream Crossbars Fit a 2021 Honda CR-V With Naked Roof?
  Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars. Yakima HD Crossbars # Y01157 BaseLine Towers # Y28TR HD Bar SL Adapter # Y03541 BaseClip Fit Kit # Y06188 BaseClip Fit Kit # Y06189 If you choose the 60" JetStream crossbars you would need the following parts. Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip...
  view full answer...
• Roof Rack for 2018 Honda CR-V With Bare Roof
  For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
  view full answer...
• Roof Rack Recommendation for Carrying 2 Heavy Kayaks on a 2018 Honda CR-V Naked Roof
  It looks like you have a naked roof on your 2018 Honda CR-V. Because of this, there is no Inno crossbar fit for your vehicle, but we do have alternate roof racks for you. As for the Thule option, the highest capacity of any Thule combination is 110 pounds (the lowest capacity component must be used, so the 165-pound capacity feet will still be hindered by smaller capacity components). In fact, the highest capacity of any combination available for your vehicle is 165 pounds. That is why...
  view full answer...
• 2018 Porsche Macan Yakima Fit For Naked Roof
  The Yakima roof rack that will fit your 2018 Porsche Macan consists of the following; Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06163, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06189, and Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has two different...
  view full answer...
• Recommeded Roof Rack And Crossbars For A 2017 Honda CR-V Carrying A Roam Adventure 95L Case
  I recommend first adding a set of crossbars like the Yakima JetStream Crossbars # Y00428 with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. Then I would add a platform roof rack like the Yakima LockNLoad Platform Roof Tray # Y05047. With this setup you will have no issue attaching your Roam Adventure 95L case to the roof of your 2017 Honda CR-V. Additionally, the mentioned crossbar towers and fit kit will only work...
  view full answer...
• Roof Rack Recommendation for 2020 Honda CR-V for Use with Rhino Rack Universal Load Assist
  Hey Michael, we have the Yakima flush bar roof rack part # Y26VD that is a confirmed fit for your 2020 Honda CR-V with a naked roof that is also compatible with the Rhino Rack Universal Load Assist # RR-RUSL. What kayaks do you have?
  view full answer...

Do you have a question about this Roof Rack?